- Location:
- Standard Download >>
- National Standard (GB) >>
- GB/T 15510-1995 控制用电磁继电器可靠性试验通则
GB/T 15510-1995 控制用电磁继电器可靠性试验通则
time:
2024-08-08 19:23:54
- GB/T 15510-1995
- Abolished
Standard ID:
GB/T 15510-1995
Standard Name:
控制用电磁继电器可靠性试验通则
Chinese Name:
控制用电磁继电器可靠性试验通则
Standard category:
National Standard (GB)
-
Date of Release:
1995-03-16 -
Date of Implementation:
1995-01-02 -
Date of Expiration:
2009-03-01
Standard ICS number:
电气工程>>电工器件>>29.120.70继电器China Standard Classification Number:
电工>>低压电器>>K33控制继电器
alternative situation:
被GB/T 15510-2008代替
Release date:
1995-03-16Review date:
2004-10-14Drafter:
陆俭国、胡必权、刘炳彰、刘元洪、韩天行、曾小玲、李志刚、万家彬、李奎、朱云祥Drafting Organization:
机械部北京电工综合经济研究所、河北工学院Focal point Organization:
全国量度继电器和保护设备标准化技术委员会Proposing Organization:
中华人民共和国机械工业部Publishing Department:
国家技术监督局Competent Authority:
中国电器工业协会
Skip to download
Summary:
本标准规定了控制用电磁继电器进行可靠性验证试验的一般要求。本标准适用于产品寿命能合理地认为是服从指数分布的产品的可靠性验证试验,除验证试验方案及试验程序外,本标准也适用于产品的可靠性测定试验。 GB/T 15510-1995 控制用电磁继电器可靠性试验通则 GB/T15510-1995 标准下载解压密码:www.bzxz.net
- Recommended standards
- JB/T 9191-1999 Technical requirements for plasma spray welding guns
- GB/Z 20649-2006 Electronic imaging - Recommendations for the management of electronic recording systems for the recording of documents that may be required as evidence on WORM optical disk
- GB 19079.10-2005 Opening conditions and technical requirements for sports venues Part 10: Diving venues
- JB/T 5242-1991 Test specifications for slewing mechanisms of truck cranes and tire cranes
- JB/T 2901-1992 Technical requirements for rust prevention of steam turbines
- GB 20580-2006 Safety rules for classification、precautionary labelling and precautionary statements of chemicals - Gases under pressure
- JB/T 9712-2001 Technical requirements for casting of torque converter impeller
- HJ/T 204-2005 Technical requirement for environmental labeling products Fibrous desiccant for packaging
- GB/T 15062-1994 General purpose high temperature alloy tubes
- GB/T 5568-1994 Rubber and plastic hoses and hose assemblies - Hydraulic impulse test without flexure
- JB/T 8824.6-1998 Unified thread rolling plate
- GBZ 2-2002 Occupational exposure limits for hazardous factors in the workplace
- SY/T 5027-1993 Basic parameters of pneumatic components for oil drilling equipment
- GB/T 5009.49-2003 Analytical methods for hygienic standards of fermented wine
- SY/T 6514-2001 Preparation for hot work on tank bottom
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail:bzxznet@163.com