JB/T 1002-1977 Sealing gasket
time:
2024-07-15 07:12:06
- JB/T 1002-1977
- in force
Standard ID:
JB/T 1002-1977
Standard Name:
Sealing gasket
Chinese Name:
密封垫圈
Standard category:
Machinery Industry Standard (JB)
-
Date of Release:
1977-01-17 -
Date of Implementation:
1977-05-01
China Standard Classification Number:
Machinery>>General Parts>>J15 Pipe Accessories
alternative situation:
JB 1002-1967; replaced by JB/T 966-2005
Description (Translated English) / downloadSkip to download
Summary:
JB/T 1002-1977 Sealing Gasket JB/T1002-1977 Standard Download Decompression Password: www.bzxz.net
Standard contentSome standard content:
Standard of the First Machinery Industry Department of the People's Republic of China
Sealing Gasket
JB1002-77
Replaces JB1002-67
This standard only specifies gaskets for welding, ferrule, flared pipe joints and screw plugs. D
Marking example:
2·0-H
Size: Sealing gasket with inner diameter of 27.2mm, outer diameter of 31.9mm and thickness of 2mm: Gasket 27JB1002--77
Issued by the First Machine Industry Ministry of the People's Republic of China
Standardization Institute of the First Machine Industry Ministry
Other√3
Implemented on May 1, 1977
Jinan Foundry and Forging Machinery Research Institute, etc.
Nominal diameter
JB1002-77
Technical conditions shall be in accordance with the provisions of JB1003-77. H
Allowable eccentricity
On the bolt
Total 2 pages Page 2
In the screw hole
M12×1.25
M27×2
M33×2
M42×2bzxz.net
M48×2
M60×2
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
Sealing Gasket
JB1002-77
Replaces JB1002-67
This standard only specifies gaskets for welding, ferrule, flared pipe joints and screw plugs. D
Marking example:
2·0-H
Size: Sealing gasket with inner diameter of 27.2mm, outer diameter of 31.9mm and thickness of 2mm: Gasket 27JB1002--77
Issued by the First Machine Industry Ministry of the People's Republic of China
Standardization Institute of the First Machine Industry Ministry
Other√3
Implemented on May 1, 1977
Jinan Foundry and Forging Machinery Research Institute, etc.
Nominal diameter
JB1002-77
Technical conditions shall be in accordance with the provisions of JB1003-77. H
Allowable eccentricity
On the bolt
Total 2 pages Page 2
In the screw hole
M12×1.25
M27×2
M33×2
M42×2bzxz.net
M48×2
M60×2
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
- Recommended standards
- GB 8817-2001 Food additive caramel color (ammonium sulfite method, ammonia method, common method)
- JB/T 8937-1999 Wafer type check valve
- NY 5175-2002 Pollution-free food longan
- JB/T 8014.2-1999 Fixed locating pins for machine tool fixture parts and components
- GB/Z 18729-2002 Network-based enterprise information integration specification
- GB 50261-1996 Automatic sprinkler fire extinguishing system construction and acceptance specification GB50261-96
- HG/T 3124-1998 Technical requirements for mechanical seals for welded metal bellows reactors
- GB 2946-1992 Ammonium chloride
- GB/T 3309-1989 Mechanical tests for high voltage switchgear at room temperature
- GB 8939-1999 Sanitary napkins (including sanitary pads)
- GB 5894-1986 Mechanical seal terminology
- GB/T 8937-1988 Edible lard
- GB/T 2887-2000 General specification for computer sites
- JB/T 5688.2-1991 Peanut shelling machine test method
- GB/T 5009.4-2003 Determination of ash in foods
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail：bzxznet@163.com