QB/T 1597-1992 Single-page teletypewriting base paper

This standard specifies the product classification, technical requirements, test methods, inspection rules and marking, packaging, transportation and storage of single-page teletype base paper. This standard applies to base paper used for typing on teletype machines. QB/T 1597-1992 Single-page teletype base paper QB/T1597-1992 Standard download decompression password: www.bzxz.net

Light Industry Standard of the People's Republic of China
Single-page teletype base paper
1 Subject content and scope of application
QB/T 1597—1992
This standard specifies the product classification, technical requirements, test methods, inspection rules and marking, packaging, transportation and storage of single-page teletype base paper.
This standard applies to base paper used for typing on teletypewriters. 2 Reference standards
GB/T450 Paper and paperboard sampling
GB/T451.1 Determination of size and deflection of paper and paperboardGB/T451.2 Determination of basis weight of paper and paperboardGB/T451.3 Determination of thickness of paper and paperboardGB/T453 Determination of tensile strength of paper and paperboard (constant rate loading method)GB/T 456
GB/T 460
GB/T462
GB/T 463
Determination of smoothness of paper and paperboard (Buick method)Determination of sizing degree of paper and paperboard (ink streaking method)Determination of moisture content of paper and paperboard
Determination of ash content of paper and paperboardbZxz.net
GB/T 1541
Determination of dustiness of paper and paperboard
Batch inspection counting sampling procedure and sampling table (applicable to inspection of continuous batches) GB/T 2828
GB/T 8940.1
GB/T 10342
GB/T 10739
3Product classification
Determination of whiteness of paper and paperboard 45/0 directional reflection method Packaging and marking of paper
Standard atmosphere for handling and testing of pulp, paper and paperboard samples Single-page teletype base paper is divided into three grades: A, B and C. 3.1
Single-page teletype base paper is roll paper. 3.3 The roll diameter is (850 ± 50) mm, and the paper roll width is 850, 640 mm, or as specified in the order contract. 4 Technical requirements and test methods
The technical indicators and test methods of single-page teletype base paper must comply with the provisions of Table 1. 4.11
The width error of the paper roll shall not exceed ±3mm. Measure according to GB/T451.1. 4.2
4.3 The two sides of the paper roll shall be consistent in tightness, the cutting edges shall be neat and clean, and no mechanical damage is allowed. 4.4 The cut surface shall be flat, and there shall be no folds, wrinkles, holes, cracks, hard blocks, holes, various spots and other paper defects that affect the use. 4.5 There shall be no shredded paper or impurities in the paper roll. 4.6 The number of broken ends of grade A products shall not exceed 4, and the number of broken ends of grade B and C products shall not exceed 6. 4.7 The color tone of each batch of paper shall be consistent and there shall be no obvious difference. Approved by the Ministry of Light Industry of the People's Republic of China on November 10, 1992 282
Implementation on July 1, 1993
Indicator name
Longitudinal tensile strength
Gluing degree
Smoothness Front
Dust degree
0.2～1. 0mm2
Greater than 1.0mm2 Black dust
Delivery moisture
5 Inspection rules
Not less than
Not less than
Not less than
Not less than
Not greater than
Not more than
QB/T1597-1992
Pieces/m2
The quantity delivered at one time is considered as a batch, but not more than 30t. Grade A
Not allowed
5.2 The manufacturer shall ensure that the paper produced meets the requirements of this standard, and each roll of paper shall be delivered with a certificate of conformity. 5.3 The sampling inspection for delivery inspection shall be carried out in accordance with the provisions of GB/T2828, and the sample unit is the roll. Test method
GB/T 451. 2
GB/T 451.3
GB/T 8940. 1
GB/T 453
GB/T460
GB/T456
GB/T 463
GB/T 1541
GB/T 462
5.4 The sampling of samples and pre-test treatment shall be carried out in accordance with the provisions of GB/T450 and GB/T10739. 5.5 According to the normal inspection secondary sampling plan, sampling is carried out at the general inspection level 1. The grouping of the delivery inspection items and the qualified quality level (AQL) are as specified in Table 2.
Sampling plan
91~280
281~500
Normal inspection secondary sampling plan
Inspection level 1
Class B nonconforming products
Sample size
13(26)
AQL= 4. 0
Class C nonconforming products
AQL = 6. 5
Classification of nonconformity
Nonconformity
Longitudinal tensile strength
Nonconformity
Smoothness
Appearance paper defects
5.6 The purchaser has the right to check whether the quality of the batch of products meets the requirements of this standard. If the purchaser has any objection to the quality of the products, it shall notify the supplier within three months after the arrival of the goods to jointly take samples for re-inspection. If it does not meet the requirements of this standard, the batch of products shall be judged as nonconformity and the supplier shall be responsible for handling it. If it meets the requirements of this standard, the batch of products shall be judged as qualified and the purchaser shall be responsible for handling it. 283
6 Marking, packaging, transportation, storage
QB/T 1597---1992
6.1 The packaging and marking of single-page teletypewriting base paper shall be carried out in accordance with the provisions of GB/T10342 or the requirements of the order contract. 6.2 When transporting the product, it must be transported in rainproof, moisture-proof and clean means of transport. It is strictly forbidden to mix with damp and perishable items. 6.3 The product must be stored to prevent rain, snow and moisture. The warehouse must have dry ventilation performance. The packaging must be complete to prevent the product from getting damp. 6.4 When transporting, it is not allowed to throw the product down from a high place or roll it on the spot. Additional instructions:
This standard was proposed by the Paper Industry Department of the Ministry of Light Industry. This standard is under the jurisdiction of the National Paper Standardization Center. This standard was drafted by Shanghai Lihua Paper Mill. The main drafters of this standard are Zhang Shoubao, Zhu Cuihe and Jiang Liyan. From the date of implementation of this standard, the former Ministry of Light Industry standard QB610-1973 "Single-page teletype base paper" will be invalid. This standard adopts the Soviet standard "OCT19625-1974 "Telegraphic tape and telegraphic tape paper" with reference to the Soviet standard. 284
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.