GB/T 2884.1-1996 Yangtze River Sectional Barge Model Standard Series--Yangtze River 3000-ton Sectional Barge Model Standard

This standard specifies the general requirements and model composition marks for the 3,000-ton segmented barges on the Yangtze River. This standard applies to segmented barges sailing in the Class I waterway of the Yangtze River mainstream. GB/T 2884.1-1996 Yangtze River System Segmented Barge Model Scale Series - Yangtze River 3,000-ton Segmented Barge Model Scale GB/T2884.1-1996 Standard download decompression password: www.bzxz.net

ICs 47. 060
National Standard of the People's Republic of China
Dimension series of integrated barges for the changjiang waterways
Issued on 1996-06-17
State Administration of Technical Supervision
Implemented on 1997-01-01
W.GB/T2884.1-1996
This standard is a revision of GB2884.1-81. After the revision of this standard, the original GB.2884.1-81 is abolished. The division of waterways in this standard is consistent with the requirements of GBF139--90 "Inland Waterway Standard". This standard is proposed by the Ministry of Transport of the People's Republic of China. This standard is under the jurisdiction of the National Technical Committee for Inland Waterway Standardization. The drafting units of this standard are: Standard Metrology Institute of the Ministry of Transport and Yangtze River Ship Design Institute. Drafters of this standard: Liu Huiru, Xiang Zhizhong, Wang Feifei. This standard was first issued on December 31, 1981. This standard is entrusted to the Yangtze River Ship Design Institute for interpretation. W.bzsosocom National Standard of the People's Republic of China
Yangtze River System Sectional Barge Type Dimensions Series
Yangtze River 3000-ton Sectional Barge Type Dimensions
Dimenajan series Df integrated barges for the changilang waterway?-Dlmenglons of fintegrated barges for the ChangJiang-3 O3CDWT1 Scope
This standard specifies the general requirements, model composition and markings of the new 3000-ton sectional barges for the Yangtze River. This standard is applicable to the sectional barges sailing in the first-class waterway of the Yangtze River. 2-General requirements
2.1 Ship type tonnage: 3.6000t.
2.2 Main dimensions of the ship: total length 75 m, beam 16.2 m, draft 3.4~3.8 m. 3 Model composition
Model consists of four partswwW.bzxz.Net
CG』3 000
Indicates the class of the ship
“节” is the first letter of the Chinese pinyin, indicating the section barge; “干” is the first letter of the Chinese pinyin, indicating the main stream; “长” is the first letter of the Chinese pinyin, indicating the Yangtze River; 4 signs
4.1 All barges are equipped with signs including the following contents: a) ship model, departure sequence number, mark number; b) total length, waterline length, beam, beam, designed displacement, full load displacement; ) Explanation! Name:
Construction date:
GB/T 28B4. 11995
Replaces GB 2684. 1-61
4. 2 The sign is rectangular in shape, 330 mm long and 230 mm wide, mainly made of metal (copper, copper or other materials), approved by the State Technical Supervision Bureau on June 17, 1996: implemented on January 1, 1997
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.