JB/T 3411.100-1999 Dimensions of aligning rods

JB/T 3411.100-1999 JB/T 3411.100-1999 Find the size of the rod JB/T3411.100-1999 Standard download decompression password: www.bzxz.net

ICS25.080.01
Standard of the Machinery Industry of the People's Republic of China
JB/T3411.100-1999www.bzxz.net
Aligning rod dimensions
Aligning rod Dimensions
Published on 1999-05-20
National Bureau of Machinery Industry
Implemented on 2000-01-01
Standard of the Machinery Industry of the People's Republic of China
Aligning rod dimensions
Aligning mod Dimensions
This standard specifies the type and dimensions of the alignment rod. 2 Referenced standards
JB/T3411.100—1999
Replaces JB351183
The provisions contained in the following standards constitute the provisions of this standard through reference in this standard. When this standard was published, the versions shown were all valid. All standards are subject to revision. Parties using this standard should explore the possibility of using the latest version of the following standards. GB/T1443—1996 Self-clamping cones for machine tools and tool handles 3 Types and dimensions
Types and dimensions are as specified in the following figures and tables.
Cone number
Note: The dimensions and deviations of Morse cones and metric cones are as specified in GB/T1443. 4 Marking
Marking example:
Mohs cone No. 5, d=32mm alignment bar: Alignment bar 5-32JB/T3411.100—1999Approved by the State Machinery Industry Bureau on 1999-05-2032
Implemented on 2000-01-01
Republic of China
Mechanical Industry Standard
Alignment bar size
JB/T3411.100-1999
Mechanical Industry Published and distributed by the Machinery Standardization Research Institute of the Ministry of Machinery Industry Printed by the Machinery Standardization Research Institute of the Ministry of Machinery Industry (No. 2 Shouti South Road, Beijing: Postal Code 100044)*
Format 880×1230
X number of characters xXX,XXX
Printed sheets X/X
Xth printing in XX month of 19XX
Xth edition in XX month of 19XX
Number of prints 1-XXX
Price XXXXX Yuan
XX-XXX
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.