QB/T 2175.9-1995 Military cymbals

This standard specifies the product classification, technical requirements, test methods, inspection rules and marking, packaging, transportation, storage, etc. of military cymbals. This standard applies to military cymbals among brass-bodied musical instruments. QB/T 2175.9-1995 Military cymbals QB/T2175.9-1995 Standard download decompression password: www.bzxz.net

Light Industry Standard of the People's Republic of China
Subject content and applicable scopebzxz.net
QB/T2175.9--1995
This standard specifies the product classification, technical requirements, test methods, inspection rules and marking, packaging, transportation, storage, etc. of military sickles. This standard applies to military inlays in brass-bodied musical instruments. Reference standards
QB/T2175.1 General technical conditions for brass-bodied musical instruments 3
Product classification
The specifications of military darts shall comply with the provisions of Table 1.
Outer diameter, mm
Basic dimensions
Technical requirements
4.1 Tone characteristics
Limit deviation
a. Heavy hit: emits a ca sound, crisp and bright, with strong explosive power and good penetrating performance. b, Light hit: The sand is audible and the vibration is uniform. 4.2 Appearance quality and other technical requirements shall comply with the provisions of QB/T2175.1. Test methods
shall comply with the provisions of QB/T2175.1.
6 Inspection rules
shall comply with the provisions of QB/T2175.1.
Approved by China Light Industry General Association on October 24, 1995
Mass, kg/pair
2. 00 ~~ 3. 00
2.20~3.20
2.40~3.40
2.60~3.60
2.80~4.00
2.80~4.80
3.60~~5.40
Implemented on June 1, 1996
Marking, packaging, transportation and storage
shall conform to the provisions of QB/T2175.1.
Additional remarks:
QB/T2175.9—1995
This standard was proposed by the Quality Standards Department of China Light Industry General Association. This standard is under the jurisdiction of the National Center for Standardization of Musical Instruments. This standard was drafted by the Percussion Instrument Branch of Beijing National Musical Instrument Factory. The main drafters of this standard are Zhang Xianling and Kang Dianshen. From the date of implementation of this standard, the professional standard ZBY58002.9-1989 "Military Inlay" issued by the former Ministry of Light Industry will be invalid.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.