GB/T 5211.1-2003 Determination of water-soluble matter in pigments - Cold extraction method

This standard specifies the general test method for determining the content of soluble matter in cold water of pigment samples. GB/T 5211.1-2003 Cold extraction method for determination of water-soluble matter in pigments GB/T5211.1-2003 Standard download decompression password: www.bzxz.net

GR/T 5211.1—-2003/ISO 787-8:20G0 This standard adopts the standard 150787:200 for the physical quality of materials with water-soluble substances. This standard replaces the cold extraction method specified in G.521.11 for pigments. The main technical differences between this standard and G.521.1-1DR are as follows: The original standard uses 1S07878:1570: This standard specifies the "centrifugal separation step"; this standard specifies the "conditions for the use of wetting agents"; this standard adds the following: "For some requirements of the joint guarantee" GB521 international standard
-03/T521..1 tidal water source determination method GF/T521.? Before the material water exchange method determination hot extraction GD/T 52:!..1
GH/1 62:1. 4
C3/T 5211.5
e/T 52-1.
G6/T 5211.9
GB/T 52:1. 10
.-..GH/5211.11
G8:1 5211, 12
/T52113
Determination of the content of 105% clinker
Determination of apparent density of loaded anti-mist agents
Determination of acid resistance of materials
Determination of resistance of pigments to water
Determination of wettability of cooking wine
Determination of resistance of materials to stone
Determination of oxides and nitrates in water
Determination of superpolar instantaneous energy
-B/T 52:1,14
Determination of the composition of pigments
G13/T 52II.15
Gh/T 5211. 16
GB/T 5211.17
Determination of the tinting power of gaseous pigments
Comparison of the color ratio (selectivity) of natural pigments GF/T5211.18
Determination of the tinting power of gaseous pigments
Comparison of the color ratio (selectivity) of natural pigments GF/T5211.19
Determination of the tint of small and medium-sized pigments by comparison methodWww.bzxZ.net
This standard is effective from the date of implementation of B311.185, and is proposed by the International Petrochemical Association: This standard is a comprehensive test method for the pigment standard. The origin of this standard is: China National Chemical Corporation Changzhou Coatings Chemical Research Institute. The principal is: Shen Ranjiangling. This standard was first revised and issued in 2008, and the first revision is 2018. 1. Specification GB/T 5211.12003/I50 78/-8.2000 Determination of water-soluble pigments by cold extraction method. This standard specifies the method for determining the content of water-soluble pigments in cold water. GB/Y5211.2 specifies the method for determining the content of water-soluble pigments by hot extraction method: For most materials and materials, these two test methods will produce different test results. Therefore, the company's technical requirements should clearly indicate the new method used, and indicate the new method used in the test report.
Note: This method is for the delivery of old materials and the delivery of clear materials. It is not necessary to indicate the cost of the material in the product specification and indicate the properties of the material; when the material is not fixed by the instrument, the material is measured in different ways.
2 Short references to medicinal properties
The following test documents can be used as the terms of this standard. The reference documents are dated, and any subsequent amendments (excluding errors) or static boards are not clear for use in this standard. However, all parties are encouraged to study whether the latest version of this document can be used according to this standard. See the referenced documents of the United States, the latest version of this standard is applicable, -9 color paint with new sample 421 || tt || 3 reagents || tt || water, fresh secondary natural water or to ask, cold room blue, small H is 67, night has the United States double time small call use some other rules. 4 instruments || tt || 4. 1 single scale bottle: wear me 250 9il., 4.2 thank the smooth through the wave instrument. || tt || note, the United States side is still, the use of its type of natural instrument. When the speed can be increased, please choose the paper: you can use the appropriate water first you accept the rate of the method model, other membrane fine collection can also be used, 4, 3 evaporation him; semi-corrosion, glass, gold, porcelain or silicon: dry to Kai before. =.4 Water bath heat maker.
4.5 Talk pen: can maintain the temperature of 5℃
2.6 days to n00
2. Dryer: effective drying agent. 5 Sampling
GB! 2S5 type, the most representative sample of the whole quantity, B step
B.1 total scale
parallel Xie wide two models
6.2 test melt
weigh (2~20) (accurate to 31g> sample () dry one burn weigh, R/T5211:1--2C03/I50787-8,2000 right to do science and teaching will be the water resources in the whole request for the test plate, these ten contain a lot of solvents The condensate product is special, any call to read, the annual test or between several different test cars said the dangerous room to take the sample of the night policy: E.3 determination
with milliliter water (Chapter 3 below back to the source of moisture or: and 0 water, in the room under the lake connected to the dig with two. The format into the penetration (41 in, and the water selection car car shop, the stock point device to let the judgment full warehouse: immediately talk about the film through the method device (4, 2 through the method, the station Mao returned to the Jiangchi device city piece to the tour equipment slide ||tt| |: If the material is made in water, it can be used. In the case of frequency material not suitable for oneself, it can be used with people; in the case of deep ethanol, the source can be used to separate the agent from the actual mountain and the party can also be scalded and dropped on the plate to start the treatment: the post must also be treated (the result is > when the explosion reaches the correct level). The whole material can be separated by a device. Take 10 full-clear gradually or centrifuge to separate the full amount of vegetable hair (clean and start in the actual standard hair (4.1). F. Primary hair.
In the first (4.5) in the British at <105 = 2) ℃ in the ten elements in the blood, after the medium in the process (1.7) weigh it (accurate to, electric heating, the layer of water density value is not much different from the maximum value of the hand as the heat can be less than the center i, the residual mass (! The last weighing of the whole dimension in the relatively large value of the water depth of the result of the calculation of the Le
use the following formula to calculate the water rate (the most control method to set the number of methods: m, = mg X2. 5
, sample mass, unit is gram ():
m, residual substance or, unit is (). :
If the difference between the results of the first and second tests is calculated and reported, and the result is greater than % ·, then the second and second test results are determined and reported as a technical average. If the third test result is equal to the actual value and the lower value is 10%, the test result should be used in the same way as the test result. tt||Results report:
Daily test report
The test report should include the following information carefully:State the national standard for the product:
The quantity required for the product:Test results:New
)New test sheet:
Type of water used:
The type of people swimming and
The type of new river is divided into the following:h)
The low performance of the test method is different from the existing test method,i test period.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.