HG/T 2562-1994 Dispersant N

Original standard number GB 9295-88 HG/T 2562-1994 Dispersant N HG/T2562-1994 Standard download decompression password: www.bzxz.net

Chemical Industry Standard of the People's Republic of China
HG/T2562-94
Dispersants
Published on February 9, 1994
Ministry of Chemical Industry of the People's Republic of China
Implemented on October 1, 1994
Chemical Industry Standard of the People's Republic of China
Subject Content and Scope of Application
IG/T2562-94
This standard specifies the technical requirements, inspection methods, inspection rules and marking, packaging, transportation and storage of dispersant N. This standard applies to dispersant N prepared by condensation of quinoasulfonic acid and aldehyde and neutralization, which is mainly used in printing and dyeing, dyes, fur, rubber and construction industries
Referenced StandardswwW.bzxz.Net
GB/T 2381
GB/T 2383
GB/T 2386
GB/ T 5550
GB/T 5551
GBT 6366
GB/ T 6368
3 Technical requirements
Determination method for insoluble matter in dyes
Determination method for sieving fineness of dyes
Sputtering determination method for water content in dyes and dye intermediates Determination of release force
Fur Surfactants
Surfactants
Surfactants
Textile auxiliaries Determination method for total calcium and magnesium content in release agents Titration method for inorganic sulfate content
Determination of pH value of surfactant aqueous solution Potentiometric method 3.1. Appearance: Beige homogeneous powder. 3.2 The quality indexes of micro-agent N shall meet the requirements of the following table: No.
Dispersibility (for standard product), %
Sodium sulfate content, %
pII value (1% aqueous solution)
Total content of calcium and magnesium ions, %
Content of impurities insoluble in water, %
Fineness (residue passing through a sieve with an aperture of 300um), %Water content, %
Test method
4.1 Appearance
First-class product approved by the Ministry of Chemical Industry of the People's Republic of China on February 9, 1994
Qualified product
7. 0 ~9. 0
1994-10-01Implementation
4.2 Determination of dispersion force
According to GB/T5550,
4.3 Determination of sodium sulfate content
According to GB／T6366
4.4 Determination of pH value
According to GB/T6368
4.5 Determination of total calcium and magnesium ion content
According to GB/T5551
4.6 Determination of water-insoluble impurities
According to Chapter 1 of GB/T2381, 4.7 Determination of fineness
HG / T 2562 -- 94
According to GB/T2383, the specifications of the standard sieve used are 300um aperture and 0.12mm wire diameter. 4.8 Determination of moisture content
According to the provisions of Article 2 of GB/T2386. The drying temperature is 100-105℃. 5. Inspection rules
5. Inspection classification
Items (1), (2), (3) and (4) in the table of Article 3.1 and Article 3.2 of this standard are factory inspection items. Items (5), (6) and (7) in the table of Article 3.2 of this standard are regular inspection items. At least 1-2 batches shall be inspected every month. All items in this standard are type inspection items. If any of the six situations specified in 6.6.1 of GB 1.3 is met, type inspection shall be carried out.
5.2 Sampling method
Dispersant N takes uniform products as a batch and takes 10% of the packaging samples from each batch of products: the sampling of small batch products shall not be less than 3 bags. Before sampling, remove the dust around the bag to prevent impurities from falling into the product. Use a sampling tube to take samples from the white bag (including the upper, middle and lower samples). The total number of samples should not be less than 200. Mix the samples thoroughly and divide them into two clean and dry glass bottles. Seal them with wax, one bottle for inspection and one bottle for storage. The bottle label should indicate the manufacturer's name, product name, batch number and sampling date. 5.3 Manufacturer Inspection
Dispersant N should be inspected by the quality inspection department of the manufacturer. The manufacturer should ensure that each batch of dispersant N products shipped out of the factory complies with the provisions of this standard and is accompanied by a quality certificate in a certain format. 5.4 User Acceptance
The user unit should follow the inspection methods for various indicators specified in this standard. Accept the quality of the dispersant N products used. 5.5 Re-test
If one of the indicators in the test results does not meet the requirements of this standard, a sample should be taken from the double amount of packaging for re-test. If the re-test results do not meet the requirements of this standard, the product is considered unqualified. 5.6 Arbitration
When the two parties have disputes over product quality and need arbitration, the arbitration institution can be selected by negotiation between the two parties. The arbitration should be conducted in accordance with the inspection methods specified in this standard.
6 Marking, packaging, transportation, storage
6.1 The packaging container should be marked with the manufacturer's name, product name, trademark, this standard number, grade, batch number, weight, gross weight and production date:
6.2 Dispersant N is packaged in bags or barrels lined with plastic bags. 2
JIG/T2562-94
6.3 It should be lightly packed and lightly printed during transportation. The product should be stored in a dry and ventilated place for two years. Additional instructions:
This standard was proposed by the Technical Supervision Department of the Ministry of Chemical Industry of the People's Republic of China and is under the jurisdiction of Shanghai Institute of Materials. This standard was drafted by Shanghai Institute of Dyestuffs. The main drafters of this standard are Ling Peijiang, Wu Jinglei and Ji Jufen. From the date of publication of this standard, the original national standard GB9295-88 "Dispersant N" will be used. People's Republic of China
Chemical Industry Standard
HG/T 2562 - 94
Editor: Chemical Industry Standard Editorial Department
(Chemical Industry Standardization Institute)
Postal Code: 100013
Printing: Chemical Industry Standard Promotion Institute
Copyright reserved. No reproduction allowed
Format: 880×12301/16 Sheets/6Number of Words: 50004994 First Printing: July 1994
First Edition: June 1994
Number: 1 500
Cost: 1.90 Yuan
IIG/T 2562 -- 94
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.