- Location:
- Standard Download >>
- National Standard (GB) >>
- GB/T 4187-1984 Tungsten Rod
GB/T 4187-1984 Tungsten Rod
time:
2024-09-20 12:37:30
- GB/T 4187-1984
- in force
Standard ID:
GB/T 4187-1984
Standard Name:
Tungsten Rod
Chinese Name:
钨杆
Standard category:
National Standard (GB)
-
Date of Release:
1984-03-09 -
Date of Implementation:
1984-01-01
Standard ICS number:
Metallurgy>>77.080 Ferrous MetalsChina Standard Classification Number:
Metallurgy>>Nonferrous metals and their alloy products>>H63 Rare high melting point metals and their compounds
Release date:
1984-03-09Review date:
2004-10-14Drafting Organization:
Shanghai Light Bulb FactoryFocal point Organization:
Ministry of Information Industry (Electronics)Publishing Department:
Ministry of Information Industry (Electronics)Competent Authority:
Ministry of Information Industry (Electronics)
Skip to download
Summary:
GB/T 4187-1984 Tungsten Rod GB/T4187-1984 Standard Download Decompression Password: www.bzxz.net
Some standard content:
National Standard of the People's Republic of China
Tungsten rods
This standard applies to tungsten rods used in the manufacture of electric vacuum devices and electric light source parts. 1. Brand, purpose and specifications
1.1 The brand and purpose of tungsten rods shall comply with the provisions of Table 1. Table 1bZxz.net
Note: Polished rod material should be used for lead wires. 1.2
The diameter range of tungsten rods shall comply with the provisions of Table 2. Type
Polished tungsten rods
UDC669.27-422
GB 4187-84
Filament, cathode, electron tube parts and gas discharge lamp electrodes, etc. Grid side rods, lead wires, brackets, gas discharge lamp electrodes, etc. Grid side rods, brackets, lead wires and electrodes, etc. Table 2
The shortest length of tungsten rods shall comply with the provisions of Table 3. 1.3
Diameter d
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
Tungsten rods
This standard applies to tungsten rods used in the manufacture of electric vacuum devices and electric light source parts. 1. Brand, purpose and specifications
1.1 The brand and purpose of tungsten rods shall comply with the provisions of Table 1. Table 1bZxz.net
Note: Polished rod material should be used for lead wires. 1.2
The diameter range of tungsten rods shall comply with the provisions of Table 2. Type
Polished tungsten rods
UDC669.27-422
GB 4187-84
Filament, cathode, electron tube parts and gas discharge lamp electrodes, etc. Grid side rods, lead wires, brackets, gas discharge lamp electrodes, etc. Grid side rods, brackets, lead wires and electrodes, etc. Table 2
The shortest length of tungsten rods shall comply with the provisions of Table 3. 1.3
Diameter d
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
- Recommended standards
- GB/T 5170.9-1996 Basic parameter verification methods for environmental test equipment for electrical and electronic products Solar radiation test equipment
- GB/T 8893-1988 Rectangular and square copper and copper alloy waveguides
- GB/T 3727-2003 Determination of trace water in industrial ethylene and propylene
- GB/T 29186.1-2021 Brand value element evaluation Part 1: General
- JB/T 7174.2-1993 Diesel engine fuel injection pump delivery valve assembly performance test method
- GB 4867-1996 Diagnostic criteria and treatment principles for occupational acute organic fluorine poisoning
- JB/T 9208-1999 Classification and codes of controlled atmosphere
- HG 2958.9-1988 Determination of aluminum content in celestite ore EDTA volumetric method
- GB/T 5065-2004 Hot-dip lead-tin alloy carbon steel cold-rolled thin steel sheet and strip
- GB/T 14533-1993 Technical requirements for wooden bookshelves and periodical racks for library supplies
- GB 50271-1998 Code for construction and acceptance of metal cutting machine tool installation projects
- JB/T 82.4-1994 Ring connection face welding steel pipe flange
- QB/T 1593-1992 Multi-blade woodworking circular saw machine
- HG 2676-1995 4% Gibberellic Acid EC
- GB/T 2861.14-1990 Die guide bushing
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail:bzxznet@163.com