JB/T 3411.16-1999 Dimensions of square socket set screws
time:
2024-08-04 03:22:05
- JB/T 3411.16-1999
- in force
Standard ID:
JB/T 3411.16-1999
Standard Name:
Dimensions of square socket set screws
Chinese Name:
内四方紧定螺钉 尺寸
Standard category:
Machinery Industry Standard (JB)
-
Date of Release:
1999-05-20 -
Date of Implementation:
2000-01-01
Standard ICS number:
Mechanical Manufacturing>>Machine Tools>>25.080.01 General Machine ToolsChina Standard Classification Number:
Machinery>>Metal Cutting Machine Tools>>J52 Machine Tool Accessories and Accessories
alternative situation:
JB 3426-1983
Focal point Organization:
Mechanical Science Research InstitutePublishing Department:
Mechanical Science Research Institute
Description (Translated English) / downloadSkip to download
Summary:
JB/T 3411.16-1999 This standard is a revision of JB 3426-83 "Dimensions of Square Socket Set Screws". Only the following points were modified during the revision, and the main technical content remained unchanged. ——Writing format; ——Standard plus English name; ——Related reference standards and related content; ——Thread drawing method. This standard specifies the types and dimensions of square socket set screws. JB/T 3411.16-1999 Dimensions of Square Socket Set Screws JB/T3411.16-1999 Standard download decompression password: www.bzxz.net
Standard contentSome standard content:
ICS25.080.01
Machinery Industry Standard of the People's Republic of China
JB/T3411.16-1999
Dimensions of internal square set screws
Internal square setscrewsDimensions1999-05-20 Issued
National Bureau of Machinery Industry
Implementation on 2000-01-01bzxZ.net
1 Scope
Machinery Industry Standard of the People's Republic of China
Dimensions of internal square set screws
Internal square setscrews—DimensionsThis standard specifies the types and dimensions of internal square set screws. Types and dimensions
The types and dimensions are as specified in the following figures and tables. Approved by the State Bureau of Machinery Industry on May 20, 1999, JB/T3411.16—1999
Replaced JB342683
Implemented on January 1, 2000
Basic dimensions
Limit deviation D11
Note: Dimensions in brackets should not be used as much as possible, 3 Marking
Marking example:
JB/T3411.16—1999
d-M6, L=6mm internal square set screw: screw M6×6
5JB/T3411.16-199
Mechanical industry standard||tt| |Size of square socket set screws
JB/T3411.16-1999
Published by the Machinery Standardization Research Institute of the Ministry of Machinery Industry Printed by the Machinery Standardization Research Institute of the Ministry of Machinery Industry (No. 2 Shouti South Road, Beijing: Postal Code 100044)*
Book size 880×1230
X number of characters xXX,XXX
Sheet X/X
Xth printing in XX month, 19XX
Xth edition in XX month, 19XX
Number of prints 1-XXX
Price XXXXX Yuan
XX-XXX
6661911 /
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
Machinery Industry Standard of the People's Republic of China
JB/T3411.16-1999
Dimensions of internal square set screws
Internal square setscrewsDimensions1999-05-20 Issued
National Bureau of Machinery Industry
Implementation on 2000-01-01bzxZ.net
1 Scope
Machinery Industry Standard of the People's Republic of China
Dimensions of internal square set screws
Internal square setscrews—DimensionsThis standard specifies the types and dimensions of internal square set screws. Types and dimensions
The types and dimensions are as specified in the following figures and tables. Approved by the State Bureau of Machinery Industry on May 20, 1999, JB/T3411.16—1999
Replaced JB342683
Implemented on January 1, 2000
Basic dimensions
Limit deviation D11
Note: Dimensions in brackets should not be used as much as possible, 3 Marking
Marking example:
JB/T3411.16—1999
d-M6, L=6mm internal square set screw: screw M6×6
5JB/T3411.16-199
Mechanical industry standard||tt| |Size of square socket set screws
JB/T3411.16-1999
Published by the Machinery Standardization Research Institute of the Ministry of Machinery Industry Printed by the Machinery Standardization Research Institute of the Ministry of Machinery Industry (No. 2 Shouti South Road, Beijing: Postal Code 100044)*
Book size 880×1230
X number of characters xXX,XXX
Sheet X/X
Xth printing in XX month, 19XX
Xth edition in XX month, 19XX
Number of prints 1-XXX
Price XXXXX Yuan
XX-XXX
6661911 /
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
- Recommended standards
- GB/T 16470-1996 Pallet package
- JB/T 50170-1999 Energy consumption classification of electric furnace for smelting white corundum
- GB/T 2900.61-2002 Electrical terminology - physics and chemistry
- GB/T 15098-2008 The principle of classification of transport packaging groups of dangerous goods
- GB 8241-1987 Terminology of ship cabin equipment
- GB 18111-2000 Gas-fired volumetric water heaters GB18111-2000
- GB/T 3564-1993 Classification, names and main terms of bicycle parts
- GB/T 3780.18-1998 Carbon black in natural rubber formulation and identification method
- GB/T 15956-1995 Steel drums for domestic calcium carbide packaging
- JB/T 8027.1-1999 Machine tool fixture parts and component supports
- HG 2272-1992 A201 ammonia synthesis catalyst
- GB/T 15376-1994 Precision of ordinary woodworking lathes
- GB/T 15077-1994 Methods for measuring geometric dimensions of precious metals and their alloys
- HG/T 2294-1992 Rubber high voltage cap for color television
- JB/T 9887-1999 Technical requirements for boring heads of modular machine tools
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail：[email protected]