GB 5237.6-2004 Aluminium alloy building profiles Part 6: Thermal insulation profiles

This part specifies the requirements, test methods, inspection rules, marking, packaging, transportation, storage and contract contents of thermal insulation aluminum alloy building profiles. This part is applicable to thermal insulation aluminum alloy building profiles of strip-through type or cast type composite. Thermal insulation aluminum alloy profiles used in other industries can refer to this part. GB 5237.6-2004 Aluminum alloy building profiles Part 6: Thermal insulation profiles GB5237.6-2004 Standard download decompression password: www.bzxz.net

ICS. 77. 150. 10
National Standard of the People's Republic of China
CB5237.6-2004
Aluminium alloy profiles for architecture
Part 6: Thermal insulation profiles
Aluminium alloy extrurled profiles for architecture-IPart 6: Thermal barrier profilesIssued on 2004-11-01
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of ChinaAdministration of Standardization of the People's Republic of China
Implementation on 2005-03-01
Clause 4.5.2 of this part is mandatory; the rest is recommendatory. G55237 new alloy type 3 is divided into six parts: Part 1: ± materials || tt|| Part 2: Anode chemical packaging materials || tt|| Part 1: Electric ice coating materials || tt|| Part 1: Powder water spraying materials || tt|| Part 5: Deep spraying materials || tt|| - Part 6: Heat insulation type || tt|| Part 13: GR 5237.6—2004
This part of the document is prepared by the following standards: 2N1402420 International Thermal Profile Energy Requirements Test AAM4TIRA310. Aluminum Alloy Profile Energy and 1S04632:1192 Plastic Environment Application Ball or Physical Pressure Test Methodology Standard: This part of the appendix A is prepared by the standard of Dongxiefeng Baoling (Suzhou) Insulation Materials Co., Ltd. The appendix A of this part is a standard for the design of the appendix.
Appendix 3 of this part and the secondary appendix of the appendix are the secondary appendixes of this part, which are proposed by the China Nonferrous Metals Industry Association. This part is prepared by the National Nonferrous Metals Industry Association. This part of the main units, Tuojian Nanzhong Driving Industry Co., Ltd. Foshan Jinlan Kai Factory "Youlong Gongchuan. Delijianfa Aluminum Service Company, Lexingfa Innovation Co., Ltd., Guose Jinban Industrial South China Product Quality Supervision and Inspection Center Production Lai Jianmei Village! Co., Ltd.
This department raised the drafting list: Beijing East Asia Aluminum Co., Ltd., Xinuofeng Baoben (Xinzhou) Weak Heat Material Co., Ltd., this part of the main people, Xiangzhisa, Qu Wenxin, Lin Huo, Xiao Guangyuan, Gong Wending, Kuawei, Pan Shiyao, Lun Huiche, Huang E, Zhang Zhongxing, Yi Shuo type:
This part is mainly the national package enterprise standard limited education academic committee public responsibility interpretation. 1 Fan Tian
Aluminum alloy building profiles
Part 6: Thermal insulation profiles
CR 5237.6—2C04
This part specifies the requirements, test methods, aging rules, marking, packaging, transportation, storage and network content of heat-insulating furnace alloy continuous building materials.
This part is used for hot-selling alloy injection molding profiles produced by other industries: the overall implementation rate of part 2 Normative references to the following documents are also available through the use of the car part or the terms of this part. In order to make the use of the documents available, all subsequent supervision and revisions (excluding the internal consultation of the bad knowledge? Or the whole set of garbage are all manual use of the technical part, but Apple's long-term non-part of the international design of the parties to the mail research is a teaching new version of the wood, the date of the use of the documents after the note of its volume in the use of this part, G/T3) and sales of gold-containing processing products packaging, cooperation, delivery, storage B5/.1-2004 super alloy building profiles Part 1: base material 5837,2-20014
lead alloy continuous rainbow step village Part 2: positive oxidation, if the color village GB 3237.1-2004
aluminum alloy effect pressure village Part 3; heart forbidden coating Ling type plan [Ting 35237.4200 along the alloy construction profiles Part +: powder type GR = 237. F-3004
Alloy profiles, carbon sprayed profiles C13/T6652 Analysis of practical water specifications and test methods YS/T436 Alloy building profiles
YST25-2005 Non-ferrous aluminum alloy injection molding profiles 3 Terms, definitions
The following terms and definitions apply to this part of 5237. 3.1
Thermal barrier
Metal material used to connect the thermal conductivity of aluminum alloy profiles: 3.2
Through strip i nnertionmethodulugy
Wine through opening, through the case, fall right two words. The reported heat material into the estimated alloy profile through the throw, open the aluminum alloy village craftsman intermixing medicine development method.
Talk about the injection type pouredand(kebrldgedmethodology the liquid filler material into the aluminum alloy model for solidification, remove the alloy model in the balance of time to make it open the connection through the heat holding material to the aluminum alloy model disconnected parts combined in a certain composite way, 3. 4
Thermal insulation profiles thermul harrterprofiles with thermal insulation alloy profiles made of information GB5237.$—2004
Characteristicvalues
Based on the test reliability of the data distribution, the performance value of the guarantee rate is calculated. 4 Requirements
4.1 Product classification
4.1.1 Classification;bzxz.net
The mechanical properties of the product are divided into two categories, as shown in Table 1
2.1.2 Cutting drawing
Mechanical properties
After cutting, the object can
The product cutting drawing should comply with the provisions of YS/433, or be replaced by the supply demand 4.1.3 Marking
Combination method
Good test, casting type
Product name, product category, heat insulation material code, aluminum alloy profile model and makeup and processing method and processing table T? , 5237.54 part of the serial number, colored electrophoresis senior display piece \3 "mark its surface treatment method or, thermal insulation material high safety, product size and this part number interval Ning Ning said, the penalty below:
room 1:
hand will be made of the letter cloth ceiling surface points with electric bulb except for the building and the new treatment with aluminum type through the way through the heat material PA66CiP25 two production 14.mm image combined example A Monrui heat air material fee Shang chemical number: i1x1 method seat 0mm1. marked as: heat material A11FA:F 66 T5731J1.8X 29 G6 E2:7,6004 month 6: alloy manufacturing and then send urgent 1, the surface by equipment or chemical treatment of the optical support is not necessary / reduction of the material production width 3 platform made of heat load code: ix1 size length and rnnn mark: heat Us R5R FUI EE3 T32 0. 6: X6 Cc GB 52, E2344.2 Aluminum alloy profiles
Heat insulation type is named alloy 4, shall comply with GB5237.2-52.17.5200/Y5/T139-200% of the cabinet should be created
4.3 Network heat insulation materials
International heat insulation type material specification village material, plate in accordance with the provisions of Appendix A: 4.4 Product size deviation
The difference between the product size and the product size shall comply with the provisions of Article 21-2004 5.4.1-4.9, the product shall be connected to the central heat treatment material.
