GB/T 545-1996 Naval anchor

This standard specifies the product classification and technical requirements of naval anchors. This standard applies to anchors for small ships and positioning anchors for engineering ships. GB/T 545-1996 Naval Anchor GB/T545-1996 Standard download decompression password: www.bzxz.net

IC547.020.5C
National Standard of the People's Republic of China
GB/T 5451996
Navy anchor
Admiralt yanchor
Issued on March 28, 1996
Implementation on November 1, 1996
Issued by the State Bureau of Technical Supervision
National Standard of the People's Republic of China
Admiralty anchcrwww.bzxz.net
1 Subject content and scope of application
This standard specifies the product classification and technical requirements of naval anchors. This standard is applicable to the positioning work of ships and missile launchers. 2 Reference standards
GD517 Pin unloading type and size
GB545 Anchor technical conditions
3 Product classification
3. The product type, specification and basic size of the military error are as shown in Figure 1 and Table 1. The State Bureau of Technical Supervision approved GB/T545-1996 on March 28, 1996. 1101 implementation
G0/T545-1996
Product you: 2 horizontal, 3 limit plate, 4 product teacher: 5 civil shackle H-type buckle
refers to the nominal drawing plate
4 5:1G
3.2 Marking example
GB/T545-1996
Name of the product: 1c5sg with type a pin shackle: 1009CB/T545-1556
Gradually anchor
4 Technical requirements
4.1 The following methods are allowed to be used for welding and manufacturing: 2: The lower pin and the staggered head are respectively welded at the joint; h. The upper surface and the tip of the account are respectively welded after cleaning. 533
4 32 yuan
nl or b]
m or h1
e5 or b
n5 or 65
a6 into h5
al0 or b;0
912 Or b.2-
a13 or h13
Eye plate is used for storage of more than 10kg + lifting evaluation. For storage with a weight of 3,7 or 1kg, the eye plate for storage and 4:2
lifting pressure can be installed without installation. 1.3 The other technical requirements of the navy shipbuilding industry are in accordance with the provisions of GB548. 3
Additional remarks:
This standard was proposed by China Shipbuilding Industry Corporation. This standard is in accordance with the import and export of Jiangnan Shipyard.
CB/T545-1996
This standard was drafted by the Seventh Institute of the Seventh Institute of the General Administration of Shipbuilding Industry of China. The main author of this standard is Chen Dingsan, and the use of the relevant room
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.