JB/T 6213.4-1992 Flexible cables and cords for connecting motor windings Part 4 Flexible cables and cords with a maximum continuous operating conductor temperature of 180°C

This standard specifies the product varieties, technical requirements and inspection rules for flexible cables and cords for connecting motor windings with a maximum continuous operating conductor temperature of 180°C. This standard applies to flexible cables and cords for connecting motor windings with a maximum continuous operating conductor temperature of 180°C. In addition to meeting the requirements specified in this standard, this standard shall also meet the relevant provisions of JB 6213.1. JB/T 6213.4-1992 Flexible cables and cords for connecting motor windings Part 4 Flexible cables and cords with a maximum continuous operating conductor temperature of 180°C JB/T6213.4-1992 Standard download decompression password: www.bzxz.net

Part 4
Standard of the Machinery Industry of the People's Republic of ChinawwW.bzxz.Net
Flexible Cables and Cords for Connecting Motor Windings
Flexible Cables and Cords with Continuously Operating Conductor Maximum Temperature of 180°C
JB6213.4-92
1 Subject Content and Scope of Application
This standard specifies the product varieties, technical requirements and inspection rules for flexible cables and cords for connecting motor windings with continuous operating conductor maximum temperature of 180°C.
This standard applies to flexible cables and cords for connecting motor windings with continuous operating conductor maximum temperature of 180°C. In addition to meeting the requirements specified in this standard, the products shall also meet the relevant provisions of JB6213.1. Lead and Standard
JB6213.1 Flexible Cables and Cords for Connecting Motor Windings Part 1 3
Usage Characteristics
3.1 The rated voltage of the cable (wire) is 500, 1000V. 3.2 The maximum temperature of the continuous operating conductor of the cable (wire) is 180℃. General provisions
3.3 The allowable bending radius of the cable (wire) during laying shall not be less than 4 times the outer diameter of the cable (wire). Model
The model of the cable (wire) product is as specified in Table 1. Model
5 Specifications
Specifications are as specified in Table 2
Copper core silicone rubber insulated motor winding lead cable (wire) Table 2
Rated voltage
500,1000
5.2 The structure of the cable (wire) is as specified in Table 3. Approved by the Ministry of Machinery and Electronics Industry on June 16, 1992 Core
Nominal surface
Implementation on January 1, 1993
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.