
GB/T 5499-1985 Inspection of grains and oilseeds - Inspection method for pure kernel rate of shelled oilseeds
time:
2024-08-04 16:28:11
- GB/T 5499-1985
- Abolished
Standard ID:
GB/T 5499-1985
Standard Name:
Inspection of grains and oilseeds - Inspection method for pure kernel rate of shelled oilseeds
Chinese Name:
粮食、油料检验 带壳油料纯仁率检验法
Standard category:
National Standard (GB)
-
Date of Release:
1985-01-01 -
Date of Implementation:
1986-07-01 -
Date of Expiration:
2008-11-01
Standard ICS number:
Food Technology >> 67.040 Food ComprehensiveChina Standard Classification Number:
Food>>Food Processing and Products>>X10 Food Processing and Products Comprehensive
alternative situation:
Replaced by GB/T 5499-2008
Release date:
1985-11-02Review date:
2004-10-14Drafting Organization:
Grain Storage and Transportation Bureau, Ministry of CommerceFocal point Organization:
National Technical Committee on Grain and Oil StandardizationPublishing Department:
State Grain AdministrationCompetent Authority:
State Grain Administration

Skip to download
Summary:
GB/T 5499-1985 Grain and oilseed inspection - Method for testing the pure kernel rate of shelled oilseeds GB/T5499-1985 standard download decompression password: www.bzxz.net

Some standard content:
National Standard of the People's Republic of China
Inspection of grain and oilseedsGB/T5499-85
Methods for determination of purekernel yield of unhulled oilseedsThis standard applies to the inspection of purekernel yield of commercial oilseeds (with shells). Instruments and appliances
1.1Tray balance: sensitivity 0.1g;
1.2Analysis plate;
1.3Surface blood, tweezers, etc.
2Amount of sample
Net sample (excluding impurities and kernels): 200g for peanuts, tea seeds, and tung seeds; 20g for sunflower seeds and cotton seeds. 3Shelling
Shell peanuts by hand; shell tea seeds and tung seeds after breaking the shell; shell sunflower seeds by pressing with tweezers or by hand; shell cotton seeds by scissors and tweezers. Do not lose kernels when shelling. 4 Operation method
Weigh the sample (W) according to the specified amount. After shelling, remove the kernels that have no use value, weigh the total weight of the kernels (W1), and then remove the imperfect kernels according to the regulations and weigh them (W2). 5 Result calculation
The total amount of kernels and the pure kernel rate are calculated according to formulas (1) and (2): Wi
Total amount of kernels (%)=
-×100
W1-W2-2
Pure kernel rate (%)=
Total weight of kernels, g;
Imperfect kernel weight, g;
-net sample weight, g.
× 100
The allowable difference between the two test results shall not exceed 1.0%. The average is the test result. The test result is rounded to the first decimal place.
Additional Notes: bZxz.net
This standard was proposed by the Ministry of Commerce of the People's Republic of China. This standard was drafted by the Grain Storage and Transportation Bureau of the Ministry of Commerce. The main drafters of this standard were Gao Xiuwu, Yang Haoran, Wu Yanxia, and Lv Guifen. Issued by the National Bureau of Standards on November 2, 1985
Implemented on July 1, 1986
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
Inspection of grain and oilseedsGB/T5499-85
Methods for determination of purekernel yield of unhulled oilseedsThis standard applies to the inspection of purekernel yield of commercial oilseeds (with shells). Instruments and appliances
1.1Tray balance: sensitivity 0.1g;
1.2Analysis plate;
1.3Surface blood, tweezers, etc.
2Amount of sample
Net sample (excluding impurities and kernels): 200g for peanuts, tea seeds, and tung seeds; 20g for sunflower seeds and cotton seeds. 3Shelling
Shell peanuts by hand; shell tea seeds and tung seeds after breaking the shell; shell sunflower seeds by pressing with tweezers or by hand; shell cotton seeds by scissors and tweezers. Do not lose kernels when shelling. 4 Operation method
Weigh the sample (W) according to the specified amount. After shelling, remove the kernels that have no use value, weigh the total weight of the kernels (W1), and then remove the imperfect kernels according to the regulations and weigh them (W2). 5 Result calculation
The total amount of kernels and the pure kernel rate are calculated according to formulas (1) and (2): Wi
Total amount of kernels (%)=
-×100
W1-W2-2
Pure kernel rate (%)=
Total weight of kernels, g;
Imperfect kernel weight, g;
-net sample weight, g.
× 100
The allowable difference between the two test results shall not exceed 1.0%. The average is the test result. The test result is rounded to the first decimal place.
Additional Notes: bZxz.net
This standard was proposed by the Ministry of Commerce of the People's Republic of China. This standard was drafted by the Grain Storage and Transportation Bureau of the Ministry of Commerce. The main drafters of this standard were Gao Xiuwu, Yang Haoran, Wu Yanxia, and Lv Guifen. Issued by the National Bureau of Standards on November 2, 1985
Implemented on July 1, 1986
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
- Recommended standards
- GB/T 18681-2002 Thermal spraying-Low pressure plasma spraying Ni-CO-Cr-Al-Y-Ta alloy coating
- GB 4543-1991 Orange smoke signal for life-saving
- HG 3076-1988 Rubber Products Miscellaneous Terminology
- SY/T 0075-2002 Specification for design of fire dikes in oil tank areas
- QB/T 1707-1993 Waxed base paper
- GB/T 2820.9-2002 Reciprocating internal combustion engine driven alternating current generating sets Part 9: Measurement and evaluation of mechanical vibration
- GB/T 3478.1-1995 Basic profile tolerances for cylindrical spur involute splines
- JB/T 8602-1997 Vertical tapping machine accuracy inspection
- QB/T 1583-2005 Leather gloves sizes
- GB 2701-1987 Test methods for jute yarn and thread
- CB/T 3625-1994 Quality requirements for centering and boring of rudder and shafting
- GB 19434.5-2004 Safety specification for inspection of metal intermediate bulk containers for dangerous goods Performance inspection
- GB/T 5687.2-1985 Chemical analysis methods for ferrochromium - Gravimetric method for determination of silicon content
- GB17269-2003 Safety regulations for dust explosion prevention during aluminum and magnesium powder processing
- GB/T 5719-1995 Terminology of rubber sealing products
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail:bzxznet@163.com