INdex
GB standard
Standard category
Machinery Industry
It standard
Industry Standard
Chemical Industry It standard Petrochemical ZB Industry Light industry Railway industry Shipping industry Measurement standards

GB/T 4910-1985 Tinned round copper wire

time: 2024-08-05 03:13:28
  • GB/T 4910-1985
  • in force

Basic Information

  • Standard ID:

    GB/T 4910-1985

  • Standard Name:

    Tinned round copper wire

  • Chinese Name:

    镀锡圆铜线

  • Standard category:

    National Standard (GB)

  • Date of Release:

    1985-01-31

  • Date of Implementation:

    1985-01-02

standard classification number

  • Standard ICS number:

    Electrical engineering>>Wires and cables>>29.060.10 Wires

  • China Standard Classification Number:

    Electrical Engineering>>Electrical Materials and General Parts>>K11 Bare Wire

associated standards

Publication information

Other Information

  • Release date:

    1985-01-31

  • Review date:

    2004-10-14

  • Drafting Organization:

    Shanghai Cable Institute

  • Focal point Organization:

    National Wire and Cable Standardization Technical Committee

  • Publishing Department:

    National Bureau of Standards

  • Competent Authority:

    China Electrical Equipment Industry Association
Introduction to standardsDescription (Translated English) / download

Skip to download

Summary:

This standard applies to tinned soft round copper wire used in the manufacture of wires, cables and electrical products. It is referred to as tinned copper wire. GB/T 4910-1985 Tinned round copper wire GB/T4910-1985 Standard download decompression password: www.bzxz.net
Standard contentStandard content

Some standard content:

Scope of application
National Standard of the People's Republic of China
Tinned round copper wire
Tiaaed rodnd copper wire
This standard applies to tinned soft round copper wire used in the manufacture of wires, cables and electrical products. It is referred to as tinned copper wire. Standards adopted
This standard adopts the following standards:
GB4909-85 "Test methods for bare wires" 8.
GB3953-83 "Electrical round copper wire"bzxZ.net
GB728~-65 "Tin classification and technical conditions" GB3048-83 "Test methods for electrical properties of wires and cables" Model
The model of tinned copper wire is shown in Table 1.
Indication method
Copper wire is indicated by model, specification and number of this standard. For example: the nominal diameter of 0.50mm solderable tinned soft round copper wire is expressed as: Name
Tinned soft round copper wire
Solderable tinned soft round copper wire
TXRH 0.5 GB 4910--85
The specifications of tinned copper wire are shown in Table 2.
Note: other specifications are subject to agreement between the supply and demand parties. National Bureau of Standards 19B5-01-81 Issued
Specification range (d) mm
0.05 ~4. 00
0.20 ~1.20
UDC 21.815.51
GB 4910—86
1985-12-01 Implementation
5.1 Copper wire shall comply with the provisions of GB3953.
GB 4910—85
6.2 Tin shall comply with the provisions of GB728 and shall not be less than No. 2 tin. Dimensional deviation
The nominal diameter and deviation of tinned copper wire shall comply with the provisions of Table 3. Table 3
Nominal diameter d
0.050d-0.125
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
  • Recommended standards
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail：wymp4wang@gmail.com