QB/T 1150-2005 Single-layer pushpin

This standard specifies the classification and naming, requirements, test methods, inspection rules and marking, packaging, transportation and storage of single-layer pushpins. This standard applies to metal single-layer pushpins of various specifications. QB/T 1150-2005 Single-layer pushpin QB/T1150-2005 Standard download decompression password: www.bzxz.net

1CS 97.180
Classification number: Y54
Winter number: 15707: 2005
Light Industry Standard of the People's Republic of China
QB/T1150-2005
QB/311991
Single-layer pushpin
Thumb tacks
Released on 2005-03-19
National Development and Reform Commission of the People's Republic of China Implemented on 2005-09-01
This standard is a revision of Figure 3 of (B1150-1991. QB/T1150-2005
Compared with QB/1150-1991, this standard has revised the requirements of standard 4,2 for materials used. This standard is proposed by the China Federation of Industry and Commerce. This standard is under the jurisdiction of the National Safety Price Attribution Center of Yangshan: Shibiao Qunshan Industrial Information Communication City Product Co., Ltd. Ruiyi Chemical Products Co., Ltd., Lindan Cultural Products Co., Ltd., and Yihai Yuanchang Linma Product Sales Co., Ltd. Co., Ltd., Xinjiang Tianda Educational Supplies Co., Ltd., Xinjiang Xinben Office Supplies Co., Ltd., Wuyi County Guangming Stationery Co., Ltd. participated in the preparation of this standard. The person in charge is Zhang Yi. This standard was first issued in June 1991. This standard is the date of implementation of the first edition of this standard. It is issued by the Ministry of Light Industry on behalf of the original light industry. 1. Industry Standard Q1150-11 Single Commercial Nail 3 ■ Scope
Single-layer Pushpin
QB/T1150-2005
This standard specifies the classification and naming, table, test methods, inspection and measurement marking, packaging, transportation, storage of single-layer pushpins. This standard applies to various specifications of pushpins: ... 2. Normative Reference Documents ||tt| |The following documents are used in conjunction with the standard without indicating the date of use. They are called reference documents with the date of reference. All modifications (extensions or revisions) of the documents do not apply to this standard. However, the parties involved in this standard are encouraged to use the latest versions of these documents. The latest versions are applicable to this standard. GB19-2100 Inspection and marking of screening transport items
GH/12828.1-2003 Inspection plan for oil booms according to the quality improvement period QB/T3826-1999 Neutral salt spray test (NS5) method for light industrial products Q/ T3R32-1999 Light. Product enterprise total enough yuan partial test result price National Quality and Technical Supervision Bureau issued | 1 Sha 71172 Product Differential Labeling Regulations 3 Classification and naming
3.1 Product appearance
Overall.
3.2 Product appearance and dimensions
3.3 The special specifications of the product will be indicated in the agreement between the supply and demand parties. QR/T1'50·-2CCE
4 Requirements
R ball and?
1 The firmness of the pins and the rod
Let the rod and the rod be firm,
1.2 The nail tip
is not inferior, not flexible, and does not change
half a small size
1.! 1:0. 1
The nail finger should be complete, the surface mountain is not reported correctly, the point of departure, the heat 1.0m short every small 1 should exceed, 4.4zhao and the verticality filling difference
the depth is more than 5
2.5zhao width deviation
grid m (2), -D1m
4.6zhao and the eccentricity difference
the eccentricity of the seed is .mm (avoid the calculation
one center distance;
S one, large
4.! Cap diameter
Nail point diameter is 9mm~12mm, each small nail, the maximum deviation of the diameter is not 4.0 External quality
No painting, no penetration: the product is about the same, too black 4.9 Anti-rust ability
This grade
4.10 Small wear packaging number
50 small forget blue is 1, every 100 small package will allow a difference of one? 5 Test method
5.1 Nail and nail rod package firmness
1 Inspection method. Arrival and not said piece. Figure 4 Figure 4
5.2 Verticality
Slope division
5.3 Nail cap depth, center distance: Nail diameter
Evenly divided into (1.02mm micro-scale measurement. 5.4 Anti-rust ability
Pull (QH33261 center standard test, to cycle 1h.55 Small box packaging quantity
Pay small integer opening plan.
QBT1502CC5
QB,T1150-2005
5.6 Other items
6 Inspection rules
Product inspection uses batch inspection
This micro-inspection adopts piece count: the unit of detail is small box 62
Batch inspection according to (Japanese T2828.1-23 special ball inspection level 8-3 6.3 The inspection plan for the stop belt is determined by the requirements of the batch inspection. The test method is determined according to the AQI in Table 2. 6.4 The whiteness of the small ancient points is determined according to the requirements of Table 2. The anti-wear belt strength is determined according to the requirements of Table 2. The nail width appearance is only thick and the edge is only thick. The identification method is determined according to the requirements of Table 2. 6.6 In addition to the anti-rust performance, the sample unit of the sample unit is sampled at the second time. The AQ meter of each sample unit is checked according to Table 2.
6.6 Anti-chain ability rate OR/T38321999 is judged. If the drip resistance level is lower than 6 levels: the sample is not specified: the marking, packaging, transportation, storage bzxz.net
7. 1. Marking
The packaging should be marked with the manufacturer's name, factory name, trademark, production month name, trade number, specification, quantity, gross, net year, volume, standard number, mountain, import date or batch number, etc., and indicate caution and moisture-proof, etc., and the marking should comply with the relevant regulations. The unified standard marking should be in accordance with (/T19120).
7.2 Packaging
The packaging structure should be reasonable, and the special specifications of the packaging should be clearly stated in the company. Each salesperson should have a certificate of conformity. 7.3 Transportation
Products should avoid moisture and rain during movement. Be careful when moving and do not touch them to prevent the packaging from being messed up. 74 Storage
Products should be stored in an effectively ventilated room and placed on the shelf at least 30mm away from the surface. The location should be more than 100m to prevent drastic temperature changes in the warehouse. The above storage conditions are as follows: the product quality period is 1 year from the advertising date.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.