JB/T 5824.3-1991 Classification and codes of special equipment for wires and cables

This standard specifies the classification of auxiliary devices for wire and cable special equipment. JB/T 5824.3-1991 Classification and code of wire and cable special equipment products JB/T5824.3-1991 Standard download decompression password: www.bzxz.net

Mechanical Industry Standard of the People's Republic of China
Special Equipment for Wires and Cables
Product Category Division and Code
Part 3
Auxiliary Devices
1 Subject Content and Scope of Application
1.1 This standard specifies the classification of product categories of auxiliary devices for special equipment for wires and cables. 1.2 This standard is applicable to the compilation of auxiliary device models for special equipment for wires and cables JB/T5824.3-91
1.3 The provisions of this standard shall comply with the requirements of JB/T5824.1-91 Classification and Code of Special Equipment for Wires and Cables Part 1
General Provisions.
2 Classification and Code
The classification and code of auxiliary devices shall comply with the provisions of Table 1. Table 1
Auxiliary device
Smelting furnace
Paying-off device
1991-10-17 approval number of the Ministry of Machinery and Electronics Industry
Induction type
Reflection type
Direct heating type
Active type
Passive type
199210-01 implementation
Wire collection (arranging) rod device
Coiling device
Traction device
Annealing device
Wrapping device
JB/T582 4.3-91
Continued Table 1
Guided type
Winding type
Wheel belt type
Crawler type
Continuous type
Ordinary type
Plane type
Semi-tangent type
Tangent type
Concentric type
Host linkage
Single drive
Host linkage
Single drivebZxz.net
Resistance type
Induction type
Water seal type
Non-metal belt||tt ||Metal belt
Non-metal belt
Metal belt
Non-metal belt
Metal belt
Non-metal belt
Non-metal belt
Metal belt
Printing device
Reel handling device
Wire storage device
Circulating lubrication device
Oil filling device
Crimping head die-piercing device
Drying device
Feeding device
Additional instructions:
JB/T5842.3 —91
Continued Table 1
Contact wheel type
Nozzle type
Conveyor belt
Manipulator
Cold pressure welding
This standard is proposed and managed by Shanghai Cable Research Institute of the Ministry of Machinery and Electronics Industry. This standard is drafted by Shanghai Cable Research Institute and other units. The main drafters of this standard are Ou Xuecheng and Wang Yuhui. List
Centrifugal type
Filter belt type
Hot air type
Steam type
Vacuum type
Tipping bucket type
Spiral type
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.