
GB 16916.21-1997 Residual current operated circuit breakers (RCCB) for household and similar purposes without overcurrent protection Part 2.1: Applicability of general rules to RCCBs whose operating function is independent of line voltage
time:
2024-08-06 03:45:24
- GB 16916.21-1997
- Abolished
Standard ID:
GB 16916.21-1997
Standard Name:
Residual current operated circuit breakers (RCCB) for household and similar purposes without overcurrent protection Part 2.1: Applicability of general rules to RCCBs whose operating function is independent of line voltage
Chinese Name:
家用和类似用途的不带过电流保护的剩余电流动作断路器(RCCB) 第2.1部分:一般规则对动作功能与线路电压无关的RCCB的适用性
Standard category:
National Standard (GB)
-
Date of Release:
1997-06-28 -
Date of Implementation:
1998-09-01 -
Date of Expiration:
2009-06-01
Standard ICS number:
Electrical Engineering>>Electrical Devices>>29.120.50 Fuses and other overload protectionChina Standard Classification Number:
Electrical Engineering>>Low Voltage Electrical Appliances>>K31 Low Voltage Distribution Appliances
alternative situation:
Replaced by GB 16916.21-2008Procurement status:
IDT IEC 1008-2-1:1990
publishing house:
China Standards PressISBN:
155066.1-14635Publication date:
2004-04-11
Release date:
1997-06-28Review date:
2004-10-14Drafter:
Zhou Jigang, Sun Zhu, Zhou Hailin, Lü YinghuaDrafting Organization:
Shanghai Electric Science Research Institute, Ministry of Machinery IndustryFocal point Organization:
National Technical Committee for Low Voltage Electrical Appliance StandardizationProposing Organization:
Ministry of Machinery Industry of the People's Republic of ChinaPublishing Department:
State Bureau of Technical SupervisionCompetent Authority:
China Electrical Equipment Industry Association

Skip to download
Summary:
This standard applies to residual current operated circuit breakers (RCCB) without overcurrent protection for household and similar purposes with an AC rated voltage not exceeding 440V and a rated current not exceeding 125A, whose operating function is independent of the line voltage and is mainly used for protection against electric shock. GB 16916.21-1997 Residual current operated circuit breakers (RCCB) without overcurrent protection for household and similar purposes Part 2.1: Applicability of general rules to RCCBs whose operating function is independent of the line voltage GB16916.21-1997 Standard download decompression password: www.bzxz.net

Some standard content:
GB16916.21—1997
This standard is equivalent to IEC1008-2-1:1990 "Residual current operated circuit breakers (RCCB) for household and similar purposes without overcurrent protection Part 2-1: Applicability of general rules to RCCH whose operating function is independent of line voltage". By adopting the IEC standard, the standards of residual current operated circuit breakers for household and similar purposes without overcurrent protection in my country are consistent with international standards to meet the needs of international trade, technical and economic exchanges. This standard must be used together with GB16916.1 "Residual current operated circuit breakers (RCCB) for household and similar purposes without overcurrent protection Part 1 t General rules". This standard was proposed by the Ministry of Machinery Industry of the People's Republic of China. This standard is under the jurisdiction of the National Technical Committee for Standardization of Low Voltage Electrical Appliances. This standard was drafted by the Shanghai Electric Science Research Institute of the Ministry of Machinery Industry. The main drafters of this standard are Zhou Jigang, Sun Zhu, Zhou Hailin and Lv Yinghua. GB16916.21—1997
IEC Foreword
1) The final resolutions or agreements on technical issues prepared by the technical committees in which all national committees with special concerns participate express the international consensus on the issues involved as much as possible. 2) These resolutions and agreements are provided for international use in the form of recommendations and are recognized by national committees in this sense. 3) In order to promote international unification, IEC hopes that all national committees, where domestic conditions permit, should adopt IEC recommendations as their national standards. Any discrepancies between IEC recommendations and corresponding national standards shall be resolved in accordance with the relevant provisions of the IEC. This standard was prepared by IEC Technical Committee 23, Electrical Accessories, Subcommittee 23E, Household Circuit Breakers and Similar Apparatus. The text of this standard is based on the following documents: June 2006
23E(CO)62
23E(CO)63
23E(CO)64
23F(CO)68
23F(CO)96
Voting Report
23E(CO)76
23E(CO)77
23F( Detailed information on the voting for this standard can be obtained from the voting report listed in the table above. Voting Report
23E(CO)78
23F(CO)85
23E(CO)117
June Law
23F(CO)79
23E(CO)80
23F(C)81
23E(CO)82
23E(CO)83
23E(CO)84
23E(CO)98
23F(CO)89
Detailed information on the voting for this standard can be obtained from the voting report listed in the table above. Voting Report
23E( CO)100
23E(CO)101
23E(CO)102
23E(C0)103
23F(C0)104
23E(CO)105
23F(CO)1G9
23E(CO)111
National Standard of the People's Republic of China
Residual current operated circuit breakers (RCCB) for household and similar purposes without overcurrent protection
Part 2.1: Applicability of general rules to RCCBs whose operating function is independent of the line voltage 16916.21-1997
idt 1EC 1008-2-1:1990
Residual current operated circuit-breakers without integral overturrent protection for household and similar uses (RCCB)Part 2. 1:Applicability of the generic rules to RCCBfunctionally independent of line yoltage Part 21 of GB 16916 supplements or modifies the corresponding clauses of GB 16916.1 to apply to RCCBs whose operating function is independent of line voltage.
