
GB/T 15575-1995 Steel product marking code
time:
2024-08-08 18:17:42
- GB/T 15575-1995
- in force
Standard ID:
GB/T 15575-1995
Standard Name:
Steel product marking code
Chinese Name:
钢产品标记代号
Standard category:
National Standard (GB)
-
Date of Release:
1995-06-05 -
Date of Implementation:
1995-01-02
Standard ICS number:
Metallurgy>>Steel Products>>77.140.01 General Steel ProductsChina Standard Classification Number:
Metallurgy>>Steel Products>>H40 General Steel Products
alternative situation:
Replaced by GB/T 15575-2008
Release date:
1995-06-05Review date:
2004-10-14Drafting Organization:
Information Standards Research Institute of the Ministry of Metallurgical IndustryFocal point Organization:
National Technical Committee on Steel StandardizationPublishing Department:
State Bureau of Technical SupervisionCompetent Authority:
China Iron and Steel Association

Skip to download
Summary:
This standard specifies the marking code method and commonly used marking codes for steel products. This standard is applicable to the marking codes for products such as steel wire, steel plate, steel strip, steel section, steel pipe, etc. GB/T 15575-1995 Steel Product Marking Code GB/T15575-1995 Standard download decompression password: www.bzxz.net
- Recommended standards
- HG/T 20636.3-1998 Division of design work between automatic control and piping
- JB/T 8824.3-1998 Technical requirements for unified thread taps
- GB/T 12763.9-2007 Specifications for oceanographic survey—Part 9:Guidelines for marine ecological survey
- JB/T 9833-1999 Tractor chassis parts names
- GB/T 5075-2001 Terminology of electrical fittings
- HG 3631-1999 4.5% highly effective cypermethrin emulsifiable concentrate
- SJ/T 11168-1998 Solder wire for soldering cleanout-free
- GB/T 15373-1994 Technical requirements for reciprocating lawn mowers
- GB 2508-1989 Marine lap-welded loose-fitting steel flange (four-position)
- GB/T 2900.33-2004 Electrical terminology Power electronics technology
- MT/T 928-2004 Series and parameters of cantilevered roadheader round scraper chains and drive chains
- SJ 3232.1-1989 Method for measurement of softening temperature of glass powder for soldering with low-melt point
- GB 19521.3-2004 Safety specification for inspection of hazardous properties of flammable gas dangerous goods
- GB/T 11606.1-1989 General principles for environmental test methods for analytical instruments
- GB/T 4103.11-2000 Chemical analysis methods for lead and lead alloys - Determination of zinc content
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail:bzxznet@163.com