JB/T 10443.1-2004 Specification for laminated paperboard Part 1: Definitions, classification and general requirements

This part specifies the definition, classification and general requirements of laminated paperboard. This part applies to laminated paperboard. JB/T 10443.1-2004 Laminated paperboard specification Part 1: Definition, classification and general requirements JB/T10443.1-2004 Standard download decompression password: www.bzxz.net

ICS29.035.99
Machinery Industry Standard of the People's Republic of China
JB/T10443.1-2004
Specification for laminated pressboard Part 1: Definitions classification and general requirements (IEC60763-1:1983, MOD)
Published on February 10, 2004
Implementation on June 1, 2004
Published by the National Development and Reform Commission of the People's Republic of China Foreword
Normative references
Terms and definitions
General requirements
Surface condition,
Machinability
Supply conditions
JB/T10443.1—2004
JB/T10443.1—2004
JB/T10443 Specification for laminated paperboard is divided into three parts: Part 1: Definitions, classification and general requirements: Part 2: Test methods: Part 3: Specification for single material Specification for laminated pre-pressed paperboard - Type LB3.1.1, LB3.1.2, LB3.3.1 and LB3.3.2. This part is the first part of JB/T10443. This part is formulated for the first time.
This part is modified to adopt the International Electrotechnical Commission (IEC) publication IEC60763-1:1983 "Specification for laminated paperboard Part 1: Definitions, classification and general requirements" (English version). The main difference between this part and IEC60763-1:1983: According to the requirements of GB/T1.1-2000, the chapter "Normative Reference Documents" is added. This difference has been compiled into the text and marked with a single vertical line in the blank space of the corresponding clause. This part was proposed by the China Machinery Industry Federation. This part is under the jurisdiction of the National Technical Committee for Standardization of Insulating Materials. Drafting units of this part: Guilin Electric Science Research Institute, Liaoyang Industrial Paperboard Co., Ltd. Main drafters of this part: Luo Chuanyong, Zhu Meilan, Qi Ming. n
1 Scope
Specification for laminated paperboard
Part 1: Definition, classification and general requirements This part of JB/T10443 specifies the definition, classification and general requirements of laminated paperboard. This part applies to laminated paperboard.
2 Normative references
JB/T10443.1-2004
The clauses in the following documents become the clauses of this part through reference in this part of JB/T10443. For all dated references, all subsequent amendments (excluding errata) or revisions are not applicable to this part. However, parties to agreements based on this part are encouraged to study whether the latest versions of these documents can be used. For all undated references, the latest versions apply to this part. GB/321—1980 Priority number and priority number system JB/T8989.1-1999 Specification for pressboard and thin paperboard for electrical use Part 1: Definitions and general requirements (eqvIEC60641-1:1979)
3 Terms and definitions
The following terms and definitions apply to this part. 3.1
Pressboard
Paperboard made of high chemical purity pulp from plant raw materials, usually made on intermittent paperboard machines, characterized by high density, uniform thickness, smooth surface, good mechanical strength, softness and electrical insulation properties. To meet certain purposes, the surface may have a reticulated pattern. 3.2
Laminatedpressboard
Paperboard made by bonding several sheets of paperboard with an adhesive. 4 Classification
Based on the components and properties, this section lists various types of laminated paperboard in Table 1. The model uses the same model as the paperboard in JB 8989.1, but with "L" to indicate lamination (e.g. LBO.1). Table 1 Classification
Basic typebZxz.net
Specially high chemical purity calendered paperboard
High chemical purity calendered paperboard
Pre-pressed paperboard, a hard and strong paperboard with high purity and high mechanical strength, with a reticulated surface
LB0.1100% sulfate wood pulp
LB0.2100% cotton pulp
100% sulfate wood pulp
100% cotton pulp
A mixture of sulfate wood pulp and cotton pulp
A mixture of cotton and linen
100% sulfate wood pulp
100% cotton pulp
A mixture of sulfate pulp and cotton pulp
A mixture of cotton and linen
Application examples!
Electrical equipment for paperboard requiring particularly high chemical purity
Transformer
Transformer
JB/T10443.1—2004
Basic types
Calendar with high chemical purity and good oil absorption
Soft paperboard
Paperboard with high chemical purity and good oil absorption
Low porosity calendered paperboard, with glue
Low porosity calendered paperboard, with filler Table 1 (continued)
LB4.1100% kraft wood pulp
100% Cotton pulp
Mixture of kraft wood pulp and cotton pulp
Mixture of cotton and linen
100% kraft wood pulp
100% cotton pulp
Mixture of kraft wood pulp and cotton pulp
Mixture of cotton and linen
100% kraft wood pulp
100% cotton pulp
Mixture of kraft wood pulp and cotton pulp
Mixture of cotton and linen
100% kraft wood pulp
The application examples are only for illustration of each type, but there is no limitation to other applications. General requirements
Application examples
Transformers and oil-filled equipment
Transformers and oil-filled equipment
Motors and general electrical equipment
General electrical equipment
5.1 Components
Single paperboard used to make laminated paperboard shall meet the requirements of the corresponding paperboard in JB/T8989.1, except that the thickness is not required to meet the requirements. Laminated paperboard should be made by laying paperboard in the same direction and bonding it with a suitable adhesive. If the adhesive is changed, the purchaser should be notified in time.
Note: If the structure of the laminated paperboard is not laid in the same direction, it should be specially stated. 5.2 Surface state
The surface of the paperboard should be calendered or have a reticulated pattern.
5.3 Machinability
The paperboard should be able to be machined with the tool recommended by the manufacturer suitable for its processing. 6 Size
Preferred thickness is 10mm, 12mm, 15mm, 20mm, 25mm, 30mm, 40mm50mm, etc. as specified in the GB/321 series.
Supply conditions
Paperboard packaging should ensure adequate protection during transportation, loading and unloading and storage. 8 Marking
Delivered paperboard should be clearly and permanently marked with the following: a) Manufacturer's name or trademark;
Paperboard type, such as LB2.1, LB4.3: b)
Nominal thickness:
Specifications of each paperboard and weight of each package. People's Republic of China
Mechanical Industry Standard
Specification for Laminated Paperboard
Part 1: Definitions, Classification and General Requirements JB/T10443.1--2004
Published and distributed by Machinery Industry Press
No. 22 Baiwanzhuang Street, Beijing
Postal Code: 100037
Format 890mm×1240mm
1/16·0.5 Printing Sheet·8,000 Words| |tt||1st edition, 1st printing, June 2004
Book number: 15111: 7303
Website: http://cmpbook.comEditorial office phone number:
Direct sales center phone number:
(010)88379779
(01088379693
All books without anti-counterfeiting labels on the cover are pirated
Copyright reserved
Infringements will be investigated
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.