
JB/T 7384.9-1994 Thickness caliper between slotted nuts c and bearing surface of fasteners
time:
1994-07-26 15:00:00
- JB/T 7384.9-1994
- in force
Standard ID:
JB/T 7384.9-1994
Standard Name:
Thickness caliper between slotted nuts c and bearing surface of fasteners
Chinese Name:
紧固件 开槽螺母c与支承面间的厚度卡规
Standard category:
Machinery Industry Standard (JB)
-
Date of Release:
1994-07-26 -
Date of Implementation:
1995-07-01
China Standard Classification Number:
Machinery>>General Parts>>J13 Fasteners
Drafting Organization:
Machinery Standardization Research Institute of the Ministry of Machinery IndustryFocal point Organization:
National Technical Committee for Fastener StandardizationProposing Organization:
National Technical Committee for Fastener StandardizationPublishing Department:
Ministry of Machinery Industry of the People's Republic of China

Skip to download
Summary:
This standard specifies the type and size of the thickness gauge for testing the thickness between the bottom of the slotted female groove and the supporting surface. This standard applies to item 21 in Table 2 of ZB J13 002.1. JB/T 7384.9-1994 Thickness gauge between the slotted nut c of fasteners and the supporting surface JB/T7384.9-1994 Standard download decompression password: www.bzxz.net

Some standard content:
Mechanical Industry Standard of the People's Republic of China
JB/T7384.1~7384.18-94
Special Inspection Fixtures for Fasteners
Published on 1994-07-26
Ministry of Machinery Industry of the People's Republic of China
Implemented on 1995-07-01
Mechanical Industry Standard of the People's Republic of China
Fasteners
Thickness Caliper Gauge between Slotted Nut Groove Bottom and Support Surface Subject Content and Scope of Application
This standard specifies the type and size of the thickness caliper gauge for detecting the groove bottom and support surface of the slotted nut. This standard applies to item 21 in Table 2 of ZBJ13002.1. 2 Reference standards
GB1957
Smooth limit gauges
Fastener tolerances Bolts, screws and nuts
ZBJ13002.1 Fastener test methods Dimensions and geometrical accuracy of bolts, screws, studs and nuts 3 Types and dimensions
Types and dimensions of thickness gauges between slot bottom and bearing surface of slotted nuts Figure 1 and Table 1. Table 2, Home
Approved by the Ministry of Machinery Industry on July 26, 1994
JB/T .7384.9—94
1995-07-01 implementation
Thread specification
A, B edge
A, B grade
Basic size
Limit deviation
Basic size
Limit deviation
Basic size
Limit deviation
Basic size
Limit deviation
Thread specification
A, B grade
Basic size
Limit deviation
Basic size
Limit deviation
Basic size
Limit deviation
JB/T 7384. 9-94
—0.0245
—0.0195
—0.0245
Screw specification
Grade A, B
Basic size
Limit deviation
Basic size
Limit deviation
Basic size
Limit deviation
Basic size
Limit deviation
Explosion effect specification
Grade A, B
Basic size
Limit deviation
Basic size
Limit deviation
Basic size
Limit deviation
Basic size
Limit deviation
JB/T 7384.994
Continued Table 1
0, 0195
—0.0235
— 0. 0425
Thread specification
Signature size
Limit deviation
Basic size
Limit deviation
Basic size
Limit deviation
Basic size
Limit deviation
Thread specification
A, B line
A, B grade
Basic size
Plate limit deviation
Basic size
Limit deviation
Basic size
Limit deviation
Basic size
Limit deviation
0,0275
JB/T.7384.9—94
Continued Table 1
Thread number specification
Basic size
Basic size
Thread specificationwwW.bzxz.Net
Basic size
Basic size
—0.0305
JB/T 7384.9-94
(M14X1.5)
M10×1.25
M12×1.25
(M18X1.5)
Thread specification
Basic size
Basic size
Thread specification
Basic size
Basic size
(M27X2)
JB/T 7384.9-94
Continued Table 2
M20×2
(M20×1.5)
(M22×1.5)
(M30×2)
19. 6025. 6028. 60
18.7624.7627.70
(M33×2)
M24×2
M36×3