4.5 Product performance
4.5.1 The product has the pre-cut test and the mold and small test results are recommended to meet the requirements of the table: the purchaser can make the product tensile performance in accordance with the requirements. The two parties need to negotiate the energy indicators of the military vehicle and specify them in the contract. 4.5.2 The results of the heat limit test of the contract group should meet the requirements of the 2nd standard. 4.5 Product appearance quality alliance
4.6.1 Wear-type heat-resistant materials are allowed to have a slight effect. But the foundation is not allowed to have a certain level. 4.6.2 The porcelain profiles are required to be heat-resistant except for the temporary bridge of the two metals. The cut should be regular and flat: Table 2
Table:
Weaving shear test
According to the "pull test
Wet test
Good removal ring matching
Beijing, etc. Time
:(:mm:
Experimental installation list
Micro-resistant position certificate
CB5237.6—2004
Joining point format 0
Note type
. After agreement between the supply and demand parties, the product performance test can be carried out at this child, and the product performance test temperature can be carried out according to the relevant product description (see C), and the design of the product performance test station needs to be recommended for other
The demand party has other special qualities in common, and the demand party should negotiate with the contract to make the results 5 test methods
Aluminum alloy profile inspection method
Including pressure village G5232~5237.—2004 or) Y/153—2003 corresponding provisions for inspection. 5.2 Testing method of heat insulation materials
The heat insulation materials shall be tested according to the provisions of Appendix A. 5.3 Testing method of product size deviation
The product size is measured with corresponding new sheet ruler, sub-rule gauge, feeler gauge, measuring ruler and other tools: Table 6 Products treated with pine dust removal or spraying. The horizontal deviation of the products shall be measured after the surface is removed: 5.4 Product performance testing method
5.4.1 Sample condition adjustment
Before product performance or testing, the sample shall be stored in the test room at room temperature of 33:=) 53%=10% humidity. 5.4.2 Test temperature
5.4.2.1 Test temperature of natural products
Temperature: -23 12), 2℃: 2), high temperature: 1 83+).5.4.2.2 Fully filled product test temperature
room: -23±292) Step group-72: 5.2.3 Longitudinal shear test method
5.4.3.1 Test fixture
Test fixture should be able to effectively prevent the detailed cutter from rotating or shifting, and the force should be transmitted through the K-shaped support to the reverse wheel profile blood, and the internal parts of the cutter should be completely intact, and the heat of the material cannot be in contact with the material. Test set stomach small picture science gram medicine: good book
Jinglan science.
G 5237. 6--2334
5.4.3.2 Test support
is used to clamp the sample. After the sample is placed at the test temperature for 10tli-1, it is loaded at a loading speed of 1m:m/rain-5m/min to carry out the printing test. The added load and the corresponding shear displacement should be recorded until the measurement is made. The maximum shear displacement is 5.4.2>, and the maximum shear displacement is 1m. The measurement should be made directly on the specimen. 5.4.3.3 Calculation
According to formula (1), calculate the maximum shear force that each specimen can withstand per unit length difference, and then calculate the specimen characteristic value T = E!
according to formula (2) where:
Maximum shear force that can be borne per unit length, in Newtons per millimeter (mm); actual length unit is test (m):
Maximum shear force, in Newtons per millimeter (N/mm):
I. = -2.02 × S
Longitudinal tensile test value, in Newtons per millimeter (N/mm): The average maximum longitudinal tensile force that 10 specimens can withstand per unit length, in Newtons per meter (N/mm); The standard deviation of the corresponding specimens, in Newtons per meter (N/mr). 5.4.2 Longitudinal tensile test method
5.4.4.1 Test transposition
The test clamp can effectively prevent the test village from being damaged by improper tooling (such as initial addition, tearing of the mold, etc.). Please refer to Figure 2 for the schematic diagram of the test equipment.
A-type thermal insulation material,
5.4.4.2 The specimen
Type B insulation material test must first pass the room source longitudinal shear test to avoid failure (see 5,1.3. There is a 7.0tm reverse slip between the insulation material and the aluminum grid.>1. Do the mold longitudinal tensile test, Type B material specimens do not need to be subjected to temperature longitudinal shear test first, and point technology is used for damage test. 5.2.4.3 Test operation
Put the test grid with variable light: After the test Y is placed at the set or temporary retreat depth (5..2) for 10 mis, perform the tensile test at a pulling speed of 1mm/mn~nm/mi1 to test the effectiveness of the protection control (such as the occurrence of scratches on the profile or new cracks in the heat-resistant material or the separation of the profile and the heat-insulating material), and measure the maximum tensile strength.
