HG/T 2913-1997 Sizes of loose-leaf films for artistic photography

HG/T 2913-1997 Artistic Photography Loose Film Dimensions HG/T2913-1997 Standard Download Decompression Password: www.bzxz.net

ICS37.040. 20
Registration No. 417—1997
Chemical Industry Standard of the People's Republic of China
HG /T 2913—1997
idt Iso 1012:1991bZxz.net
Photography Film dimensions Pictorial sheets1997-05-23 Issued
Ministry of Chemical Industry of the People's Republic of China
1997-10-01 Implementation
HG/T2913—1997
This standard still adopts ISO1012:1991 "Photography Film dimensions Pictorial sheets"
From the date of publication of this standard, 4.2 in QB/T1728—93 will be abolished. Appendices A and B of this standard are informative appendices. This standard was proposed by the Technical Supervision Department of the Ministry of Chemical Industry. -Loose-leaf film for artistic photography".
This standard is under the jurisdiction of China Lucky Film Company, the technical unit responsible for photosensitive material standardization of the Ministry of Chemical Industry. This standard was drafted by China Lucky Film Company, Shanghai Photosensitive Material Company, Alme Photosensitive Chemical Company, and Gongyuan Photosensitive Material Industry Corporation.
The main drafters of this standard are Wu Xiankai, Fang Jianguo, Xie Qingyao, and Huang Linwei. HG/T2913—1997
ISO (International Organization for Standardization) is a worldwide federation of national standard groups (ISO member groups). The work of formulating international standards is usually completed through ISO technical committees. Each member group interested in the subject for which a technical committee has been established has the right to participate in the technical committee. Governmental and non-governmental international organizations can also participate in the work after contacting ISO. ISO works closely with the International Electrotechnical Commission (IEO) on all matters of electrotechnical standardization. Draft international standards confirmed by the technical committee are circulated to the member groups for voting. At least 75% of the members who voted must approve them before they can be published as international standards.
International Standard ISO 1012 was prepared by ISO/TC42 Technical Committee Photography. Appendices A and B of this International Standard are indicative appendices. 1 Scope
Chemical Industry Standard of the People's Republic of China
Artistic Photography Film dimcnsions-Pictorial shects HG/T 2913—1997
idt ISD 1012: 1991
This standard specifies the nominal and target sizes of black-and-white and color (negative-positive or reverse processing) laser-cut films used in artistic photography and their cutting deviations.
This standard also specifies the methods for testing the verticality and edge straightness of loose-leaf films and determines the requirements for packaging marks. Artistic photography (PICTORLAL) means amateur, advertising and portrait photography, excluding films for special purposes, such as document reproduction, phototypesetting and printing plate photography. This standard uses metric units.
2 Referenced standards
The provisions contained in the following standards constitute the provisions of this standard through reference in this standard. At the time of publication, the versions shown are valid. All standards are subject to revision. Parties using this standard should investigate the possibility of using the latest versions of the following standards: ISO 1:1975 Standard reference temperature for industrial measuring disks ISQ 554:1976 Standard atmospheres for conditioning and/or testing - Specifications 3 Conditions for dimensional measurement
The dimensions and deviations specified in this standard apply to film manufacturing under the atmospheric conditions specified in ISO 554 l) (see Appendix A), temperature (23 ± 2), relative humidity (50 ± 5)%. 4 Dimensions
4.1 Recommended dimensions
The nominal and self-standard dimensions of the recommended dimensions shall comply with Table 1.1) All measuring instruments shall be calibrated at a temperature of 20 °C (as specified in ISO 1) and a relative humidity of 50%. Approved by the Ministry of Chemical Industry of the People's Republic of China on May 23, 1997 and implemented on October 1, 1997
9 × 12
13×18
24 × 30
30×40
HG/T2913—1997
Table 1 Recommended sizes of loose-leaf films
Cutting sizes and deviation rules in metric units 4.2
86. $×118. 5
128.0x178.0
178.0×238.0
238. 0 ×298. 0
298.0×398.0
The cutting and deviation rules for leaf film listed in Table 1 according to the new metric unit are shown in Table 2. Table 2 Cutting size and deviation rules for leaf film in metric units
Value (N)
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.