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
JB/T7384.1~7384.18-94
Special Inspection Fixtures for Fasteners
Published on 1994-07-26
Ministry of Machinery Industry of the People's Republic of China
Implemented on 1995-07-01
Mechanical Industry Standard of the People's Republic of China
Fasteners
Thickness Caliper Gauge between Slotted Nut Groove Bottom and Support Surface Subject Content and Scope of Application
This standard specifies the type and size of the thickness caliper gauge for detecting the groove bottom and support surface of the slotted nut. This standard applies to item 21 in Table 2 of ZBJ13002.1. 2 Reference standards
GB1957
Smooth limit gauges
Fastener tolerances Bolts, screws and nuts
ZBJ13002.1 Fastener test methods Dimensions and geometrical accuracy of bolts, screws, studs and nuts 3 Types and dimensions
Types and dimensions of thickness gauges between slot bottom and bearing surface of slotted nuts Figure 1 and Table 1. Table 2, Home
Approved by the Ministry of Machinery Industry on July 26, 1994
JB/T .7384.9—94
1995-07-01 implementation
Thread specification
A, B edge
A, B grade
Basic size
Limit deviation
Basic size
Limit deviation
Basic size
Limit deviation
Basic size
Limit deviation
Thread specification
A, B grade
Basic size
Limit deviation
Basic size
Limit deviation
Basic size
Limit deviation
JB/T 7384. 9-94
—0.0245
—0.0195
—0.0245
Screw specification
Grade A, B
Basic size
Limit deviation
Basic size
Limit deviation
Basic size
Limit deviation
Basic size
Limit deviation
Explosion effect specification
Grade A, B
Basic size
Limit deviation
Basic size
Limit deviation
Basic size
Limit deviation
Basic size
Limit deviation
JB/T 7384.994
Continued Table 1
0, 0195
—0.0235
— 0. 0425
Thread specification
Signature size
Limit deviation
Basic size
Limit deviation
Basic size
Limit deviation
Basic size
Limit deviation
Thread specification
A, B line
A, B grade
Basic size
Plate limit deviation
Basic size
Limit deviation
Basic size
Limit deviation
Basic size
Limit deviation
0,0275
JB/T.7384.9—94
Continued Table 1
Thread number specification
Basic size
Basic size
Thread specificationwwW.bzxz.Net
Basic size
Basic size
—0.0305
JB/T 7384.9-94
(M14X1.5)
M10×1.25
M12×1.25
(M18X1.5)
Thread specification
Basic size
Basic size
Thread specification
Basic size
Basic size
(M27X2)
JB/T 7384.9-94
Continued Table 2
M20×2
(M20×1.5)
(M22×1.5)
(M30×2)
19. 6025. 6028. 60
18.7624.7627.70
(M33×2)
M24×2
M36×3
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
- Recommended standards
- GB 3107.2-1991 Red light parachute signal for ships
- JG 139-2001 Suspended glass curtain wall support device
- JGJ 48-1988 Store Building Design Code
- YY 0459-2003 Acrylic resin bone cement for surgical implants
- GB/T 4118-1992 Industrial chloroform
- CJJ 61-1994 Technical Specification for Urban Underground Pipeline Detection CJJ61-94
- JJG 315-1983 Verification Regulation of DC Digital Voltmeter
- JB/T 6315-1992 Steam turbine welding procedure qualification
- GB 5023.3-1997 Polyvinyl chloride insulated cables of rated voltage 450/750V and below Part 3: Unsheathed cables for fixed wiring
- HG 2859-1997 DDT technical
- GB/T 12366.5-1991 Guideline for the work of complex standardization General requirements of advance index
- JB/T 2001.57-1999 Types and dimensions of spherical accumulator tanks for water system pumping stations (PN=20MPa)
- GB/T 4702.3-1984 Chemical analysis methods for chromium metal - Molybdenum blue photometric method for determination of phosphorus content
- GB 8755-1988 Titanium and titanium alloy terminology metallographic spectra
- NY/T 1530-2007 Technical regulation for storage and transportation of longan and litchi after harvest
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail:bzxznet@163.com