
GB 16201-1996 Hygienic standard for carbon dioxide in workshop air
time:
2024-08-06 06:46:26
- GB 16201-1996
- in force
Standard ID:
GB 16201-1996
Standard Name:
Hygienic standard for carbon dioxide in workshop air
Chinese Name:
车间空气中二氧化碳卫生标准
Standard category:
National Standard (GB)
-
Date of Release:
1996-04-03 -
Date of Implementation:
1996-09-01
Standard ICS number:
Environmental protection, health and safety>>Air quality>>13.040.30 Air quality in the workplaceChina Standard Classification Number:
Medicine, Health, Labor Protection>>Health>>C52 Labor Hygiene
Release date:
1996-04-03Review date:
2004-10-14Drafting Organization:
School of Public Health, West China University of Medical SciencesFocal point Organization:
Ministry of HealthPublishing Department:
State Bureau of Technical SupervisionCompetent Authority:
Ministry of Health

Skip to download
Summary:
This standard specifies the maximum permissible concentration of carbon dioxide in the air of a workplace. This standard applies to all types of enterprises that have, produce and use carbon dioxide. GB 16201-1996 Hygienic Standard for Carbon Dioxide in Workshop Air GB16201-1996 Standard download decompression password: www.bzxz.net

Some standard content:
National Standard of the People's Republic of China
Health standard for carbon dioxide in the air of workplacebzxZ.net
Health standard for carbon dioxide in the air of workplace Subject content and scope of application
This standard specifies the maximum permissible concentration of carbon dioxide in workplace air. This standard applies to all types of enterprises that have, produce and use carbon dioxide. 2 Hygiene requirements
GB16201—1996
The maximum permissible concentration of carbon dioxide in workplace air is 18000mg/m3 (10000ppm or 1%). 3 Supervision and implementation
Health administrative departments at all levels are responsible for supervising the implementation of this standard. Additional notes:
This standard was proposed by the Ministry of Health of the People's Republic of China. This standard was drafted by the School of Public Health of West China University of Medical Sciences and Bengbu Medical College. The main drafters of this standard were Wang Guoqin and Feng Baohua. This standard was interpreted by the Institute of Labor Hygiene and Occupational Diseases, Chinese Academy of Preventive Medicine, which was entrusted by the Ministry of Health. Approved by the State Administration of Technical Supervision on April 3, 1996 and implemented on September 1, 1996
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
Health standard for carbon dioxide in the air of workplacebzxZ.net
Health standard for carbon dioxide in the air of workplace Subject content and scope of application
This standard specifies the maximum permissible concentration of carbon dioxide in workplace air. This standard applies to all types of enterprises that have, produce and use carbon dioxide. 2 Hygiene requirements
GB16201—1996
The maximum permissible concentration of carbon dioxide in workplace air is 18000mg/m3 (10000ppm or 1%). 3 Supervision and implementation
Health administrative departments at all levels are responsible for supervising the implementation of this standard. Additional notes:
This standard was proposed by the Ministry of Health of the People's Republic of China. This standard was drafted by the School of Public Health of West China University of Medical Sciences and Bengbu Medical College. The main drafters of this standard were Wang Guoqin and Feng Baohua. This standard was interpreted by the Institute of Labor Hygiene and Occupational Diseases, Chinese Academy of Preventive Medicine, which was entrusted by the Ministry of Health. Approved by the State Administration of Technical Supervision on April 3, 1996 and implemented on September 1, 1996
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
- Recommended standards
- GB/T 2951.24-1994 Test methods for mechanical and physical properties of wires and cables - Test method for naphthenate copper content in outer sheath
- HG/T 2310-1992 Dodecanol
- JB/T 6520-1992 Calculation method for thrust bearings of steam turbines
- GB/T 3609.3-1983 Test method for optical properties of welding goggles
- JG/T 115-1999 Color coated steel door and window profiles
- GBZ 84-2002 Diagnostic criteria for occupational chronic n-hexane poisoning
- HG/T 2902-1997 Polytetrafluoroethylene resin for molding
- HG 2011-1991 Rubber Hot Water Bag
- SJ/T 10036-1991 Detail specification for electronic components Electronic tube of type FU-605 (Applicable for certification)
- JB/T 7050-1993 Rolling bearing cleanliness and evaluation method
- GB 2698-1987 Technical conditions and classification regulations for jute steel wire rope core yarn
- GB/T 5413.31-1997 Qualitative test for urease in infant formula and milk powder
- JB/T 9161.3-1999 Dimensions of internal grinding machine adapter rods, type A
- JB/T 5893.4-1991 Gongxian special grade alumina powder for electrical porcelain raw materials
- HG/T 2750-1996 Indigo Inspection
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail:[email protected]