JB/T 8353.1-1996 Parameters of full vertical motor rotor die casting machine

This standard specifies the basic parameters of full vertical motor rotor die casting machines. This standard is applicable to rotor presses that mainly produce motor rotors and have horizontal mold parting surfaces. JB/T 8353.1-1996 Full vertical motor rotor die casting machine parameters JB/T8353.1-1996 Standard download decompression password: www.bzxz.net

Machinery Industry Standard of the People's Republic of China
JB/T 8353. 1- 96
Parameters of Full Vertical Motor Rotor Die Casting Machine
1996-04-11 Issued
Ministry of Machinery Industry of the People's Republic of China
1996.10.01 Implementation
JB/T8353.1-96
This standard shall be implemented from October 1, 1996. This standard is proposed by the National Machinery Standardization Technical Committee and belongs to:. The drafting unit of this standard is Nanyushi Machinery Factory. The main drafters of this standard are Wei Shaoqiao, Chang Shuibing and Wu Haiyun. This standard was issued on April 11, 1986. 1 Scope
Standard of the Machinery Industry of the People's Republic of China
Fully vertical motor rotor die casting machine
This standard specifies the basic parameters of fully vertical electric track rotor die casting machine (hereinafter referred to as the die casting machine). This standard is applicable to the production of derailed rotors, with the wheel reversing machine with horizontally arranged parting surface. 2 Referenced Standards
JB/T8353.1-96
The following standards contain clauses that become the clauses of this standard through reference in this standard. The versions shown at the time of publication of the standard are valid, and all standards will be used by all parties using this standard to discuss the possibility of using the latest version of the following standard. TB/T3UHH-91 Static Manufacturing Equipment Model End Method 3 Model
The design of the die casting machine shall comply with the provisions of B/S00G, 4 Basic References
4.! The main parameter of the rotary press is the clamping force. The basic parameters of the 4.2 rotary press are shown in Table 1. Table 1 Basic parameters of rotary presses
Including clamping force
asicik
Drawing distance
Inner dimensions
420×120
50X520
630X620
YSuxYsO
5UX650www.bzxz.net
950×950
1101180
Pressure holding depth
Note: The above parameters may not be implemented for special orders. Approved by the Ministry of Machinery Industry on April 11, 1996
Double-day force
Maximum injection force
Maximum number of pieces per week
Times of air cycle
Implemented on October 1, 1996
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.