JB/T 8004.9-1999 Machine tool fixture parts and components Swivel handle nuts
time:
1999-08-06 15:00:00
- JB/T 8004.9-1999
- in force
Standard ID:
JB/T 8004.9-1999
Standard Name:
Machine tool fixture parts and components Swivel handle nuts
Chinese Name:
机床夹具零件及部件 回转手柄螺母
Standard category:
Machinery Industry Standard (JB)
-
Date of Release:
1999-08-06 -
Date of Implementation:
2000-01-01
Standard ICS number:
General, Terminology, Standardization, Documentation>>Vocabulary>>01.040.29 Electrical Engineering (Vocabulary)China Standard Classification Number:
Machinery>>Process Equipment>>J44 General Fixture
alternative situation:
JB/T 8004.9-1995 (original standard number GB/T 2156-1991)
Description (Translated English) / downloadSkip to download
Summary:
JB/T 8004.9-1999 JB/T 8004.9-1999 Machine tool fixture parts and components Swivel handle nut JB/T8004.9-1999 Standard download decompression password: www.bzxz.net
Standard contentSome standard content:
ICS 25. 080. 01
Machinery Industry Standard of the People's Republic of China
The parts and units of jigs and fixturesbzxz.net
The parts and units of jigs and fixtures1999-08-06 Issued
State Machinery Industry Bureau
2000-01-01 Implementation
Machinery Industry Standard of the People's Republic of China
Parts and units of jigs and fixturesRotary handle nut
This standard specifies the rotary handle nut with thread specifications of M8-M20. 2 Dimensions
The dimensions are shown in the following figure and table.
3 Marking
3.1 Marking example:
d-M10 rotary handle nut:
Handle nut M10JB/T8004.9—1999
Approved by the State Machinery Industry Bureau on August 6, 1999L
JB/T 8004.91999
Replaced JB/T8004.9—1995
Implemented on January 1, 2000
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
Machinery Industry Standard of the People's Republic of China
The parts and units of jigs and fixturesbzxz.net
The parts and units of jigs and fixtures1999-08-06 Issued
State Machinery Industry Bureau
2000-01-01 Implementation
Machinery Industry Standard of the People's Republic of China
Parts and units of jigs and fixturesRotary handle nut
This standard specifies the rotary handle nut with thread specifications of M8-M20. 2 Dimensions
The dimensions are shown in the following figure and table.
3 Marking
3.1 Marking example:
d-M10 rotary handle nut:
Handle nut M10JB/T8004.9—1999
Approved by the State Machinery Industry Bureau on August 6, 1999L
JB/T 8004.91999
Replaced JB/T8004.9—1995
Implemented on January 1, 2000
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
- Recommended standards
- NY/T 665-2003 Specification for the evaluation of micro hydroelectric equipment
- NY/T 5092-2002 Technical specification for the production of pollution-free food celery
- GB/T 3566-1993 Bicycle assembly requirements
- SY/T 0069-2000 Technical Specification for Crude Oil Stabilization Design
- GB/T 13346-1992 Metallic coatings－Electroplated coatings of cadmium on iron and steel
- GB 9103-1988 Industrial stearic acid
- SY 0049-1994 Oilfield surface construction planning and design specifications
- GB/T 4797.5-1992 Natural environmental conditions for electrical and electronic products: precipitation and wind
- GB/T 3780.7-1996 Determination of pH value of carbon black
- SY 4030.1-1993 Petroleum Construction Engineering Quality Inspection and Assessment Standard Electrical Engineering (Overhead Power Line Engineering)
- HG/T 2606-1994 Rubber single screw extruder product quality classification and inspection details
- GB 10092-1988 Multiple comparison for test results
- GB/T 39223.3-2020 Ergonomic requirements for healthy home—Part 3:Office desks and chairs
- JB/T 8008.4-1999 Machine tool fixture parts and components rotating washers
- SJ 2803-1987 Method for determination of trace carbon dioxide in electronic grade gases-Pre-cut hydrogen flame ionzation detector method
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail：bzxznet@163.com