GB 3107.6-1991 Marine sound grenade signal

GB 3107.6-1991 Marine Acoustic Grenade Signal GB3107.6-1991 Standard Download Decompression Password: www.bzxz.net

National Standard of the People's Republic of China
Explosive shell signal for ships
Explosive shell signal for ships1 Subject content and scope of application
GB 3107.6-91
Replaces GB3107.6-82
This standard specifies the type, basic parameters, technical requirements, test methods and inspection rules of sound grenade signals for ships. This standard applies to sound grenade signals used for rescue or warning of ships in distress. It meets the International Regulations for Preventing Collisions at Sea, 1972.
2 Reference standards
GB3107.1 General technical conditions for pyrotechnic signals for ships3 Product classification
3.1 Type and sizebZxz.net
3.1.1 Sound grenade signals for ships are pyrotechnic signals that are thrown, pulled or fired. Its main components include: a.
Signal charge;
Ignition device;
Shell;
Connector;
Safety cover.
3.1.2 The outer diameter of the marine sonic grenade signal shall not exceed 40mm, the total length shall not exceed 100mm, and the total mass shall not exceed 150g. 3.2 Marking example
The marking of the sonic grenade signal (SXD) with an audible distance of 2nmile in the throwing space is: SXD2 GB 3107.6—91
4 Technical requirements
4.1 The manufacture of marine sonic grenade signals must comply with the technical requirements of Chapter 4 of GB3107.1. 4.2 The audible distance of the spatial explosion sound of this product shall not be less than 2n mile. 4.3 The charge is made of stable gunpowder. 4.4 The duration from pulling to detonation is 2.4~~2.8s. The operator and any nearby personnel will not be harmed during the whole process of ignition, throwing and explosion.
4.5 The signal housing shall be made of non-metallic materials that do not hurt people. 4.6 The connecting parts shall be made of plastic or equivalent materials. 4.7 The safety cover shall be made of metal or plastic. The safety cover made of metal shall be treated with surface anti-corrosion and anti-rust treatment. 4.8 The performance of this product shall not be affected after being immersed in water at a depth of 10cm for 5 minutes in the ready-to-fire state. 4.9 After free falling from a height of 2m according to the specified test method, this product is still in a safe state and works effectively. Approved by the State Administration of Technical Supervision on May 22, 1991 and implemented on March 1, 1992
GB 3107. 6 --- 91
4.10 This signal shall work effectively after repeating 10 cycles at an ambient temperature of 30~+65℃. 4.11 It should be able to withstand low temperature of 30℃ and high temperature of +65℃ respectively, and work effectively under this ambient temperature. 4.12 It can work effectively under any sea conditions of high temperature of +65℃ and relative humidity of 90%. 4.13 This product should be able to withstand the salt spray test of 20% NaCI solution. 4.14 This product should work effectively after being immersed in water horizontally for 1m for 24h. 5 Test method
The test method of this product shall comply with the provisions of Chapter 5 of GB3107.1. 6 Inspection rules
6.1 The inspection rules of this product shall comply with the provisions of Chapter 6 of GB3107.1. 6.2 The items, technical requirements and sampling quantity of this product for export inspection shall be in accordance with the requirements in the table below. Serial number
Inspection items
Appearance, marking and packaging
Waterproof performance and application
Technical requirements
Article 6.1 and Chapter 7
Article 4.2, 4.4+4.8 and 414
Inspection quantity
Not less than 3% per batch, but not less than 10 pieces
Not less than pieces per batch
6.3 If one item of appearance and assembly quality of this product is unqualified, it will be re-inspected with double times. If one item is still unqualified after the re-inspection, the whole batch will be returned for repair and re-inspection.
If one item of performance of this product is unqualified, it will be re-tested with double times. If one item is still unqualified after the re-inspection, the whole batch will be scrapped. 6.5 If this product has not obtained the product approval certificate, each batch is 240 pieces. After obtaining the product approval certificate, each batch is 480 pieces. 7 Marking, packaging, transportation and storage
The marking, packaging, transportation and storage of this product shall comply with the provisions of Chapter 7 of GB3107.1. Additional remarks:
This standard was proposed by the Ministry of Communications of the People's Republic of China. This standard is under the jurisdiction of the Education and Student Sub-Technical Committee of the National Technical Committee for Standardization of Marine Vessels. This standard was drafted by the Standardization and Metrology Institute of the Ministry of Communications and Nanjiang Machinery Factory. The main drafters of this standard are Liu Huiru, Ning Guizhen, Li Linfeng, Li Jushun and Deng Senru. This standard was first issued in 1982 and revised in September 1990. 528
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.