GB/T 17724-1999 Information transmission of shipbuilding piping systems

This standard specifies the minimum data required to be transferred from the technical department to the production department during the pre-processing and assembly of the shipbuilding industry piping system. This standard does not include the generation, representation and file structure of this data. GB/T 17724-1999 Shipbuilding Piping System Information Transfer GB/T17724-1999 Standard Download Decompression Password: www.bzxz.net

ICS 47. 020. 30
National Standard of the People's Republic of China
GB/T 17724—1999
eqy1so8277:1988
Piping system
Information transfer
Shipbuilding Pipework-Information transfer1999-04-15Published
1999-12-01Implementation
Published by the State Administration of Quality and Technical Supervision
WGB/T 17724—1999
TSO8277:1988 "Shipbuilding Pipework Information Transfer" specifies the information, which is an important technical basis standard for computer-aided piping production design and manufacturing. Computer-aided design and manufacturing of ship piping has been widely adopted in my country's shipbuilding industry. Therefore, this standard is formulated on the basis of equivalent adoption of ISO8277:1988. It will play a positive role in unifying the technical language of computer-aided design and manufacturing of ship piping in my country's shipbuilding industry and strengthening scientific and technological exchanges at home and abroad. This standard is proposed by China Shipbuilding Industry Corporation. This standard is sponsored by the Comprehensive Technical and Economic Research Institute of China Shipbuilding Industry Corporation. The drafting unit of this standard is: China Shipbuilding Industry Corporation No. 10 Research Institute. This standard is mainly composed of: Chen Ether Group.
ww.bzsoso:comGB/T177241999
ISO Foreword
ISO (International Organization for Standardization) is an international organization composed of international standard organizations (ISO member bodies). The formulation of international standards is carried out by ISO technical committees. Each member group has the right to participate in this committee if it is interested in the subject of a technical committee. International organizations with governmental and non-governmental relations with ISO may also participate in this work. The draft international standards adopted by the technical committees shall be sent to the member bodies for approval before being approved as international standards by the ISO Council. According to the ISO standard formulation procedure, the draft national standard shall become an international standard only if at least 5% of the member bodies vote in favor. The international standard ISO 8277 was formulated by ISO/TC:8 Technical Committee on Shipbuilding and Superstructures. Users should note that all international standards are subject to frequent review and revision. Unless otherwise specified, other international standards referenced in this standard refer to the latest versions.
1 Scope
National Standard of the People's Republic of China
Shipping Piping System Information Transfer
Eqv1s8277:1988
This standard specifies the minimum data required to be transferred from the technical department to the production department during the pre-processing and assembly of the piping system in the shipbuilding industry.
This standard does not include the data generation, presentation method and file composition. 2 Pipeline system information
There are three types of piping system information that need to be transferred from design to manufacturing, namely: standard parts information, non-standard parts information and management information, see Table 1.
1 Pipeline system information
2. 1. 3. 1
2. 1. 3. 2
Information category
Standard parts information
Identification number
Name, standard
Nominal strength PN
Test strength
Nominal diameter nN
Certificate or information based on the certificate
State Administration of Quality Supervision, Inspection and Quarantine 1999-04-15 Approval Note
A special character string, which can be part of or include the numbers listed in 2.3.
Each component should be named with reference to international standards, national standards or industry standards.
Strength, sealing, pressure test steps not clearly specified in relevant standards
Dimensions of pipe fittings for assembly after processing
All and part; the position of components should be expressed in the coordinate system of the whole ship or equipment, or expressed in relative dimensions (optional) Description of accessories required for installation, such as gaskets, bolts, brackets, etc.
Implementation on December 1, 1999. Edited
2. 2. 3. 1
2- 2. 8. 1
2- 2. 8. 2
2.2. 8. 4
2- 2. 8. 5
2. 2. 8. 7
2. 2. 8-8
2. 2. B 9
2. 2. 8. 10
Information category
Non-standard part information
Identification number
Name, drawing number
Nominal pressure PV
Test pressure
Nominal diameter DN
Semi-finished product
Working information
Welding flange and hole location
GR/T17724--1999
Table 1 (end)
Each component should refer to the drawing containing manufacturing information. The name should follow the international standards and the same standards. Strength, sealing and pressure test according to national or industry standards. Stop discbzxZ.net
Name and size before final processing
Bending, including bending sequence and heat treatment
Welding, including beveling heat treatment
Finishing
Anti-corrosion treatment
Information on required certificates
Management information
System number
Stock number
Order number
Fitting number
Delivery date
See 2.1. 8
View 2.1.9
Prefabrication shall be approved by the designated supervision department Letters, numbers or character strings
See 2.3.1
See 2.3.1
This 2.3.1
W3 Flowchart
GB/T17724—1999
This governs the data and material flow and interface required for addition, installation and connection Figure 1. Design
Original
Constant circuit system diagram
Solution circuit system model
Isometric drawing
Prefabrication! Figure 1. Material flow chart of pipe production process (standard production unit, information flow, material flow chart, material flow chart, etc.)
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.