JB/T 3592.1-1999 Basic parameters of automatic cold heading machine for steel balls

JB/T 3592.1-1999 This standard is a revision of JB 3057-82 "Basic parameters of automatic cold heading machine for steel balls". This standard specifies the basic parameters of automatic cold heading machine for steel balls. This standard is applicable to automatic cold heading machine for steel balls for cold heading of steel ball blanks. The ultimate tensile strength of the workpiece material is equal to 750MPa. In order to expand the processing range of the machine, the machine can also be used for hot heading of steel balls. This standard was first issued in April 1982. JB/T 3592.1-1999 Basic parameters of automatic cold heading machine for steel balls JB/T3592.1-1999 Standard download decompression password: www.bzxz.net

ICS25.120.10
Machinery Industry Standard of the People's Republic of China
JB/T3592.1-1999
Basic Parameters
Automatic Cold Heading Machine for Steel Balls
Published on 1999-05-14
National Bureau of Machinery Industry
Implemented on 2000-01-01
JB/T35921-1999
This standard is a revision of JB305782 "Basic Parameters of Automatic Cold Heading Machine for Steel Balls". The technical content of this standard is basically consistent with that of JB3057-82, and it has only been re-edited according to relevant regulations. This standard shall be implemented from January 1, 2000
This standard shall replace JB3057-82 from the date of implementation. This standard is proposed and managed by the National Technical Committee for Standardization of Forging Machinery. This standard was drafted by: Qiqihar Automatic Forging Press Research Institute. The main drafters of this standard are: Yang Jingyuan and Gong Zhengrong. This standard was first issued in April 1982.
Mechanical Industry Standard of the People's Republic of China
Automatic Cold Heading Machine for Steel Balls
Basic Parameters
This standard specifies the basic parameters of automatic cold heading machines for steel balls. JB/T3592.1-1999
Replaces JB3057-82
This standard applies to automatic cold heading machines for steel balls with rough cold heading steel balls, and the tensile strength of the workpiece material is g75MPa. In order to expand the processing range of the machine, the machine can also be used to heat steel balls. 2 Basic Parameters
The main parameter of the automatic cold heading machine for steel balls is the maximum diameter of the steel balls. The basic parameters of the automatic cold heading machine for steel balls shall comply with the provisions of Table 1. Table 1
Maximum diameter D of steel ball
Maximum diameter D of cold forged steel ball roughness,
Maximum diameter d of wire
Maximum cutting length L
Approved by the State Machinery Industry Bureau on 1999-05-145bzxZ.net
Implementation on 2000-01-01
Mechanical industry standard
Basic parameters of automatic cold heading machine for steel ball
JB/T359211999
Machine Published and distributed by the Machinery Standardization Research Institute of the Ministry of Machinery Industry Printed by the Machinery Standardization Research Institute of the Ministry of Machinery Industry (No. 2, Shouti South Road, Beijing: Postal Code 100044)*
1/16 Printing sheet 1/4 Number of words 4000
Format 880×1230
First printing in September 1999
First edition in September 1999
Print run 1-500
Price 500 yuan
99-512
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.