5. 4. 4. 4 Calculation
According to the formula: 31Calculate the maximum tensile force that the test belt can withstand per unit depth. Calculate the loss using (1), which is called the special value. Q=RrL
The maximum tensile force that the sample can withstand per unit length, unit is Newton/mI);
The maximum tensile force that the sample can withstand, unit is Newton (N);
Formula:
Q =Q-.2×S
. The unit is Newton/meter (N/mm);Q
GB5237.6—2004
The average value of the maximum tensile force that a test fence can withstand per unit length, unit is Newton/mm). 5.4.5 Torsion test method 5.4.5.1 Test device The test equipment shall be such that the test specimen can be effectively prevented from rotating or moving during cutting. The action point shall be on the surface of the insulation material and the aluminum alloy profile. The hot-melt material shall be cast on the surface of the casting. The test device diagram is shown in the figure. 5.4.5.2 Test operation After the specimen is ready, the specimen shall be placed at the set test temperature (5.4.2)F for 1min, and then subjected to a load range of 5mra/mn for a simulated test. When the maximum load is exceeded, the specimen will be torsionally damaged, torn or torsionally cracked. 5.4.5.3 Calculation The force shall be calculated according to formula (5).
M-, J for short, unit is "Newton meter [kN-mIL; F
Maximum load, unit is Newton (KN):
-The distance from one-third of the height of the trapped material to the height of the force, unit is meter (mm) 5.4.6 High temperature endurance load test method
5.4.E.1 Specimen
A The material to be tested for the heat treatment must first pass the actual temperature shear failure test. 1.3, the material number of the heat treatment material is 2.m of the standard). The room temperature shear failure test specimen of 5.4.3 can be used. 5.4.6.2 Test operation and calculation
The specimen is tested at a temperature of 83% + 2℃ and (10 = 0.5N/Tm) to resist other After 1000 pieces are cut continuously under the action of load, the deformation of each sample is measured along with the heat test pulp, and the deformation of all samples is calculated. The most average but. Then for these tests, the low bias is carried out, and the micro-tension method is used: and the maximum tensile force per unit length is calculated according to formula (3). Then according to the public (4), the low temperature, high strength and low tensile characteristics are calculated respectively.
5.4.7 Thermal cycle test method
5.4.7.1 Sample
Before the test of thermal insulation profiles, it is necessary to first change the temperature to the case temperature (called>1681), and then the sample is subjected to the state withering specified in Article 3.4.1.
GH 5237.6—2004
5.4.7.2 Test operation and calculation
The test column is subjected to five-fold test of thermal cycle as shown in medical 1. The number of test cycles is selected according to the different uses of thermal insulation plastic materials. [Use the indicator to carry out the 1st cycle: use the upper Maoye Yu model to carry out the 2nd cycle. Use the pick-up and take-off to carry out the 1st cycle: use the new HF in the model, use the scale value 0.C2 mm, then the vernier ruler is withdrawn to measure the two frequencies of the medical material - 1, 1, 11, read the total carefully and divide by 4, the new value is the deformation, calculate the average deformation of these samples and 100 (as shown in the figure, one of the new deformations is shown), and then take the formula from the sample to obtain the ratio of 3m to 1mm, and do the room temperature grade test according to the formula to calculate the maximum shear force that can be borne on each unit length according to the public test (calculation of the air temperature longitudinal resistance characteristic value. Temperature
(29±2)
5.5 Inspection of product appearance quality
The most important thing is to inspect the quality by day.
6 Inspection specifications| |tt||6.1 Inspection and Acceptance
6.1.1 The supplier's technical supervision department shall conduct inspection to ensure that the product quality meets the requirements of this part and fill in the quality certificate.
The supplier can re-inspect the received products according to the provisions of this part. If the re-inspection results do not meet the requirements of this standard and the order contract, the supplier shall submit a written request to the supplier and the supplier and buyer shall resolve the issue. The objection to the difference in quality and size shall be raised within one month after the product is received. The objection to other performance issues shall be raised within one month after the product is received. If re-inspection is required, the re-inspection shall be carried out by the buyer and the buyer.
6.2. The batches of heat-insulating profiles shall be submitted for acceptance in batches. Each batch shall consist of heat-insulating profiles of the same grade and state and heat-insulating profiles of the same type and specification made by the same combination process. 6. 3. Delivery inspection Before the batch of products leaves the factory, the alloy profiles, product dimensional difference, product longitudinal shear characteristic value at full temperature and product residual quality shall be inspected. 5.4. Type inspection When there are the following conditions, the product type inspection shall be carried out according to the requirements specified by the department. a1. When the trial production of new products is completed, the product type inspection shall be carried out according to the requirements specified by the department. After the actual production, the product type inspection shall be carried out. If there are major changes in the materials and processes, which may affect the product performance, the product type inspection shall be carried out at the end of the continuous production. 6.5 Sampling
The test head of the insulation material should be complete, and the sampling should comply with the provisions of left 3. Table 3
Joint detailed provisions
Production! Before the establishment of the political. Wanke can use the thermal profile? Sampling of old alloy profiles from above
Inspection of separated villages
Production of products
Strictly check the effectiveness of the tensile test room
Product calibration
Product temperature durability test
Product environmental testing
Product appearance quality
6.6 Inspection results
Sampling 1H.227.-20 or YS:459-2003 Scan the product according to the agreed agreement
(237,12/94 Newton to 13 visual
Guide the whole government to take 2 pieces in each, control the lower part and two moves to take 3 samples, and do hot , the sample book can be divided into 3 parts - respectively "monthly, room, high-tech test, test length 16>mm! 1u.u.. pull test can be selected with the 16mm root, report in the middle to collect 1 sample, south wrong cold mark take 3 anti-stop test, test for marking, street test "parts (each part is divided into low and high tensile test, sample length u:11mm
year batch dare 2 roots, each report in the middle to collect 1 test, two increase respectively take 2 test analysis. Sample length 3cu.u.1mu.
root inspection
inspection age determination results are stipulated in 4
marking, packaging, transportation, storage
7.1 The product of the joint venture is engraved with the following customer labels (or certificates): the seal of the supplier's technical supervision department; the total quality inspection of the aluminum alloy, the wet and hot material inspection of the production, the product cutting inspection, the product design inspection, the product drawing and reduction inspection, the product high quality and durable inspection or the product heat damage inspection, the supply sequence, trademark; the brand and makeup of the profile: 0015 related product quality inspection form, the supply and demand effect and the other Strict whole system inspection, select 4 materials from each delivery position to report production, take one as a group, according to the characteristics of the sample for testing, judge this batch of products does not meet the control quality, when the state medical batch of products does not meet the extension, special value is unqualified, from this batch of products collect double good mother cattle, divide them equally, the group test again, if still qualified: the product size is 100 days
Material name:
Product name, do not make repairs too much sample processing method Production period Batch number:
Local extension number:
Production license number.
