16mm negative photographic sound record on 16mm motion-picture film--Positions and dimensions
time:
2024-07-13 09:03:18
- GB/T 4643-1984
- Abolished
Standard ID:
GB/T 4643-1984
Standard Name:
16mm negative photographic sound record on 16mm motion-picture film--Positions and dimensions
Chinese Name:
16mm电影光学声带负片的录音位置和尺寸
Standard category:
National Standard (GB)
-
Date of Release:
1984-08-14 -
Date of Implementation:
1985-05-01 -
Date of Expiration:
2003-05-01
Standard ICS number:
Imaging technology>>Movies>>37.060.20 Motion picture films, cassettesChina Standard Classification Number:
Comprehensive>>Economy, Culture>>A15 Film and Photography Technology
alternative situation:
Replaced by GB/T 4643-2002Procurement status:
ISO 71-1977 NEQ
Skip to download
Summary:
GB/T 4643-1984 16mm motion picture optical soundtrack negative recording position and dimensions GB/T4643-1984 standard download decompression password: www.bzxz.net
Some standard content:
National Standard of the People's Republic of China
16mm negative photographic
sound record on t6mm motion -picture film-Positions and dimensions
This standard applies to the sound recording of 16mm motion -picture optical sound negative film. UDC778.534.45
GB4643--8.4
This standard adopts the international standard 1S071-1977 "Movie-16mm negative optical sound recording sound on 16mm, 35/16mm and 35/32mm film positions and dimensions". This standard specifies the sound recording positions and dimensions of 16mm motion -picture optical sound negative film. 1 Grain mask on the emulsion side
The emulsion side of the film faces the observer.
2 Dimensions
The dimensions are shown in the following figure and table.
B" type film
Running direction
Reference edge
" type film
Running direction
Note: ① The reference edge of the film faces the observer, which is called "A" type film. ② The reference edge of the film is away from the observer, which is called "B" type film. SizeWww.bzxZ.net
Published by the National Bureau of Standards on August 14, 1984
11.48 ± 0.03
15.97 ± 0.03
Implemented on May 1, 1985
Additional notes:
GB4643 B4
This standard was proposed by the Ministry of Culture of the People's Republic of China and is under the jurisdiction of the China Film Science and Technology Research Institute of the Ministry of Culture. The China Film Science and Technology Research Institute of the Ministry of Culture is responsible for drafting and interpreting this standard. The main drafter of this standard is He Anfu.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
16mm negative photographic
sound record on t6mm motion -picture film-Positions and dimensions
This standard applies to the sound recording of 16mm motion -picture optical sound negative film. UDC778.534.45
GB4643--8.4
This standard adopts the international standard 1S071-1977 "Movie-16mm negative optical sound recording sound on 16mm, 35/16mm and 35/32mm film positions and dimensions". This standard specifies the sound recording positions and dimensions of 16mm motion -picture optical sound negative film. 1 Grain mask on the emulsion side
The emulsion side of the film faces the observer.
2 Dimensions
The dimensions are shown in the following figure and table.
B" type film
Running direction
Reference edge
" type film
Running direction
Note: ① The reference edge of the film faces the observer, which is called "A" type film. ② The reference edge of the film is away from the observer, which is called "B" type film. SizeWww.bzxZ.net
Published by the National Bureau of Standards on August 14, 1984
11.48 ± 0.03
15.97 ± 0.03
Implemented on May 1, 1985
Additional notes:
GB4643 B4
This standard was proposed by the Ministry of Culture of the People's Republic of China and is under the jurisdiction of the China Film Science and Technology Research Institute of the Ministry of Culture. The China Film Science and Technology Research Institute of the Ministry of Culture is responsible for drafting and interpreting this standard. The main drafter of this standard is He Anfu.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
- Recommended standards
- GB/T 3452.3-1988 液压气动用O形橡胶密封圈 沟槽尺寸和设计计算
- SY/T 0085-1994 Test method for natural weather exposure of pipeline anticorrosion coating
- SY/T 5388-2000 Classification method of carbonate reservoirs
- JB/T 5067-1999 Sherardizing of iron and steel articles
- JB/T 8099-1999 Rotor type heavy oil pump for oil field
- JB/T 7055-1993 Types, main dimensions and basic parameters of booster tanks for mechanical seal systems
- JB/T 3185.1-1999 Technical requirements for small and medium-sized three-roller plate rolling machines
- GB/T 15508-1995 Acoustics-Speech articulation testing method
- GB/T 5832.1-2003 Determination of humidity in gases Part 1: Electrolytic method
- GB 17647-1998 Safety requirements for industrial dry cleaning machines
- SY 5502-1992 Method for calculating standard labor volume for seismic exploration
- QB/T 2613.10-2005 Explosion-proof tools Explosion-proof pipe pliers
- JB/T 3340-1999 Basic parameters of forklift trucks
- GB/T 21793-2008 Chemicals - Test method of in vitro mammalian cell gene mutation
- SY/T 6537-2002 Gas and solution analysis methods for natural gas purification plants
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail:wymp4wang@gmail.com