JB/T 9163.13-1999 Dimensions of taper gear grinding spindles

JB/T 9163.13-1999 JB/T 9163.13-1999 Taper Gear Gear Mandrel Dimensions JB/T9163.13-1999 Standard download decompression password: www.bzxz.net

ICS 25. 080. 01
Standard of the Machinery Industry of the People's Republic of China
JB/T9163.1~9163.20--1999
Fixtures and attachments for gear cutting machine
1999-05-20 Issued
Approved by the State Administration of Machinery Industry
2000-01-01 Implementation
Standard of the Machinery Industry of the People's Republic of China
Taper mandrels for gear grinding spindles
JB/1 9163.13—1999
代禁7R J52 002.1.31 -87
This standard specifies the types and dimensions of diffuse toothed mandrels, and is applicable to the gears with a precision of less than grade 1 specified in GB/T10095-19 and a positioning diameter of .5-BO mm. 2 Types and dimensions
The types and dimensions shall be as specified in the following figures and tables. Applicable door L state law is 15 = [Bmm
Applicable parts aperture is 9-50mm
Applicable door 1 diameter is 52-8D2m
Approved by the National Machinery Industry Bureau on 1999-05-20
Implementation on 2000-01-01
Public compensation point diameter
【Applicable original 1. Allowable point diameter
19 042
31 022
22 022
[B/T9163.13—199ywwW.bzxz.Net
Conclusion of this generation card
Breakage difference
Life insurance Yijing
[Applicable second work diameter]
J8/T 9163.13—1999
installation (close
dial limit difference (
.4549.
48 :49
33 102
670156
..72.032
754012
mark ladder:
JE9163.13—19y
nominal diameter 40mm,
pin Tang out of the mandrel mark
rate tooth mandrel 4(-IJBT916313-.1999
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.