Packing, transportation, storage
Production The packaging, transportation and storage of products shall comply with the provisions of /T31. Quality assurance certificate
Product quality certificate:
Supply station name, location, location, and address;
Material type and finish:
Product name, code number
Product name, specifications and surface treatment method:
Product date or number:
Year or number of products:
Product analysis and inspection results printed by the supplier's technical supervision department;
Order form or order form (or contract) for the materials listed in this part. Product name, combination method, category, specification and other presentation methods; Material code:
Insulation material name or code:
) Product coating type, grade, gloss, color and other related requirements; Product density grade:
Product root number:
TR52.37.6—2004
Requirements for product performance such as buckle, shear elasticity, tensile strength, cross-sectional area, heat transfer coefficient, etc.; Special test requirements (aging test); Special packaging method or requirements:
This part number,
CB 5237. 620C4
A.1 Specification
Standard Appendix
Insulation Materials
This appendix specifies the quality requirements, test methods, test results and test results of thermal insulation materials for ceramic thermal insulation profiles:
This appendix is ​​applicable to steel or ceramic composite high-quality alloy building profiles. A.2 Requirements
A.2.1 Thermal insulation materials The results of the longitudinal tensile test, underwater slow test, damp heat test and stress cracking test shall all conform to the specifications of Table A,1. Test items: longitudinal tensile test, underwater slow test, damp heat test, stress cracking test, longitudinal tensile test, longitudinal tensile strength test: 24N/mm2. The test results are compared with the standard tensile characteristic values ​​in the opposite direction. The test results are compared with the standard tensile characteristic values ​​in the opposite direction. The internal tensile characteristic values ​​are lower than the standard tensile characteristic values ​​in the opposite direction. No double lines shall appear after 35 months of tightening. 4.2.2 The dimensions, surface pressure, rationality and other performance requirements of the thermal insulation materials shall be agreed upon by the supply and demand parties and specified in the contract:
A.3 Test method
A.3.1 Sample state adjustment
Before the following absorption test, the sample shall be stored in the test room (23%→27).50%±13% standard test room for 24h, 4,3.2 Variable temperature tensile test method
Take 1 sample for heating: 2%2 mold tensile test sample net tensile temperature is 1r/mir.--sm/ri. According to the formula (5) in the text, calculate the maximum impact resistance that the sample can withstand per unit length, and according to the formula () in the text, calculate the tensile strength. A3.3 Water immersion test method
3.3.1 Place 20 or H G/G692 standard pieces in grade water (the supply is 23%! 2%!) for 1000 minutes and then take them out. Pass the sample slurry through (A.3.1), and select 1 of the test group for the low temperature and high temperature tensile test. A3.2.2 After the sample is stabilized under the modified test short change (text 5.4.21), it is subjected to tensile test at a speed of 1immm/min-~:mml/rim.
A.3.3.3 The unit length of these samples is calculated by formula (5) in the text. What can be borne on the surface is the human reverse fairy - then according to the formula (4) of the text, the low temperature and internal temperature tensile characteristic values ​​are calculated separately, and the characteristic values ​​obtained by the actual ancestor's pick-up test (A. are compared respectively. n.3.4 Wet heat test method
glue individual sincerity, in the product Huitai 90% medicine high humidity (wear the product with the heat material reduction degree Shiji injection type product trap heat material humidity is 75℃: the environment is exposed to the benefit of the sample natural state (A.31. Then the room is 23 Shiman can stand the test, the tensile speed is m/m~5ma/mn, the positive formula (calculate this I test report on the unit length can withstand the maximum net tensile knife, according to the text public (1) calculate the tensile will borrow. And the room temperature horizontal tensile whole, A, 3, 1) slightly get the characteristic valueTable 3
Detailed regulations
Production! Before the establishment of the political. Wanke can use the thermal profile? Sampling of old alloy profiles from above
Inspection of separated villages
Production of products
Strictly check the effectiveness of the tensile test room
Product calibration
Product temperature durability test
Product environmental testing
Product appearance quality
6.6 Inspection results
Sampling 1H.227.-20 or YS:459-2003 Scan the product according to the agreed agreement
(237,12/94 Newton to 13 visual
Guide the whole government to take 2 pieces in each, control the lower part and two moves to take 3 samples, and do hot , the sample book can be divided into 3 parts - respectively "monthly, room, high-tech test, test length 16>mm! 1u.u.. pull test can be selected with the 16mm root, report in the middle to collect 1 sample, south wrong cold mark take 3 anti-stop test, test for marking, street test "parts (each part is divided into low and high tensile test, sample length u:11mm
year batch dare 2 roots, each report in the middle to collect 1 test, two increase respectively take 2 test analysis. Sample length 3cu.u.1mu.
root inspection
inspection age determination results are stipulated in 4
marking, packaging, transportation, storage
7.1 The product of the joint venture is engraved with the following customer labels (or certificates): the seal of the supplier's technical supervision department; the total quality inspection of the aluminum alloy, the wet and hot material inspection of the production, the product cutting inspection, the product design inspection, the product drawing and reduction inspection, the product high quality and durable inspection or the product heat damage inspection, the supply sequence, trademark; the brand and makeup of the profile: 0015 related product quality inspection form, the supply and demand effect and the other Strict whole system inspection, select 4 materials from each delivery position to report production, take one as a group, according to the characteristics of the sample for testing, judge this batch of products does not meet the control quality, when the state medical batch of products does not meet the extension, special value is unqualified, from this batch of products collect double good mother cattle, divide them equally, the group test again, if still qualified: the product size is 100 days
Material name:
Product name, do not make repairs too much sample processing method Production period Batch number:
Local extension number:
Production license number.
