JB/T 4368.2-1996 CNC horizontal lathe parameters
time:
1996-04-11 15:00:00
- JB/T 4368.2-1996
- in force
Standard ID:
JB/T 4368.2-1996
Standard Name:
CNC horizontal lathe parameters
Chinese Name:
数控卧式车床 参数
Standard category:
Machinery Industry Standard (JB)
-
Date of Release:
1996-04-11 -
Date of Implementation:
1996-10-01
China Standard Classification Number:
Machinery>>Metal cutting machine tools>>J53 lathe
Drafting Organization:
沈阳自动车床研究所Focal point Organization:
沈阳自动车床研究所、沈阳车床研究所Proposing Organization:
National Metal Cutting Machine Tool Standardization Technical CommitteePublishing Department:
Ministry of Machinery Industry of the People's Republic of China
Description (Translated English) / downloadSkip to download
Summary:
This standard specifies the parameters of CNC horizontal lathes. This standard applies to newly designed chuck-type CNC horizontal lathes with a maximum turning diameter of 200 to 1000mm and a processing length of 5000mm, and bar-type CNC horizontal lathes with a maximum bar diameter of 25 to 63mm. JB/T 4368.2-1996 CNC horizontal lathe parameters JB/T4368.2-1996 Standard download and decompression password: www.bzxz.net
Standard contentSome standard content:
Mechanical Industry Standard of the People's Republic of China
CNC Horizontal Lathe
Subject Content and Scope of Application
This standard specifies the parameters of CNC horizontal lathes. Parameters
JB/T 4368.2—96
This standard applies to newly designed chuck-type CNC horizontal lathes with a maximum turning diameter of 200~1000mm and a maximum turning length of 5000mm and bar-type CNC horizontal lathes with a maximum bar diameter of 25~63mm. Reference Standards
GB5900.1~~5900.3 Interchangeability Dimensions of Flange-type Spindle Ends and Faceplates for Machine Tools
3 Parameters
3.1 Parameters of Chuck-type CNC Horizontal Lathe
The type of chuck-type CNC horizontal lathe is shown in Figure 1, and the parameters should comply with the provisions of Table 1. Fig. 1 Chuck type CNC horizontal lathe
Table 1 Chuck type CNC horizontal lathe parameter table
Maximum turning diameter
Maximum front turning length L1\mm
Spindle end type and code
GB5900
Spindle diameter
200-750
400-2000500--2500|630--3000800--4000|1000-50000300--1500
250--1000
5, 6, 8
Note: 1) The maximum turning length is recommended to be arranged in arithmetic progression. 3.2 Parameters of bar-type CNC horizontal lathes
The type of bar-type CNC horizontal lathes is shown in Figure 2. The parameters should comply with the provisions of Table 2. Approved by the Ministry of Machinery Industry of the People's Republic of China on April 11, 1996 11, 1.5, 20
1996-10-01 Implementation
Maximum bar diameter dmm
Maximum turning length L\
Spindle end type and code GB5900
Spindle diameter
JB/T4368.2--96
Figure 2 Bar-type CNC horizontal lathe
Table 2 Bar-type CNC horizontal lathe parameter tableWww.bzxZ.net
25~～100
Note: 1) The maximum turning length L is recommended to be arranged in arithmetic progression Additional remarks:
32~150
This standard is proposed by the National Technical Committee for Standardization of Metal Cutting Machine Tools. This standard is under the jurisdiction of Shenyang Automatic Lathe Research Institute and Shenyang Lathe Research Institute. This standard was drafted by Shenyang Automatic Lathe Research Institute. 34
40~400
Self-determined
63-300
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
CNC Horizontal Lathe
Subject Content and Scope of Application
This standard specifies the parameters of CNC horizontal lathes. Parameters
JB/T 4368.2—96
This standard applies to newly designed chuck-type CNC horizontal lathes with a maximum turning diameter of 200~1000mm and a maximum turning length of 5000mm and bar-type CNC horizontal lathes with a maximum bar diameter of 25~63mm. Reference Standards
GB5900.1~~5900.3 Interchangeability Dimensions of Flange-type Spindle Ends and Faceplates for Machine Tools
3 Parameters
3.1 Parameters of Chuck-type CNC Horizontal Lathe
The type of chuck-type CNC horizontal lathe is shown in Figure 1, and the parameters should comply with the provisions of Table 1. Fig. 1 Chuck type CNC horizontal lathe
Table 1 Chuck type CNC horizontal lathe parameter table
Maximum turning diameter
Maximum front turning length L1\mm
Spindle end type and code
GB5900
Spindle diameter
200-750
400-2000500--2500|630--3000800--4000|1000-50000300--1500
250--1000
5, 6, 8
Note: 1) The maximum turning length is recommended to be arranged in arithmetic progression. 3.2 Parameters of bar-type CNC horizontal lathes
The type of bar-type CNC horizontal lathes is shown in Figure 2. The parameters should comply with the provisions of Table 2. Approved by the Ministry of Machinery Industry of the People's Republic of China on April 11, 1996 11, 1.5, 20
1996-10-01 Implementation
Maximum bar diameter dmm
Maximum turning length L\
Spindle end type and code GB5900
Spindle diameter
JB/T4368.2--96
Figure 2 Bar-type CNC horizontal lathe
Table 2 Bar-type CNC horizontal lathe parameter tableWww.bzxZ.net
25~～100
Note: 1) The maximum turning length L is recommended to be arranged in arithmetic progression Additional remarks:
32~150
This standard is proposed by the National Technical Committee for Standardization of Metal Cutting Machine Tools. This standard is under the jurisdiction of Shenyang Automatic Lathe Research Institute and Shenyang Lathe Research Institute. This standard was drafted by Shenyang Automatic Lathe Research Institute. 34
40~400
Self-determined
63-300
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
- Recommended standards
- JB/T 8133.15-1999 Test methods for physical and chemical properties of electric carbon products - Porosity
- GB/T 19557.3-2004 Guidelines for the conduct of tests for distinctness,uniformity and stability Durum wheat
- JB/T 3687.2-1999 Technical requirements for bench-type vibrating screens for mining
- QB/T 2242-1996 Santal ether
- JB/T 8114.1-1999 Electromagnetic vibrating feeder types and basic parameters
- GB/T 15000.7-1997 Directives for the work of reference materials(7). Quality system for the production of reference materials
- GBZ 125-2002 Standard for sanitary protection of instruments containing sealed sources
- NY/T 1094.3-2006 Wheat experimental milling Part 3: Buehler method for soft wheat short-extraction flour
- JB/T 6659-1993 Dimension series and tolerances of O-rings for pneumatic applications
- GB/T 2423.29-1999 Environmental testing for electric and electronic products--Part 2:Test methods--Test U:Robustness of terminations and integral mounting devices
- JB/T 1590-1996 Method for compiling product models of rock drilling machinery and pneumatic tools
- JB/T 9169.7-1998 Process Management Guidelines Standardization Review of Process Documents
- GB/T 19889.7-2005 Acoustics—Measurement of sound insulation in buildings and of building elements—Part 7:Field measurements of impact sound insulation of floors
- JB/T 6296.7-1992 Steam turbine pipe accessories screw plug
- CJJ 7-1985 Specification for Urban Geophysical Exploration CJJ7-85
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail：[email protected]