JB/T 10329.2-2002 Electric fusion external machining machine tools Part 2:

This part specifies the parameters of electric fusion external cylindrical machining machine tools. JB/T 10329.2-2002 Electric fusion external cylindrical machining machine tools Part 2: JB/T10329.2-2002 Standard download decompression password: www.bzxz.net

IC$25.0B0.99
Machinery Industry Standard of the People's Republic of China
JB/T10329.2—2002
Electric melting and explosion external cylindrical machining machine tools
Part 2: Parameters
Exlernal cylindrical electrical melting and explosion machinesPart 2ParameterswwW.bzxz.Net
2002-07-16Promulgated
2002-12-01Implementation
Before issuance by the State Economic and Trade Commission of the People's Republic of China
2 Normative reference documents
3 Parameters of electrical melting and explosion machines
"Type of ordinary electrical deep melting external cylindrical machining machine tools 2 Types of precision electrical external cylindrical machining machines ：Electric welding external cylindrical machining parameters table
JB/T10329.2—2002
.IB/r10329.2—2002
JB10329 Electric melting blasting foreign processing machine is divided into 4 parts: Part 1: Series spectrum:
Part 2: Xin number;
Part 3: Accuracy inspection
Part 4: Technical conditions.
This part is the second part of JBT10329:
This part is proposed by the China Machinery Industry Federation. This part is the National Special Machine Tool Standardization Technical Committee (SACTC161). The external units of this part: Suzhou Electric Machine Tool Research Institute, Yitong Electric Ji Explosion Co., Ltd., Xinqiang Electric Melting Bath Technology Research Institute. The main people of this part are Fu Chunsen, Ye Liangcai, Yu Zhisan, Zhou Zhong, and Sun Nuo. Model drawing
Electric fusion external cylindrical machining machine tools
Part 2: Parameters
This part defines the parameters of electric fusion external cylindrical machining machine tools. This part uses the electric fusion external cylindrical machining machine tools (hereinafter referred to as "machine tools") designed by the Institute of Mechanical Engineering. 2 Normative references
JB/10329.2—2002
The terms in the document were quoted in the part of T10329 and became the terms of this part. This is a reference document with a specified period. All subsequent amendments (excluding the contents or revisions) do not apply to this part. However, all parties involved in the research and development of this part are encouraged to use the latest technology of these documents. For any undated reference document, the latest version shall apply to this part GB/21-1950. Priority number and priority system
3 Parameters of electric fusion external machining machine tools
Types of electric fusion external machining machine tools are shown in Figures 1 and 2. The parameters of the machine tools shall comply with the provisions in Table 1. 1
Type of general electric fusion external machining machine tools 2 Type of precision electric fusion external machining machine tools J/T1 0329.2-2002
The most artificial ancient
The maximum T piece length
Scheduled work electric
Electric melting explosion processing machine tool parameter table
630·-
suk]、1009.[540、2000、s00
Method: Electric wheel () line management, seconds on the frame (melting: the line continues your value according to CD/32119800: set delivery, 126
16c0--
inch ticket needs to choose the big ten or heart + table specified in the effect of hundred hours: reduce the safety GBT2t: 1980 sound 1R[0 number system (common ratio: 25 pedal machine time
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.