Packing, transportation, storage
Production The packaging, transportation and storage of products shall comply with the provisions of /T31. Quality assurance certificate
Product quality certificate:
Supply station name, location, location, and address;
Material type and finish:
Product name, code number
Product name, specifications and surface treatment method:
Product date or number:
Year or number of products:
Product analysis and inspection results printed by the supplier's technical supervision department;
Order form or order form (or contract) for the materials listed in this part. Product name, combination method, category, specification and other presentation methods; Material code:
Insulation material name or code:
) Product coating type, grade, gloss, color and other related requirements; Product density grade:
Product root number:
TR52.37.6—2004
Requirements for product performance such as buckle, shear elasticity, tensile strength, cross-sectional area, heat transfer coefficient, etc.; Special test requirements (aging test); Special packaging method or requirements:
This part number,
CB 5237. 620C4
A.1 Specification
Standard Appendix
Insulation Materials
This appendix specifies the quality requirements, test methods, test results and test results of thermal insulation materials for ceramic thermal insulation profiles:
This appendix is ​​applicable to steel or ceramic composite high-quality alloy building profiles. A.2 Requirements
A.2.1 Thermal insulation materials The results of the longitudinal tensile test, underwater slow test, damp heat test and stress cracking test shall all conform to the specifications of Table A,1. Test items: longitudinal tensile test, underwater slow test, damp heat test, stress cracking test, longitudinal tensile test, longitudinal tensile strength test: 24N/mm2. The test results are compared with the standard tensile characteristic values ​​in the opposite direction. The test results are compared with the standard tensile characteristic values ​​in the opposite direction. The internal tensile characteristic values ​​are lower than the standard tensile characteristic values. No double lines shall appear after 35 months of tightening. 4.2.2 The dimensions, surface pressure, rationality and other performance requirements of the thermal insulation materials shall be agreed upon by the supply and demand parties and specified in the contract:
A.3 Test method
A.3.1 Sample state adjustment
Before the following absorption test, the sample shall be stored in the test room (23%→27).50%±13% standard test room for 24h, 4,3.2 Variable temperature tensile test method
Take 1 sample for heating: 2%2 mold tensile test sample net tensile temperature is 1r/mir.--sm/ri. According to the formula (5) in the text, calculate the maximum impact resistance that the sample can withstand per unit length, and according to the formula () in the text, calculate the tensile strength. A3.3 Water immersion test method
3.3.1 Place 20 or H G/G692 standard pieces in grade water (the supply is 23%! 2%!) for 1000 minutes and then take them out. Pass the sample slurry through (A.3.1), and select 1 of the test group for the low temperature and high temperature tensile test. A3.2.2 After the sample is stabilized under the modified test short change (text 5.4.21), it is subjected to tensile test at a speed of 1immm/min-~:mml/rim.
A.3.3.3 The unit length of these samples is calculated by formula (5) in the text. What can be borne on the surface is the human reverse fairy - then according to the formula (4) of the text, the low temperature and internal temperature tensile characteristic values ​​are calculated separately, and the characteristic values ​​obtained by the actual ancestor's pick-up test (A. are compared respectively. n.3.4 Wet heat test method
glue individual sincerity, in the product Hui Tai 90% medicine high humidity (wear the product with the heat material reduction degree Shi Ji injection type product trap heat material humidity is 75℃: the environment is exposed to the benefit of the sample natural state (A.31. Then the room is 23 Shi Man can stand the test, the tensile speed is m/m~5ma/mn, the positive formula (calculate this I test report on the unit length can withstand the maximum net tensile knife, according to the text public (1) calculate the tensile will borrow. And the room temperature horizontal tensile whole, A, 3, 1) slightly get the characteristic valueTable 3
Detailed regulations
Production! Before the establishment of the political. Wanke can use the thermal profile? Sampling of old alloy profiles from above
Inspection of separated villages
Production of products
Strictly check the effectiveness of the tensile test room
Product calibration
Product temperature durability test
Product environmental testing
Product appearance quality
6.6 Inspection results
Sampling 1H.227.-20 or YS:459-2003 Scan the product according to the agreed agreement
(237,12/94 Newton to 13 visual
Guide the whole government to take 2 pieces in each, control the lower part and two moves to take 3 samples, and do hot , the sample book can be divided into 3 parts - respectively "monthly, room, high-tech test, test length 16>mm! 1u.u.. pull test can be selected with the 16mm root, report in the middle to collect 1 sample, south wrong cold mark take 3 anti-stop test, test for marking, street test "parts (each part is divided into low and high tensile test, sample length u:11mm
year batch dare 2 roots, each report in the middle to collect 1 test, two increase respectively take 2 test analysis. Sample length 3cu.u.1mu.
root inspection
inspection age determination results are stipulated in 4
marking, packaging, transportation, storage
7.1 The product of the joint venture is engraved with the following customer labels (or certificates): the seal of the supplier's technical supervision department; the total quality inspection of the aluminum alloy, the wet and hot material inspection of the production, the product cutting inspection, the product design inspection, the product drawing and reduction inspection, the product high quality and durable inspection or the product heat damage inspection, the supply sequence, trademark; the brand and makeup of the profile: 0015 related product quality inspection form, the supply and demand effect and the other Strict whole system inspection, select 4 materials from each delivery position to report production, take one as a group, according to the characteristics of the sample for testing, judge this batch of products does not meet the control quality, when the state medical batch of products does not meet the extension, special value is unqualified, from this batch of products collect double good mother cattle, divide them equally, the group test again, if still qualified: the product size is 100 days
Material name:
Product name, do not make repairs too much sample processing method Production period Batch number:
Local extension number:
Production license number.
