JB/T 9162.32-1999 Flat contact dimensions
time:
2024-08-11 18:13:04
- JB/T 9162.32-1999
- in force
Standard ID:
JB/T 9162.32-1999
Standard Name:
Flat contact dimensions
Chinese Name:
平触头 尺寸
Standard category:
Machinery Industry Standard (JB)
-
Date of Release:
1999-05-20 -
Date of Implementation:
2000-01-01
Standard ICS number:
Mechanical Manufacturing>>Machine Tools>>25.080.01 General Machine ToolsChina Standard Classification Number:
Machinery>>Process Equipment>>J44 General Fixture
alternative situation:
ZB J44001.32-87
Description (Translated English) / downloadSkip to download
Summary:
JB/T 9162.32-1999 JB/T 9162.32-1999 Flat contact dimensions JB/T9162.32-1999 Standard download decompression password: www.bzxz.net
Standard contentSome standard content:
JCS 25.080.01
Machinery Industry Standard of the People's Republic of China
JB/T9162.1-9162.48--1999
Inspection fixture parts and components
The parts and units of inspection jig1999-05-20 Issued
State Machinery Industry Bureau
2000-01-01 Implementation
Machinery Industry Standard of the People's Republic of China
Flat contactbZxz.net
Dimensions
Flat coataet
Dimonsions
This standard specifies the types and dimensions of flat contacts. Types and dimensions
Types and dimensions shall be as specified in the following week.
Marking example:
Marking of half contact with diameter of 3mm:
Contact March/9162.32—1999
National Machinery Industry Bureau 1999-05-20 approved JBT9162.32-1999
Replaced J4101.32-87
2000-01-01 implemented
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
Machinery Industry Standard of the People's Republic of China
JB/T9162.1-9162.48--1999
Inspection fixture parts and components
The parts and units of inspection jig1999-05-20 Issued
State Machinery Industry Bureau
2000-01-01 Implementation
Machinery Industry Standard of the People's Republic of China
Flat contactbZxz.net
Dimensions
Flat coataet
Dimonsions
This standard specifies the types and dimensions of flat contacts. Types and dimensions
Types and dimensions shall be as specified in the following week.
Marking example:
Marking of half contact with diameter of 3mm:
Contact March/9162.32—1999
National Machinery Industry Bureau 1999-05-20 approved JBT9162.32-1999
Replaced J4101.32-87
2000-01-01 implemented
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
- Recommended standards
- HG/T 2069-1991 Specification for half-shaft radial force tester for rotating shaft lip seals
- JB/T 50119-1998 Reliability test method for hot chamber horizontal cold chamber die casting machine
- QB/T 1601-1992 Coil base paper
- JB/T 9075-1999 Technical requirements for non-lubricated reciprocating piston high pressure oxygen compressors
- GB/T 3238-1982 Acoustical levels and reference quantities
- QB 2658-2004 Basins for sanitary equipment
- JB/T 5164-1991 Electric fence pulser test method
- GB/T 3163-1993 Vacuum technical terms
- JB/T 9158.13-1999 Dimensions of square head screws for horizontal multi-spindle automatic lathe accessories
- QB/T 1290.2-1991 Steel hammer ball peen hammer
- GB/T 5497-1985 Grain and oilseeds - Determination of moisture content
- GB 17498-1998 General safety requirements for fitness equipment
- HG/T 2198-1991 General requirements for physical test methods for vulcanized rubber
- YB/T 172-2000 Quantitative phase analysis of silica bricks by X-ray diffraction method
- GB 15934-1996 Wire Assemblies
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail：wymp4wang@gmail.com