GB/T 15757-2002 Product Geometric Specification (GPS) Surface Defect Terms, Definitions and Parameters
time:
2024-08-08 15:21:12
- GB/T 15757-2002
- in force
Standard ID:
GB/T 15757-2002
Standard Name:
Product Geometric Specification (GPS) Surface Defect Terms, Definitions and Parameters
Chinese Name:
产品几何量技术规范(GPS) 表面缺陷 术语、定义及参数
Standard category:
National Standard (GB)
-
Date of Release:
2002-07-01 -
Date of Implementation:
2003-01-01
Standard ICS number:
Metrology and measurement, physical phenomena>>Measurement of length and angle>>17.040.20 Surface characteristicsChina Standard Classification Number:
Machinery>>General Machinery>>J04 Basic Standards and General Methods
alternative situation:
GB/T 15757-1995Procurement status:
eqv ISO 8785:1998
Release date:
1995-11-23Review date:
2004-10-14Drafter:
Wang Xinling, Wang Zhongbin, Gao Sitian, Wu Xun, Wang Zhaoqiang, Zhao YouxiangDrafting Organization:
China Academy of Mechanical Science, Times Group CorporationFocal point Organization:
National Technical Committee for Standardization of Product Dimensions and Geometry SpecificationsProposing Organization:
National Technical Committee for Standardization of Product Dimensions and Geometry SpecificationsPublishing Department:
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of ChinaCompetent Authority:
National Standardization Administration
Description (Translated English) / downloadSkip to download
Summary:
This standard defines the terms related to surface defects, the degree of surface defects allowed and the technical specifications for methods of measuring surface defects. This standard is applicable to technical documents, technical drawings and scientific and technological publications. The definitions in this standard do not involve surface roughness and surface waviness. This standard does not indicate whether surface defects should be evaluated, which depends on the specific application or the function of the surface. For special applications and manufacturing processes, special terms and definitions may be added when necessary. These terms and definitions will be specified in the relevant standards. Several special surface defects will be defined in other standards. GB/T 15757-2002 Technical Specification for Product Geometric Quantities (GPS) Surface Defect Terms, Definitions and Parameters GB/T15757-2002 Standard Download Decompression Password: www.bzxz.net
- Recommended standards
- SY/T 0075-2002 Specification for design of fire dikes in oil tank areas
- SY 0092-1998 Design specification for compressed natural gas filling stations for vehicles
- HG 2957.6-1984 Determination of combined water content of alum stone ore - Gravimetric method
- GB/T 15969.1-1995 Programmable controllers Part 1: General information
- GB/T 14187-2008 Packing containers - Fibre drum
- GB/T 4269.3-2000 Symbols for operator controls and other display devices on tractors and machinery for agriculture and forestry, and lawn and garden power machinery Part 3: Symbols for lawn and garden power machinery
- JB/T 5924-1991 Verification method for rated fatigue pressure and rated static pressure of pressure chamber of hydraulic components
- GB/T 3517-2002 Determination of plasticity retention rate (PRI) of natural rubber
- CB/Z 174-1980 Technical requirements for configuration and installation of submarine shock absorber pipes
- JB/T 5077-1991 General gear type test method
- GB 4423-1992 Copper and copper alloy drawn bars
- JJG 117-2005 Verification Regulation of Surface Plates
- JB/T 8031.4-1999 Side-mounted tool setting blocks for machine tool fixture parts and components
- HG/T 20517-1992 Steel low pressure wet gas holder
- JB/T 9002-1999 Speed reducers for transport machinery
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail：bzxznet@163.com