JB/T 993-1977 Welded bulkhead right angle pipe joint body
time:
2024-07-15 03:34:51
- JB/T 993-1977
- in force
Standard ID:
JB/T 993-1977
Standard Name:
Welded bulkhead right angle pipe joint body
Chinese Name:
焊接式隔壁直角管接头体
Standard category:
Machinery Industry Standard (JB)
-
Date of Release:
1977-01-17 -
Date of Implementation:
1977-05-01
China Standard Classification Number:
Machinery>>General Parts>>J15 Pipe Accessories
alternative situation:
JB 993-1967; replaced by JB/T 966-2005
Description (Translated English) / downloadSkip to download
Summary:
JB/T 993-1977 Welded bulkhead right angle pipe joint body JB/T993-1977 Standard download decompression password: www.bzxz.net
Standard contentSome standard content:
Standard of the First Machinery Industry Ministry of the People's Republic of China Welded Bulkhead Right Angle Pipe Fitting Body
R,=d3/2
R2=B/2
Marking example:
Pipe outer diameter 28mm Bulkhead Right Angle Pipe Fitting Body: Fitting Body 28
JB993-77
The First Machinery Industry Ministry of the People's Republic of China issued the First Machinery Industry Ministry Standardization Research Institute proposed 366
JB993-77
Replace JB993-67bZxz.net
Implementation on May 1, 1977
Jinan Foundry and Forging Machinery Research Institute and others drafted the pipe
M36×2
M42×2
M52×2
M60×2
Technical conditions are in accordance with the provisions of JB1003-77. 1B99377
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
R,=d3/2
R2=B/2
Marking example:
Pipe outer diameter 28mm Bulkhead Right Angle Pipe Fitting Body: Fitting Body 28
JB993-77
The First Machinery Industry Ministry of the People's Republic of China issued the First Machinery Industry Ministry Standardization Research Institute proposed 366
JB993-77
Replace JB993-67bZxz.net
Implementation on May 1, 1977
Jinan Foundry and Forging Machinery Research Institute and others drafted the pipe
M36×2
M42×2
M52×2
M60×2
Technical conditions are in accordance with the provisions of JB1003-77. 1B99377
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
- Recommended standards
- GB/T 3291.3-1997 Textiles Textile materials properties and test terms Part 3: General
- QB/T 1753.5-1993 轻机产品图样及设计文件规定完整性
- GB/T 19434.3-2004 Safety specification for inspection of wooden intermediate bulk containers for dangerous goods Performance inspection
- GB/T 4256-2004 Straight shank and Morse taper shank reamer
- GB/T 14563-1993 Kaolin
- HG/T 20519.30-1992 Thermal insulation and sound insulation code
- GB/T 4588.4-1996 Sectional specification for multilayer printed boards
- JB/T 8705-1998 Technical requirements for rotor forgings without center hole for steam turbine generators below 500MW
- QB/T 1427-1999 Papermaking machinery - Paper cutting machine
- QB/T 1641-1992 Chemical analysis method for gypsum for ceramics
- HJ/T 209-2005 Technical requirement for environmental labeling products Packaging products
- GB 1495-2002 Limits and measurement methods for exterior noise during vehicle acceleration
- GB/T 15450-1995 Blank Detail Specification for Silicon Dual-Gate Field Effect Transistor
- HG/T 2027-1991 Industrial Benzyl Chloride
- GB 11580-1989 Small boat anchor chain
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail：wymp4wang@gmail.com