JB/T 3411.97-1999 Dimensions of end milling cutter bars for boring machines

JB/T 3411.97-1999 This standard is a revision of JB 3508-83 "Dimensions of end milling cutter bars for boring machines". Only the following points have been modified during the revision, and the main technical content has not changed: - Writing format; - Standard name plus English; - Relevant reference standards and related content; - Thread drawing method. This standard specifies the type and size of end milling cutter bars for boring machines. JB/T 3411.97-1999 Dimensions of end milling cutter bars for boring machines JB/T3411.97-1999 Standard download decompression password: www.bzxz.net

ICS25.080.01
Machinery Industry Standard of the People's Republic of China
JB/T3411.97-1999
Dimensions of end mill arbor for boring machines
Arbor of end mill for boring machines-Dimensions
Published on 1999-05-20
State Machinery Industry Bureau
Implementation on 2000-01-01
Machinery Industry Standard of the People's Republic of China
Dimensions of end mill arbor for boring machines
Arbor of end mill for boring machines Dimensions
This standard specifies the types and dimensions of end mill arbor for boring machines. 2 Reference standards
JB/T3411.97—1999
Replace JB350883wwW.bzxz.Net
The provisions contained in the following standards constitute the provisions of this standard through reference in this standard. When this standard is published, the versions shown are valid. All standards will be revised, and parties using this standard should explore the possibility of using the latest versions of the following standards GB/T1443-1996 Self-clamping cones for machine tools and tool handles 3 Types and dimensions
The types and dimensions are as specified in the following figures and tables.
Approved by the State Bureau of Machinery Industry on May 20, 1999, and implemented on January 1, 2000
Cone number
JB/T3411.97—1999
Note: The dimensions and deviations of Morse tapers and metric tapers are marked in accordance with the provisions of GB/T14434
Marking example:
Morse taper shank No. 6, end milling cutter bar for boring machines with d=40mm: bar 6-40JB/T3411.97—1999
Mechanical industry standard
Dimensions of end milling cutter bars for boring machines
J B/T3411.97-1999
Published by the Machinery Standardization Research Institute of the Ministry of Machinery Industry Printed by the Machinery Standardization Research Institute of the Ministry of Machinery Industry (No. 2 Shouti South Road, Beijing: Postal Code 100044)*
Format 880×1230
X Number of characters xXX,XXX
Sheet X/X
Xth printing in XX month of 19XX
Xth edition in XX month of 19XX
Number of prints 1-XXX
Price XXXXX Yuan
XX-XXX
66616117 /1
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.