
GB 16487.3-1996 Imported waste environmental protection control standard wood and wood product waste
time:
1996-07-29 15:00:00
- GB 16487.3-1996
- Abolished
Standard ID:
GB 16487.3-1996
Standard Name:
Imported waste environmental protection control standard wood and wood product waste
Chinese Name:
进口废物环境保护控制标准 木、木制品废料
Standard category:
National Standard (GB)
-
Date of Release:
1996-07-29 -
Date of Implementation:
1996-08-01 -
Date of Expiration:
2006-02-01
Standard ICS number:
Environmental Protection, Health and Safety>>13.030 WasteChina Standard Classification Number:
Environmental Protection>>Pollutant Emission Standards>>Z70 Toxic Solid Waste Control Standard
alternative situation:
Replaced by GB 16487.3-2005
Review date:
2004-10-14Drafting Organization:
National Environmental Protection Administration Pollution Control DepartmentFocal point Organization:
State Environmental Protection AdministrationPublishing Department:
National Environmental Protection AgencyCompetent Authority:
State Environmental Protection Administration

Skip to download
Summary:
GB 16487.3-1996 Imported waste environmental protection control standard wood and wood product waste GB16487.3-1996 Standard download and decompression password: www.bzxz.net

Some standard content:
GB16487.3-1996 | and environmental pollution caused by hazardous waste contained in wood product waste. This standard will be implemented on a trial basis from August 1, 1996. This standard is proposed by the Pollution Control Department of the National Environmental Protection Administration. The National Environmental Protection Administration is responsible for interpreting this standard. 1Scope
National Standard of the People's Republic of China
Environmental protection control standard for imported waste
Wood and wood product waste
(Trial)
Environmental protection control standardfor imported scrap material |
This standard applies to the import of the following two types of wood. Customs commodity number
4401.3000
4501.9000
2 Reference standards
Waste name
Sawdust, wood waste and fragments, whether or not bonded into log segments , blocks, sheets or similar shapes
Softwood waste, shredded, granular or powdery softwood SN0572-1996 Inspection regulations for imported wood and wood product waste that can be used as raw materials (Trial) GB5085.3-1996 Hazardous waste Identification standard leaching toxicity identification GB8703-88 Radiation protection regulations
GB/T15555.1~~15555.12--1995Www.bzxZ.net
5 Solid waste leaching toxicity determination method
3 Definitions||tt| |This standard adopts the following definition:
Entrained waste
refers to the waste materials mixed into imported waste wood during the collection, packaging and transportation processes (excluding the packaging of imported waste wood and during transportation other substances that need to be used).
4 Control Standards and Requirements
4.1 Imported waste wood is prohibited from being mixed with entrained waste whose concentration of hazardous substances in the leachate exceeds the identification standard value in GB5085.3·1996.
4.2 It is prohibited to mix imported waste wood with entrained waste whose leachate pH value is equal to or greater than 12.5 and equal to or less than 2. 4.3 It is prohibited to carry radioactive waste in the waste wood. 4.4 The total beta specific activity value of imported waste wood shall not exceed 600Bq/kg. 4.5 The total weight of the following wastes contained in imported waste wood shall not exceed one ten thousandth of the weight of imported waste wood: National Environmental Protection Administration approved on July 29, 1996 and implemented on August 01, 1996
a) Pesticides and herbicides Waste;
b) Photosensitive material waste;
c) Explosive waste;
d) Asbestos waste;
e) Various liquid substances;||tt ||f) Clinical waste:
g) Bathroom waste, kitchen waste;
h) Clothing, etc.
