GB 18241.1-2001 Rubber linings Part 1: Equipment anti-corrosion linings

This standard specifies the definition, classification, marking, specifications, dimensions, technical requirements, test methods, acceptance rules, marking, packaging, transportation and storage of rubber anti-corrosion linings. This standard is applicable to anti-corrosion linings attached to lined equipment and textile equipment subject to medium corrosion. GB 18241.1-2001 Rubber linings Part 1 Equipment anti-corrosion linings GB18241.1-2001 Standard download decompression password: www.bzxz.net

GB18241.1—2001
This standard is published in three parts under the title of "Rubber Lining": Part 1: Equipment Anticorrosion Lining;
- Part 2: Mill Lining;
- Part 3: Flotation Machine Lining.
This part is Part 1.
Chapter 5, Chapter 6 (except for the HR rubber sheet tensile strength index in Table 4 of 6.2 which is recommended) and Chapter 9 of this standard are mandatory, and the rest are recommended.
This standard is formulated based on the physical, medium resistance and construction level of domestic rubber anticorrosion lining materials. Appendix A, Appendix B and Appendix C of this standard are the appendices of the standard. This standard is proposed by the State Bureau of Petroleum and Chemical Industry. This standard is under the jurisdiction of the Rubber Miscellaneous Products Branch of the National Rubber Standardization Committee. This standard was drafted by Beijing Rubber Products Design Institute, and the Institute of Anticorrosion and Waterproof Materials Technology of Beijing Rubber Products Design Institute, Wuhan KCH Anticorrosion Engineering Co., Ltd., Sino-Japanese Joint Venture Jingjiang Prince Anticorrosion Engineering Co., Ltd., Xianning Huaning Rubber Anticorrosion Equipment Co., Ltd., Wuxi Boiler Factory, Shenyang Fourth Rubber Factory, Shanghai Rubber Products Factory No. 4, and Hangzhou Qifu Shunhao Anticorrosion Engineering Co., Ltd. participated in the drafting.
Main drafters of this standard: Gao Qian, Wu Xiaoxing, Zhao Jixiang, Guo Jie, Wu Jijun, Ao Houfa, Yao Meichu, Zhang Pu, Zhang Qinghu From the date of implementation of this standard, the industry standards HG/T2698--1995 "Rubber Sheet for Equipment Anticorrosion Lining", HG/T2451-1993 "Rubber Lining for Equipment Anticorrosion", and HG/T2180-1991 "Natural Vulcanized Rubber Sheet for Phosphoric Acid Storage Tank Lining" will be abolished at the same time. 179
1 Scope
National Standard of the People's Republic of China
Rubber lining
Part 1 Anticorrosion lining for equipment
Rubber liningbzxZ.net
Part 1 Anticorrosion lining for equipmentGB 18241. 1--2001
TrKAoNiKAca
This standard specifies the definition, classification, marking, specifications and dimensions, technical requirements, test methods, acceptance rules, as well as marking, packaging, transportation and storage of rubber anticorrosion lining (hereinafter referred to as lining). This standard applies to anticorrosion linings that are attached to lined equipment to prevent the equipment from being corroded by media. 2 Referenced standards
The provisions contained in the following standards constitute the provisions of this standard through reference in this standard. When this standard is published, the versions shown are valid. All standards will be revised, and parties using this standard should explore the possibility of using the latest versions of the following standards. GB/T528-1998 Determination of tensile stress-strain properties of vulcanized rubber or thermoplastic rubber (eqvISO37:1994) GB/T531-1999 Rubber pocket hardness test method for indentation hardness (idtISO7619:1986) GB/T1690-1992 Test method for liquid resistance of vulcanized rubber (neqISO1817:1985) GB/T1696-1981 (1989) Determination method for transverse breaking strength of hard rubber (idtISO2473:1972) GB/T1697- 1982 (1989) Test method for impact strength of hard rubber GB/T1701--1982 1989) Determination of tensile strength and elongation at break of hard rubber GB/T7760-1987 Determination of adhesion between vulcanized rubber and metal Single plate method (eqvISO813:1974) GB/T11211-1989 Determination of adhesion strength between vulcanized rubber and metal Tensile method (eqvISO814:1986) HGJ32-1990 Rubber lining chemical equipment
3 Definitions
This standard adopts the following definitions.
3.1 Heated vulcanized rubber lining
The unvulcanized lining is pasted on the lined equipment with a rubber sheet with an adhesive, and the lining is vulcanized by heating (high-pressure steam, normal-pressure steam, hot water, hot air). The vulcanized rubber sheet is divided into hard rubber, semi-hard rubber and soft rubber according to its hardness. 3.2 Naturally vulcanized rubber lining
The lining is formed by attaching the unvulcanized lining to the lined equipment with a rubber sheet using an adhesive and completing the vulcanization process at room temperature. 3.3 Prevulcanized rubber lining
The lining is formed by attaching the prevulcanized lining to the lined equipment with a rubber sheet using an adhesive. 4 Classification
4.1 Linings are classified by vulcanization method as shown in Table 1. Approved by the General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China on July 13, 2001 180
Implemented on February 1, 2002
The classification of rubber types for linings is shown in Table 2.
Rubber type name
Rubber type abbreviation
5 Product marking
5.1 Marking code
GB 18241. 1—2001
Heat-vulcanized lining (H)
Semi-hard rubber
Chloroprene rubber
Butyl rubber
5.1.1 The temperature resistance level of the lining is divided into four levels, which are indicated by the following marks: Temperature resistance range: T≤55℃, indicated by 1. 55℃
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.