
Technical data of Type DW-211 electronic glass
time:
2024-07-14 14:50:00
- SJ/T 10586.2-1994
- Abolished
Standard ID:
SJ/T 10586.2-1994
Standard Name:
Technical data of Type DW-211 electronic glass
Chinese Name:
DW-211型电子玻璃技术数据
Standard category:
Electronic Industry Standard (SJ)
-
Date of Release:
1994-08-08 -
Date of Implementation:
1994-12-01 -
Date of Expiration:
2008-01-20
China Standard Classification Number:
General>>Standardization Management and General Provisions>>A01 Technical Management
alternative situation:
SJ 668-1983

Skip to download
Summary:
SJ/T 10586.2-1994 DW-211 electronic glass technical data SJ/T10586.2-1994 standard download decompression password: www.bzxz.net

Some standard content:
Electronic industry standard of the People's Republic of China
SJ/T10586~105S294
Electronic glass technical data
Electronic glass technical data1994-08-08Published
1994-12-01Implementation
The Ministry of Electronics Industry of the People's Republic of China published the electronic industry standard of the People's Republic of China
Technical data of type DW-211 electronic glass
Trebnieul duta ot type Dw-211 relectronic glass subject content and applicable scope
This standard specifies the chemical properties and chemical performance indicators of DW.211 type electronic glass. This standard is applicable to glass materials used in high-power electronic devices. 2 Reference standards
GB9030 Standard method for chemical analysis of electrical glass GB9622 Test method for specific properties of electronic glass 3 Technical requirements
Chemical composition is shown in Table 1.
Beijing group
Weight ratio
74.8±1.0
5:0. 15t*
Note: 1! FU, as a case quality control example, regardless of the percentage of people, the physical and chemical performance indicators see the installation 2.
The Ministry of Electronics Industry of the People's Republic of China approved SJ/T T0586. 2-94 on August 8, 1994
Delegated S66B-B3
Test method
GH 9000.2
GB 9000,12
GB 9000. 3
GB 000.10
GB 9000.:4
1994-12-01 implementation
Standard name
SJ/T10586.2-S4
Average thermal conductivity coefficient within 0~3M range
Softening point
Annealing point
Strain point
Frequency H2 limit 20 hours of disk loss before positive average value g20 This right group is 10M0·hour report-)
Heat performance qualitative
Water resistance and chemical stability classification
Additional instructions
This standard is printed by the Institute of Standardization and Chemical Engineering of the Ministry of Electronics Industry:
(40. 5±1. 0)×10~
525110
450±:10
This standard was drafted by the Standardization Research Institute of the Ministry of Industry and the Ministry of Industry. The main drafters of this standard are Zhu Yongtang, Wen Chengjun, and Jing Guangyun. This standard was first issued in 193 and revised for the first time in August 1494. Dong Zhuifang reportedbzxz.net
CB 9522, 1
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
SJ/T10586~105S294
Electronic glass technical data
Electronic glass technical data1994-08-08Published
1994-12-01Implementation
The Ministry of Electronics Industry of the People's Republic of China published the electronic industry standard of the People's Republic of China
Technical data of type DW-211 electronic glass
Trebnieul duta ot type Dw-211 relectronic glass subject content and applicable scope
This standard specifies the chemical properties and chemical performance indicators of DW.211 type electronic glass. This standard is applicable to glass materials used in high-power electronic devices. 2 Reference standards
GB9030 Standard method for chemical analysis of electrical glass GB9622 Test method for specific properties of electronic glass 3 Technical requirements
Chemical composition is shown in Table 1.
Beijing group
Weight ratio
74.8±1.0
5:0. 15t*
Note: 1! FU, as a case quality control example, regardless of the percentage of people, the physical and chemical performance indicators see the installation 2.
The Ministry of Electronics Industry of the People's Republic of China approved SJ/T T0586. 2-94 on August 8, 1994
Delegated S66B-B3
Test method
GH 9000.2
GB 9000,12
GB 9000. 3
GB 000.10
GB 9000.:4
1994-12-01 implementation
Standard name
SJ/T10586.2-S4
Average thermal conductivity coefficient within 0~3M range
Softening point
Annealing point
Strain point
Frequency H2 limit 20 hours of disk loss before positive average value g20 This right group is 10M0·hour report-)
Heat performance qualitative
Water resistance and chemical stability classification
Additional instructions
This standard is printed by the Institute of Standardization and Chemical Engineering of the Ministry of Electronics Industry:
(40. 5±1. 0)×10~
525110
450±:10
This standard was drafted by the Standardization Research Institute of the Ministry of Industry and the Ministry of Industry. The main drafters of this standard are Zhu Yongtang, Wen Chengjun, and Jing Guangyun. This standard was first issued in 193 and revised for the first time in August 1494. Dong Zhuifang reportedbzxz.net
CB 9522, 1
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
- Recommended standards
- SY/T 5046.4-2002 Seismic geophones Part 4: Moving coil accelerometers
- GB/T 5216-2004 Guaranteed hardenability structural steel
- JB/T 2657.2-1999 Technical requirements for BD and BS series non-contact synchro machines
- QB/T 1583-2005 Leather gloves sizes
- SY/T 0077-1993 Design specification for natural gas condensate recovery
- GB/T 39319-2020 Coding rules of identification for electronic commerce entity
- GB 2494-2003 Safety rules for common abrasive tools
- GB/T 4169.5-1984 Plastic injection mold parts with shoulder guides
- GB/T 19770-2005 Cinematography-Viewing conditions for the evaluation of films and slides for television-Colours,luminancesand dimensions
- HG/T 3659-1999 Chloroprene adhesive for quick bonding conveyor belts
- GB/T 5359.6-1996 Terminology of motorcycles and mopeds - Mass of tricycles
- GB/T 9120.1-2000 Raised face welded ring plate loose sleeve steel pipe flange
- GB/T 14949.7-1994 Chemical analysis methods for manganese ores - Determination of sodium and potassium content
- JB/T 9908.4-1999 Technical requirements for horizontal spindle and rotary table surface grinders
- JB/T 6001-1992 Performance test method for air conditioning system in the cab of agricultural and forestry tractors
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail:bzxznet@163.com