GB16487.3—1996
6 In addition to the wastes listed in the above items, other entrained wastes in imported waste wood that cannot be directly utilized during their processing and utilization (such as waste 4.6||tt| |The total weight of metal, waste paper, waste plastic, waste glass, dirt and severely rotten waste wood, etc.) shall not exceed 3% of the weight of imported waste wood. 5 Inspection
5.1 The inspections in Articles 4.1 and 4.2 of this standard shall be carried out in accordance with the provisions of GB/T15555.1~~15555.12-1995. 5.2 The inspections in Articles 4.3 and 4.4 of this standard shall be carried out in accordance with the provisions of GB8703-88. 3 The inspection of other provisions of this standard shall be carried out in accordance with the provisions of SN0572-1996. 5.3
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
National Standard of the People's Republic of China
Environmental protection control standard for imported waste
Wood and wood product waste
(Trial)
Environmental protection control standardfor imported scrap material |
This standard applies to the import of the following two types of wood. Customs commodity number
4401.3000
4501.9000
2 Reference standards
Waste name
Sawdust, wood waste and fragments, whether or not bonded into log segments , blocks, sheets or similar shapes
Softwood waste, shredded, granular or powdery softwood SN0572-1996 Inspection regulations for imported wood and wood product waste that can be used as raw materials (Trial) GB5085.3-1996 Hazardous waste Identification standard leaching toxicity identification GB8703-88 Radiation protection regulations
GB/T15555.1~~15555.12--1995Www.bzxZ.net
5 Solid waste leaching toxicity determination method
3 Definitions||tt| |This standard adopts the following definition:
Entrained waste
refers to the waste materials mixed into imported waste wood during the collection, packaging and transportation processes (excluding the packaging of imported waste wood and during transportation other substances that need to be used).
4 Control Standards and Requirements
4.1 Imported waste wood is prohibited from being mixed with entrained waste whose concentration of hazardous substances in the leachate exceeds the identification standard value in GB5085.3·1996.
4.2 It is prohibited to mix imported waste wood with entrained waste whose leachate pH value is equal to or greater than 12.5 and equal to or less than 2. 4.3 It is prohibited to carry radioactive waste in the waste wood. 4.4 The total beta specific activity value of imported waste wood shall not exceed 600Bq/kg. 4.5 The total weight of the following wastes contained in imported waste wood shall not exceed one ten thousandth of the weight of imported waste wood: National Environmental Protection Administration approved on July 29, 1996 and implemented on August 01, 1996
a) Pesticides and herbicides Waste;
b) Photosensitive material waste;
c) Explosive waste;
d) Asbestos waste;
e) Various liquid substances;||tt ||f) Clinical waste:
g) Bathroom waste, kitchen waste;
h) Clothing, etc.
GB16487.3—1996
6 In addition to the wastes listed in the above items, other entrained wastes in imported waste wood that cannot be directly utilized during their processing and utilization (such as waste 4.6||tt| |The total weight of metal, waste paper, waste plastic, waste glass, dirt and severely rotten waste wood, etc.) shall not exceed 3% of the weight of imported waste wood. 5 Inspection
5.1 The inspections in Articles 4.1 and 4.2 of this standard shall be carried out in accordance with the provisions of GB/T15555.1~~15555.12-1995. 5.2 The inspections in Articles 4.3 and 4.4 of this standard shall be carried out in accordance with the provisions of GB8703-88. 3 The inspection of other provisions of this standard shall be carried out in accordance with the provisions of SN0572-1996. 5.3
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
- Recommended standards
- GB/T 15970.5-1998 Corrosion of metals and alloys - Stress corrosion testing - Part 5: Preparation and application of C-ring specimens
- JB/T 5279-1998 Vibrating fluidized bed dryer
- GB 19210-2003 Specification for cleaning of air conditioning and ventilation systems
- HG 21533-1995 Normal pressure quick opening hand hole. Attached picture
- GB 12685-1990 Tricyclazole technical
- GB/T 3903.3-1994 General test methods for footwear - Peel strength test method
- JB/T 10329.2-2002 Electric fusion external machining machine tools Part 2:
- QB/T 1558.2-1992 Bench vise - Ordinary bench vise
- GB 19156-2003 General technical requirements for fire monitors
- GB/T 15829.1-1995 Classification, marking and packaging of flux for soldering
- JB/T 4278.7-1993 Rubber and plastic wire and cable test equipment verification method Constant temperature water bath
- GB/T 15936.5-1996 Information processing text and office systems Office document architecture (ODA) and interchange formats Part 5: Office document interchange format (ODIF)
- QB/T 2630.2-2004 Gold decoration painting Part 2: Gold layer of gold leaf painting
- HG 3550-1990 A110 series ammonia synthesis catalyst
- GBZ 125-2002 Standard for sanitary protection of instruments containing sealed sources
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail:bzxznet@163.com