Packing, transportation, storage
Production The packaging, transportation and storage of products shall comply with the provisions of /T31. Quality assurance certificate
Product quality certificate:
Supply station name, location, location, and address;
Material type and finish:
Product name, code number
Product name, specifications and surface treatment method:
Product date or number:
Year or number of products:
Product analysis and inspection results printed by the supplier's technical supervision department;
Order form or order form (or contract) for the materials listed in this part. Product name, combination method, category, specification and other presentation methods; Material code:
Insulation material name or code:
) Product coating type, grade, gloss, color and other related requirements; Product density grade:
Product root number:
TR52.37.6—2004
Requirements for product performance such as buckle, shear elasticity, tensile strength, cross-sectional area, heat transfer coefficient, etc.; Special test requirements (aging test); Special packaging method or requirements:
This part number,
CB 5237. 620C4
A.1 Specification
Standard Appendix
Insulation Materials
This appendix specifies the quality requirements, test methods, test results and test results of thermal insulation materials for ceramic thermal insulation profiles:
This appendix is ​​applicable to steel or ceramic composite high-quality alloy building profiles. A.2 Requirements
A.2.1 Thermal insulation materials The results of the longitudinal tensile test, underwater slow test, damp heat test and stress cracking test shall all conform to the specifications of Table A,1. Test items: longitudinal tensile test, underwater slow test, damp heat test, stress cracking test, longitudinal tensile test, longitudinal tensile strength test: 24N/mm2. The test results are compared with the standard tensile characteristic values ​​in the opposite direction. The test results are compared with the standard tensile characteristic values ​​in the opposite direction. The internal tensile characteristic values ​​are lower than the standard tensile characteristic values. No double lines shall appear after 35 months of tightening. 4.2.2 The dimensions, surface pressure, rationality and other performance requirements of the thermal insulation materials shall be agreed upon by the supply and demand parties and specified in the contract:
A.3 Test method
A.3.1 Sample state adjustment
Before the following absorption test, the sample shall be stored in the test room (23%→27).50%±13% standard test room for 24h, 4,3.2 Variable temperature tensile test method
Take 1 sample for heating: 2%2 mold tensile test sample net tensile temperature is 1r/mir.--sm/ri. According to the formula (5) in the text, calculate the maximum impact resistance that the sample can withstand per unit length, and according to the formula () in the text, calculate the tensile strength. A3.3 Water immersion test method
3.3.1 Place 20 or H G/G692 standard pieces in grade water (the supply is 23%! 2%!) for 1000 minutes and then take them out. Pass the sample slurry through (A.3.1), and select 1 of the test group for the low temperature and high temperature tensile test. A3.2.2 After the sample is stabilized under the modified test short change (text 5.4.21), it is subjected to tensile test at a speed of 1immm/min-~:mml/rim.
A.3.3.3 The unit length of these samples is calculated by formula (5) in the text. What can be borne on the surface is the human reverse fairy - then according to the formula (4) of the text, the low temperature and internal temperature tensile characteristic values ​​are calculated separately, and the characteristic values ​​obtained by the actual ancestor's pick-up test (A. are compared respectively. n.3.4 Wet heat test method
glue individual sincerity, in the product Hui Tai 90% medicine high humidity (wear the product with the heat material reduction degree Shi Ji injection type product trap heat material humidity is 75℃: the environment is exposed to the benefit of the sample natural state (A.31. Then the room is 23 Shi Man can stand the test, the tensile speed is m/m~5ma/mn, the positive formula (calculate this I test report on the unit length can withstand the maximum net tensile knife, according to the text public (1) calculate the tensile will borrow. And the room temperature horizontal tensile whole, A, 3, 1) slightly get the characteristic value—234
The supplier’s technical supervision department’s control print;
The correct quality inspection total
Aluminum alloy’s wet
Heat time
Product’s external performance
Product’s leading cutting inspection
Product’s right design inspection
Product’s pulling and reducing inspection
Product’s high-quality durable product or style
Product’s heat damage inspection
Supply order, trademark;
Profile brand and makeup:
:0015Relevant product quality inspection list case
Supply and demand efficiency
Things and resistance, wave batch and other strict production and fast inspection, select each delivery position Take 4 materials from the production report, and take one as the group, and carry out test according to the characteristics of the samples received. If the shape quality of the batch of products does not meet the requirements, and the special value of the batch of products does not meet the requirements, then collect two good products from the batch, and divide them into two groups. If the test is still qualified, the sample station will come to repeat the test. If the sample is still qualified, the product will be qualified.
Material name:
Product name, sample processing method, production period, batch number:
Local extension number:
Production license number.