1 Scope of application
This clause of Part 1 is applicable except for the following amendments: The first paragraph is replaced by the following;
This standard applies to residual current operated circuit-breakers (RCCBs) without integral overturrent protection for household and similar uses, whose operating function is independent of line voltage and whose rated voltage does not exceed 440 V AC and whose rated current does not exceed 125 A for main use and protection against electric shock, and whose operating function is independent of line voltage. 2 Referenced standards
This clause of Part 1 applies.
3 Definitions
Except 3.3.5, 3.4.10, 3.4.10.1 and 3.4.10.2 of Part 1, all other clauses apply. 4 Classification
Except 4.1.2, this clause of Part 1 applies. 5 Characteristics of RCBO
Except the last two lines of 5.1, this clause of Part 1 applies. 6 Marking and other product data
Except item n), this clause of Part 1 applies. Approved by the State Administration of Technical Supervision on June 28, 1997 and implemented on September 1, 1998
7 Standard conditions for use and installation
This clause of Part 1 applies.
8 Construction and operational requirements
GB 16916.211997www.bzxz.net
This clause of Part 1 applies, except that 8.12 does not apply. 9 Tests
This clause of Part 1 applies, except that the following provisions apply. In Table 7 of 9.1.1, the 15th dash (for the test of 9.17) does not apply. Note 3 to 9.7.4 does not apply.
9.9.5 does not apply.
The last two paragraphs of 9.11.2.1a) and the last paragraph of 1) do not apply. 9.17 does not apply.
The last paragraphs of 9.18.1 and 9.18.2 do not apply. Figures
The figures of Part 1 apply.
Except that clause 9.17 Conditions in case of line voltage fault (test sequence D,) in Table AI of Appendix A does not apply and the last two symbols in Appendix IB do not apply, the other contents of the appendix to Part 1 are applicable.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
This standard is equivalent to IEC1008-2-1:1990 "Residual current operated circuit breakers (RCCB) for household and similar purposes without overcurrent protection Part 2-1: Applicability of general rules to RCCH whose operating function is independent of line voltage". By adopting the IEC standard, the standards of residual current operated circuit breakers for household and similar purposes without overcurrent protection in my country are consistent with international standards to meet the needs of international trade, technical and economic exchanges. This standard must be used together with GB16916.1 "Residual current operated circuit breakers (RCCB) for household and similar purposes without overcurrent protection Part 1 t General rules". This standard was proposed by the Ministry of Machinery Industry of the People's Republic of China. This standard is under the jurisdiction of the National Technical Committee for Standardization of Low Voltage Electrical Appliances. This standard was drafted by the Shanghai Electric Science Research Institute of the Ministry of Machinery Industry. The main drafters of this standard are Zhou Jigang, Sun Zhu, Zhou Hailin and Lv Yinghua. GB16916.21—1997
IEC Foreword
1) The final resolutions or agreements on technical issues prepared by the technical committees in which all national committees with special concerns participate express the international consensus on the issues involved as much as possible. 2) These resolutions and agreements are provided for international use in the form of recommendations and are recognized by national committees in this sense. 3) In order to promote international unification, IEC hopes that all national committees, where domestic conditions permit, should adopt IEC recommendations as their national standards. Any discrepancies between IEC recommendations and corresponding national standards shall be resolved in accordance with the relevant provisions of the IEC. This standard was prepared by IEC Technical Committee 23, Electrical Accessories, Subcommittee 23E, Household Circuit Breakers and Similar Apparatus. The text of this standard is based on the following documents: June 2006
23E(CO)62
23E(CO)63
23E(CO)64
23F(CO)68
23F(CO)96
Voting Report
23E(CO)76
23E(CO)77
23F( Detailed information on the voting for this standard can be obtained from the voting report listed in the table above. Voting Report
23E(CO)78
23F(CO)85
23E(CO)117
June Law
23F(CO)79
23E(CO)80
23F(C)81
23E(CO)82
23E(CO)83
23E(CO)84
23E(CO)98
23F(CO)89
Detailed information on the voting for this standard can be obtained from the voting report listed in the table above. Voting Report
23E( CO)100
23E(CO)101
23E(CO)102
23E(C0)103
23F(C0)104
23E(CO)105
23F(CO)1G9
23E(CO)111
National Standard of the People's Republic of China
Residual current operated circuit breakers (RCCB) for household and similar purposes without overcurrent protection
Part 2.1: Applicability of general rules to RCCBs whose operating function is independent of the line voltage 16916.21-1997
idt 1EC 1008-2-1:1990
Residual current operated circuit-breakers without integral overturrent protection for household and similar uses (RCCB)Part 2. 1:Applicability of the generic rules to RCCBfunctionally independent of line yoltage Part 21 of GB 16916 supplements or modifies the corresponding clauses of GB 16916.1 to apply to RCCBs whose operating function is independent of line voltage.
