JB/T 8650.5-1997 Machine tool cooling system accessories ball-coupled cooling pipe

JB/T 8650.5-1997 JB/T 8650.5-1997 Machine tool cooling system accessories Ball-coupled cooling pipe JB/T8650.5-1997 Standard download decompression password: www.bzxz.net

Machinery Industry Standard of the People's Republic of China
JB/1 8650.51997
Machine tool cooling system accessories
Ball-coupled cooling pipe
Published on August 18, 1997
+Ministry of Machinery Industry of the People's Republic of China
Implementation on January 1, 1998
J0/T 8650.5-1407
This standard was proposed by the Machine Tool Standardization Technical Committee. This standard is issued by Beijing Research Institute of Machinery Industry Ministry, the originating units of this standard are: Beijing Research Institute of Machinery Industry Ministry, Zhejiang Taizhou Yunpu Electric Appliance Co., Ltd., Beijing First Machine Tool Co., Ltd., Beijing Second Machine Tool Factory
1 Scope
Machinery Industry Standard of the People's Republic of China
Machine Tool Cooling System Accessories
Ball-coupled Cooling Pipe
JH/T8650.5-1297
This standard specifies the type and basic number, marking, technical requirements, test methods and table and color matching of ball-coupled cooling pipes. Only the cooling system of machine tools with a resistance not exceeding 0.4M can be used as a reference for other cooling systems. The following provisions are included in the standard and shall become the standard text of this standard by citing it in the standard. This standard is marked as a self-validation version. All standards are subject to revision. The commonality of this standard is to reduce the possibility of using the following standard new versions. G37307-8 Non-frequency seal thread 3 Type and basic number Type and basic number See 1 and 1 The marking of the thread of the net column pipe in the code should comply with the requirements of GH7307, approved by the Ministry of Machinery Industry on August 18, 1997 [998] JB/T8650,5 Note: If the user needs other lengths outside the standard, special orders can be made. 4 Marking root limit joint outer diameter d. G3/81 nozzle diameter. 6.5r:m cooling pipe and nozzle marking example: joint G3/KBG.5JB/TR60.:-.19974.2 type
joint outer diameter G3/8, nozzle width 64m\ cooling pipe and nozzle, common marking example: ball joint zero joint G5/8-40J3/8653.-16 technical requirements
cooling pipe joint and connecting parts should be able to pass the pressure test. The above-mentioned parts and connecting parts should have low crack width. 6 test methodbzxz.net
technical requirements test:
a) for G1/4 single cooling pipe, press r.13 MPa, maintain pressure 5 zrin, should meet the requirements of the fifth life. h) For G3/RB cold belt, add 0.2 MPe for 5 min. It should meet the requirements of Chapter 5. e) For core 1/cold pipe, press 25MPe for 5min. The seat should meet the requirements of Chapter 7.
Cold belts should be packed with new materials before being packed. 7.1
7.2 Each empty carton should have a inspection card. The total content is: a) manufacturer's name, specifications, quality, and efficiency:
h) product quality:
e) production limit number:
) manufacturer's name.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.