GB/T 4684-1994 External cylindrical grinding machine parameters

This standard specifies the parameters of mobile table and mobile grinding wheel frame external cylindrical grinding machines. This standard is applicable to newly designed mobile table and mobile grinding wheel frame external cylindrical grinding machines. GB/T 4684-1994 External cylindrical grinding machine parameters GB/T4684-1994 Standard download decompression password: www.bzxz.net

UL 621.924.55
National Standard of the People's Republic of China
GB/T 1684 - 94
External cylindrical grinding machines
External cylindrical grinding machines Paranielers1994-12-20 Issued
1995·09-01 ImplementationbZxz.net
National Technical Standard
National Standard of the People's Republic of China
External cylindrical grinding machines
External cylindrical grinding machines: Puramiers1 Subject content and scope of application
This standard defines the outer limit of the movable point of the workbench and the end point of the sand test frame. This standard is used for the design of new mobile workbench and mobile wheel frame external grinding machine 2. (B1443 tool handle size G8/T46B4-94 3.1 The model of mobile workbench type foreign grinding machine is shown in 1. The parameters of the machine tool shall comply with the regulations in Table 1. The parameters of the machine tool shall comply with the regulations in Table 1. The working table is movable external grinding machine according to the National Standard Registration Bureau 1994-1T2-20 batch oil 1995·09.1 implementation GBI3: Light Yali Mihu network difference number FH/T 468494
1 Working combination external grinding machine parameters table
32 The type of ball light intelligent mobile grinding machine is shown in Figure 2. The multi-function of the machine tool is in accordance with the provisions of Table 2. 2
Maximum diameter
Maximum length F
G51443
GH/T 4684-54
Figure 2 Grinding wheel frame mobile grinding machine
Table 2 Grinding wheel frame mobile external grinding machine parameters G
Set period Beijing
Additional Notes:
GB/T46B4--94
This standard is only revised by the Ministry of Machinery Industry of the People's Republic of China. This standard is produced by the Beijing Machine Tool Research Institute of the Ministry of Machinery Industry. This standard was produced by Shanghai Machine Tool Factory and was first issued in 1084.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.