1 Scope of application
This clause of Part 1 is applicable except for the following amendments: The first paragraph is replaced by the following;
This standard applies to residual current operated circuit-breakers (RCCBs) without integral overturrent protection for household and similar uses, whose operating function is independent of line voltage and whose rated voltage does not exceed 440 V AC and whose rated current does not exceed 125 A for main use and protection against electric shock, and whose operating function is independent of line voltage. 2 Referenced standards
This clause of Part 1 applies.
3 Definitions
Except 3.3.5, 3.4.10, 3.4.10.1 and 3.4.10.2 of Part 1, all other clauses apply. 4 Classification
Except 4.1.2, this clause of Part 1 applies. 5 Characteristics of RCBO
Except the last two lines of 5.1, this clause of Part 1 applies. 6 Marking and other product data
Except item n), this clause of Part 1 applies. Approved by the State Administration of Technical Supervision on June 28, 1997 and implemented on September 1, 1998
7 Standard conditions for use and installation
This clause of Part 1 applies.
8 Construction and operational requirements
GB 16916.211997www.bzxz.net
This clause of Part 1 applies, except that 8.12 does not apply. 9 Tests
This clause of Part 1 applies, except that the following provisions apply. In Table 7 of 9.1.1, the 15th dash (for the test of 9.17) does not apply. Note 3 to 9.7.4 does not apply.
9.9.5 does not apply.
The last two paragraphs of 9.11.2.1a) and the last paragraph of 1) do not apply. 9.17 does not apply.
The last paragraphs of 9.18.1 and 9.18.2 do not apply. Figures
The figures of Part 1 apply.
Except that clause 9.17 Conditions in case of line voltage fault (test sequence D,) in Table AI of Appendix A does not apply and the last two symbols in Appendix IB do not apply, the other contents of the appendix to Part 1 are applicable.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
- Recommended standards
- GB/T 5048-1999 Moistureproof packaging
- YB/T 178.6-2000 Chemical analysis methods for silicon-aluminium alloys and silicon-barium-aluminium alloys - Determination of carbon content by infrared absorption method
- JB/T 7704.3-1995 Electroplating solution test method cathode current efficiency test
- GB/T 15464-1995 仪器仪表包装通用技术条件
- SY/T 4094-1995 Technical specification for the design and construction of shallow-water steel fixed platform structures
- HG/T 3139.1-2001 Types and basic parameters of vertical reducers for kettles
- GB/T 2900.28-1994 Electrical terminology - Electric tools
- GB/T 2884.9-1996 Yangtze River Sectional Barge Model Standard Series--Yangtze River 100-ton Sectional Barge Model Standard
- JB/T 2098-1999 Single-arm hydraulic press types and basic parameters
- JB/T 9890-1999 Accuracy test of multi-station movable worktable of modular machine tool
- QX/T 506-2019 Specifications for climatic feasibility demonstration—Institution credit evaluation
- GB/T 16273.1-1996 Graphical symbols for use on equipment—Common symbols
- HG 20557.1-1993 Scope of responsibilities of process system specialty and tasks in the engineering design phase
- GB/T 17458-1998 Ductile iron pipes--Centrifugal cement mortar lining--Composition controls of freshly applied mortar
- JB/T 7858-1995 Hydraulic component cleanliness assessment method and hydraulic component cleanliness index
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail:bzxznet@163.com