JB/T 6474-1992 Small and medium-sized axial-flow Francis turbine product series

This standard specifies the device type, size series and application scope of small and medium-sized axial flow and Francis turbine product series. This standard is applicable to axial flow and Francis turbines with a single unit capacity of 10MW and below. JB/T 6474-1992 Small and medium-sized axial flow and Francis turbine product series spectrum JB/T6474-1992 Standard download decompression password: www.bzxz.net

Mechanical Industry Standard of the People's Republic of China
JB/T6474-1992
Product Series of Small and Medium Axial Flow Francis Turbines Published on August 6, 1992
Implementation by the Ministry of Machinery and Electronics Industry of the People's Republic of China on January 1, 1993
Mechanical Industry Standard of the People's Republic of China
Product Series of Small and Medium Axial Flow Francis Turbines 1 Subject Content and Scope of Application
JB/T6474-1992
This standard specifies the device type, size series and scope of use of small and medium axial flow and Francis turbine product series. This standard is applicable to axial flow and Francis turbines with a single unit capacity of 10MW and below. This standard is used for preliminary selection of product design. Reference standards
JB6310 Series of small and medium-sized axial-flow and mixed-flow turbine runnersZBK55002 Method for compiling turbine models
3 Series of turbine products
3.1 Product series
For the product series of small and medium-sized axial-flow and mixed-flow turbines, please refer to the "Table of product series of small and medium-sized axial-flow and mixed-flow turbines". 3.2 Device type
For the device type of axial-flow and mixed-flow turbines, please refer to Figure 1. 3.3 Size series
The diameter size series of small and medium-sized axial-flow and mixed-flow turbine runners is specified as: 25, 30, 35, 42 (40), 50, 60, 71, 8480), 100, 120, 140, 160, 180, 200, 225, 250, 275, 300, 330cm. 3.4 Scope of use
The scope of use of the small and medium-sized axial flow and mixed flow turbine product series is shown in Figure 2. The scope of use of each series of turbines is shown in Figures 3 to 20. 4 Turbine product model representation
The turbine product model consists of three parts. The first part is the turbine runner model, the second part is the turbine device type, and the third part is the turbine runner diameter size (cm). The three parts are connected by a connection symbol "_\". For example: HL220/A153-WJ-84, ZZ560-LH-250 Ministry of Machinery and Electronics Industry 19 Approved on August 6, 1992, implemented on January 1, 1993
Runner model
ZZ560a
ZZ450/D32B
Runner model
Water head range
JB/T6474-1992
Small and medium-sized axial flow turbinesProduct series and variety tableAxial flow runner diameter size series, cm
330300275 250225200 140LH LH LH LH LH LH LH LH
LH LH LH LH LH LH LH LH LH
LH IH LH LH LH LH LH IH LH
LH LH LH LH LH LH LH LH LH
LH LH LH LH LH LH LH LH LH
LH LH LH LH IH LH
LH LH LH LH
Small and medium-sized Francis turbine product series engraved variety table head range
HL.260/A244
HL240/D74
HI.240/D41
HI.220/A153
HI180/A194www.bzxz.net
HL180/D06A
HL160/D46
HL90/D54
30~105
50~125
110~150
130~200
120~ 250
30~190
150~400
Francis runner diameter size series+cm
200180160140120100
Number of series
Series
JB/T6474-1992
Figure 1 Axial flow and Francis turbine device type 4
JB/T6474-1992
JB/T6474-1992
H≤hs-V/900
V-turbine installation altitude (m)
Figure 3 Application range of ZD760 series turbine Figure 5
2H(m）
JB/T6474-1992
国国国国
22H(m)
H,≤hs—V/900
V- Turbine installation altitude (m)
Figure 4 Application range of ZD560 series turbine Figure N(w)
JB/T6474-1992
Figure 5 Application range of ZZ600 series turbine Figure 214
H,shs~V/900
√- Turbine installation altitude ( m）
JB/T6474-1992
H(m)）
6ZZ560a series turbine application range diagram
HghgV/900
15H(m)
V-turbine installation altitude (m）
JB/T6474-1992
22H(m）
Figure 7ZZ560 series turbine application range diagram20
22H(m）
Hhg-V/900
√-turbine installation altitude (m)
JB/T 6474—1992
30H(m)
Figure 8ZZ500 series turbine application range 300
H,≤hs—V/900
30H（m）
√一Turbine installation altitude（m）
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.