GB/T 4022-1983 Horizontal spindle and rectangular table surface grinding machine accuracy

This standard applies to horizontal spindle and rectangular table surface grinders with a worktable width of 125 to 800 mm and normal accuracy. GB/T 4022-1983 Horizontal spindle and rectangular table surface grinder accuracy GB/T4022-1983 Standard download decompression password: www.bzxz.net

National Standard of the People's Republic of China
Surface grinding machines with horizontal grinding wheel spindle and recipnocating table-Testing of the accuracy This standard applies to horizontal grinding machines with horizontal grinding wheel spindle and recipnocating table with working table width of 125 to 800 mm and ordinary accuracy. This standard is formulated with reference to ISO1986-1974 "Horizontal half-surface grinding machines with recipnocating table-Accuracy". UDC 621.925
.4-187
GB 4022-83
The order of accuracy inspection items listed in this standard does not represent the actual inspection order. In order to facilitate the installation and disassembly of inspection tools and inspection, the inspection can be carried out in any order.
For simplicity, the schematic diagrams in the two chapters of pre-adjustment inspection and geometric accuracy inspection in this standard are attached with a form of machine tool schematic diagram. 1—General requirements
1.1 When using this standard, refer to JB2670-82 "General Rules for Precision Inspection of Metal Cutting Machine Tools", especially the installation before inspection, idling temperature rise of the spindle and other moving parts, inspection methods and the accuracy of the inspection process. 1.21 When performing precision inspection, the test piece should be inspected after fine grinding. 1.3 When the measured length is different from the length specified in this standard, the tolerance should be converted according to the length that can be measured in accordance with the provisions of Item 2.3.1.1 of JB2670. When the conversion result is less than 0.001mm, it is still calculated as 0.001mm. 1.4 Before inspecting the accuracy of the machine tool, the machine tool must be leveled according to the method specified by the manufacturer. 1.5 According to the agreement between the user and the manufacturer, the inspection items can be increased or decreased. Issued by the National Bureau of Standards 198312-15
Implementation on 1984-10-01
22'2'1'2'9i'2'8'2's
2'*'t'+'s
2'7''1'3'9
1'3'3'1''*'2'8
000T/000001/020
*0200%4
GB 4022-83
I'7'z'z'f'9
838'g2219
F''+'s's
1'2'z'2' 'g1'7'2'f'
008/F0*0
800*0K
-os0'0
Write snail (water
Jinghao Lake
4022-- 83
7'f'z't'g'gi'z'1's*s
17*'9'5
*2'19'*z'1'9*9
There is still a long way to go
GB 4022-83
3w2'1'g'st2sg
*0085100
GB4022-88
“1000
g00\0%
“ChinaWww.bzxZ.net
GB4022-83
GB 4022-83
This standard was proposed by the Ministry of Machinery Industry of the People's Republic of China and is under the jurisdiction of Hangzhou Surface Grinding Machine Research Institute. From the date of implementation, the Ministry's standard 1585 "Axis Surface Grinding Machine Accuracy" shall be used as the standard.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.