Packaging, transportation, storage
The packaging, transportation and storage of the products comply with the provisions of /T31. Quality assurance
The product quality certificate shall include:
Supply station name, address, address, and fax;
Material type and make-up style:
Product name, code
Product name, specifications and surface treatment method: Production date or number:
Year or number of products:
All analysis and inspection results shall be printed on the document of the technical supervision department of the supplier;
Order form or order form (or contract) for the materials listed in this part, product name, cooperation method, type tt||Specification, distance and relative expression mode; Material code:
Insulation material name or code:
) Product coating type, grade, gloss, color and other related requirements; Product density grade:
Heavy product root number:
TR52.37.6—2004
Requirements for product performance such as short buckle, shear elasticity, tensile strength, cross-sectional area, heat transfer coefficient, etc.; Special test requirements (aging test); Special packaging method or requirements:
This part number,
CB 5237. 620C4
A.1 Specification
Standard Appendix
Insulation Materials
This appendix specifies the quality requirements, test methods, test results and test results of thermal insulation materials for ceramic thermal insulation profiles:
This appendix is ​​applicable to steel or ceramic composite high-quality alloy building profiles. A.2 Requirements
A.2.1 Thermal insulation materials The results of the longitudinal tensile test, underwater slow test, damp heat test and stress cracking test shall all conform to the specifications of Table A,1. Test items: longitudinal tensile test, underwater slow test, damp heat test, stress cracking test, longitudinal tensile test, longitudinal tensile strength test: 24N/mm2. The test results are compared with the standard tensile characteristic values ​​in the opposite direction. The test results are compared with the standard tensile characteristic values ​​in the opposite direction. The internal tensile characteristic values ​​are lower than the standard tensile characteristic values. No double lines shall appear after 35 months of tightening. 4.2.2 The dimensions, surface pressure, rationality and other performance requirements of the thermal insulation materials shall be agreed upon by the supply and demand parties and specified in the contract:
A.3 Test method
A.3.1 Sample state adjustment
Before the following absorption test, the sample shall be stored in the test room (23%→27).50%±13% standard test room for 24h, 4,3.2 Variable temperature tensile test method
Take 1 sample for heating: 2%2 mold tensile test sample net tensile temperature is 1r/mir.--sm/ri. According to the formula (5) in the text, calculate the maximum impact resistance that the sample can withstand per unit length, and according to the formula () in the text, calculate the tensile strength. A3.3 Water immersion test method
3.3.1 Place 20 or H G/G692 standard pieces in grade water (the supply is 23%! 2%!) for 1000 minutes and then take them out. Pass the sample slurry through (A.3.1), and select 1 of the test group for the low temperature and high temperature tensile test. A3.2.2 After the sample is stabilized under the modified test short change (text 5.4.21), it is subjected to tensile test at a speed of 1immm/min-~:mml/rim.
A.3.3.3 The unit length of these samples is calculated by formula (5) in the text. What can be borne on the surface is the human reverse fairy - then according to the formula (4) of the text, the low temperature and internal temperature tensile characteristic values ​​are calculated separately, and the characteristic values ​​obtained by the actual ancestor's pick-up test (A. are compared respectively. n.3.4 Wet heat test method
glue individual sincerity, in the product Hui Tai 90% medicine high humidity (wear the product with the heat material reduction degree Shi Ji injection type product trap heat material humidity is 75℃: the environment is exposed to the benefit of the sample natural state (A.31. Then the room is 23 Shi Man can stand the test, the tensile speed is m/m~5ma/mn, the positive formula (calculate this I test report on the unit length can withstand the maximum net tensile knife, according to the text public (1) calculate the tensile will borrow. And the room temperature horizontal tensile whole, A, 3, 1) slightly get the characteristic value—234
The supplier’s technical supervision department’s control print;
The correct quality inspection total
Aluminum alloy’s wet
Heat time
Product’s external performance
Product’s leading cutting inspection
Product’s right design inspection
Product’s pulling and reducing inspection
Product’s high-quality durable product or style
Product’s heat damage inspection
Supply order, trademark;
Profile brand and makeup:
:0015Relevant product quality inspection list case
Supply and demand efficiency
Things and resistance, wave batch and other strict production and fast inspection, select each delivery position Take 4 materials from the production report, and take one as the group, and carry out test according to the characteristics of the samples received. If the shape quality of the batch of products does not meet the requirements, and the special value of the batch of products does not meet the requirements, then collect two good products from the batch, and divide them into two groups. If the test is still qualified, the sample station will come to repeat the test. If the sample is still qualified, the product will be qualified.
Material name:
Product name, sample processing method, production period, batch number:
Local extension number:
Production license number.
Packaging, transportation, storage
The packaging, transportation and storage of the products comply with the provisions of /T31. Quality assurance
The product quality certificate shall include:
Supply station name, address, address, and fax;
Material type and make-up style:
Product name, code
Product name, specifications and surface treatment method: Production date or number:
Year or number of products:
All analysis and inspection results shall be printed on the document of the technical supervision department of the supplier;
Order form or order form (or contract) for the materials listed in this part, product name, cooperation method, type tt||Specification, distance and relative expression mode; Material code:
Insulation material name or code:
) Product coating type, grade, gloss, color and other related requirements; Product density grade:
Heavy product root number:
TR52.37.6—2004
Requirements for product performance such as short buckle, shear elasticity, tensile strength, cross-sectional area, heat transfer coefficient, etc.; Special test requirements (aging test); Special packaging method or requirements:
This part number,
CB 5237. 620C4
A.1 Specification
Standard Appendix
Insulation Materials
This appendix specifies the quality requirements, test methods, test results and test results of thermal insulation materials for ceramic thermal insulation profiles:
This appendix is ​​applicable to steel or ceramic composite high-quality alloy building profiles. A.2 Requirements
A.2.1 Thermal insulation materials The results of the longitudinal tensile test, underwater slow test, damp heat test and stress cracking test shall all conform to the specifications of Table A,1. Test items: longitudinal tensile test, underwater slow test, damp heat test, stress cracking test, longitudinal tensile test, longitudinal tensile strength test: 24N/mm2. The test results are compared with the standard tensile characteristic values ​​in the opposite direction. The test results are compared with the standard tensile characteristic values ​​in the opposite direction. The internal tensile characteristic values ​​are lower than the standard tensile characteristic values. No double lines shall appear after 35 months of tightening. 4.2.2 The dimensions, surface pressure, rationality and other performance requirements of the thermal insulation materials shall be agreed upon by the supply and demand parties and specified in the contract:
A.3 Test method
A.3.1 Sample state adjustment
Before the following absorption test, the sample shall be stored in the test room (23%→27).50%±13% standard test room for 24h, 4,3.2 Variable temperature tensile test method
Take 1 sample for heating: 2%2 mold tensile test sample net tensile temperature is 1r/mir.--sm/ri. According to the formula (5) in the text, calculate the maximum impact resistance that the sample can withstand per unit length, and according to the formula () in the text, calculate the tensile strength. A3.3 Water immersion test method
3.3.1 Place 20 or H G/G692 standard pieces in grade water (the supply is 23%! 2%!) for 1000 minutes and then take them out. Pass the sample slurry through (A.3.1), and select 1 of the test group for the low temperature and high temperature tensile test. A3.2.2 After the sample is stabilized under the modified test short change (text 5.4.21), it is subjected to tensile test at a speed of 1immm/min-~:mml/rim.
A.3.3.3 The unit length of these samples is calculated by formula (5) in the text. What can be borne on the surface is the human reverse fairy - then according to the formula (4) of the text, the low temperature and internal temperature tensile characteristic values ​​are calculated separately, and the characteristic values ​​obtained by the actual ancestor's pick-up test (A. are compared respectively. n.3.4 Wet heat test method
glue individual sincerity, in the product Hui Tai 90% medicine high humidity (wear the product with the heat material reduction degree Shi Ji injection type product trap heat material humidity is 75℃: the environment is exposed to the benefit of the sample natural state (A.31. Then the room is 23 Shi Man can stand the test, the tensile speed is m/m~5ma/mn, the positive formula (calculate this I test report on the unit length can withstand the maximum net tensile knife, according to the text public (1) calculate the tensile will borrow. And the room temperature horizontal tensile whole, A, 3, 1) slightly get the characteristic value1. The specification of it,
trial project
air damage tensile test
water treatment test supervision, virtual maturity test
stock property test
apply large opening test supervision
recovery tensile strength special straight 24N/mm
test method to hold in this: 2:K/mr. The test results are compared with the standard tensile characteristic values ​​in the opposite direction. The test results are compared with the standard tensile characteristic values ​​in the opposite direction. The internal tensile characteristic values ​​are lower than the standard tensile characteristic values. No double lines shall appear after 35 months of tightening. 4.2.2 The dimensions, surface pressure, rationality and other performance requirements of the thermal insulation materials shall be agreed upon by the supply and demand parties and specified in the contract:
A.3 Test method
A.3.1 Sample state adjustment
Before the following absorption test, the sample shall be stored in the test room (23%→27).50%±13% standard test room for 24h, 4,3.2 Variable temperature tensile test method
Take 1 sample for heating: 2%2 mold tensile test sample net tensile temperature is 1r/mir.--sm/ri. According to the formula (5) in the text, calculate the maximum impact resistance that the sample can withstand per unit length, and according to the formula () in the text, calculate the tensile strength. A3.3 Water immersion test method
3.3.1 Place 20 or H G/G692 standard pieces in grade water (the supply is 23%! 2%!) for 1000 minutes and then take them out. Pass the sample slurry through (A.3.1), and select 1 of the test group for the low temperature and high temperature tensile test. A3.2.2 After the sample is stabilized under the modified test short change (text 5.4.21), it is subjected to tensile test at a speed of 1immm/min-~:mml/rim.
A.3.3.3 The unit length of these samples is calculated by formula (5) in the text. What can be borne on the surface is the human reverse fairy - then according to the formula (4) of the text, the low temperature and internal temperature tensile characteristic values ​​are calculated separately, and the characteristic values ​​obtained by the actual ancestor's pick-up test (A. are compared respectively. n.3.4 Wet heat test method
glue individual sincerity, in the product Hui Tai 90% medicine high humidity (wear the product with the heat material reduction degree Shi Ji injection type product trap heat material humidity is 75℃: the environment is exposed to the benefit of the sample natural state (A.31. Then the room is 23 Shi Man can stand the test, the tensile speed is m/m~5ma/mn, the positive formula (calculate this I test report on the unit length can withstand the maximum net tensile knife, according to the text public (1) calculate the tensile will borrow. And the room temperature horizontal tensile whole, A, 3, 1) slightly get the characteristic value1. The specification of it,
trial project
air damage tensile test
water treatment test supervision, virtual maturity test
stock property test
apply large opening test supervision
recovery tensile strength special straight 24N/mm
test method to hold in this: 2:K/mr. The test results are compared with the standard tensile characteristic values ​​in the opposite direction. The test results are compared with the standard tensile characteristic values ​​in the opposite direction. The internal tensile characteristic values ​​are lower than the standard tensile characteristic values. No double lines shall appear after 35 months of tightening. 4.2.2 The dimensions, surface pressure, rationality and other performance requirements of the thermal insulation materials shall be agreed upon by the supply and demand parties and specified in the contract:
A.3 Test method
A.3.1 Sample state adjustment
Before the following absorption test, the sample shall be stored in the test room (23%→27).50%±13% standard test room for 24h, 4,3.2 Variable temperature tensile test method
Take 1 sample for heating: 2%2 mold tensile test sample net tensile temperature is 1r/mir.--sm/ri. According to the formula (5) in the text, calculate the maximum impact resistance that the sample can withstand per unit length, and according to the formula () in the text, calculate the tensile strength. A3.3 Water immersion test method
3.3.1 Place 20 or H G/G692 standard pieces in grade water (the supply is 23%! 2%!) for 1000 minutes and then take them out. Pass the sample slurry through (A.3.1), and select 1 of the test group for the low temperature and high temperature tensile test. A3.2.2 After the sample is stabilized under the modified test short change (text 5.4.21), it is subjected to tensile test at a speed of 1immm/min-~:mml/rim.
A.3.3.3 The unit length of these samples is calculated by formula (5) in the text. What can be borne on the surface is the human reverse fairy - then according to the formula (4) of the text, the low temperature and internal temperature tensile characteristic values ​​are calculated separately, and the characteristic values ​​obtained by the actual ancestor's pick-up test (A. are compared respectively. n.3.4 Wet heat test method
glue individual sincerity, in the product Hui Tai 90% medicine high humidity (wear the product with the heat material reduction degree Shi Ji injection type product trap heat material humidity is 75℃: the environment is exposed to the benefit of the sample natural state (A.31. Then the room is 23 Shi Man can stand the test, the tensile speed is m/m~5ma/mn, the positive formula (calculate this I test report on the unit length can withstand the maximum net tensile knife, according to the text public (1) calculate the tensile will borrow. And the room temperature horizontal tensile whole, A, 3, 1) slightly get the characteristic value
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.