
JB/T 8690-1998 Noise Limits for Industrial Fans
time:
2024-08-01 20:12:23
- JB/T 8690-1998
- in force
Standard ID:
JB/T 8690-1998
Standard Name:
Noise Limits for Industrial Fans
Chinese Name:
工业通风机 噪声限值
Standard category:
Machinery Industry Standard (JB)
-
Date of Release:
1998-03-19 -
Date of Implementation:
1998-07-01
Standard ICS number:
Fluid systems and general parts >> 23.120 Ventilators, fans, air conditionersChina Standard Classification Number:
Machinery>>General Machinery and Equipment>>J72 Compressor, Fan

Skip to download
Summary:
JB/T 8690-1998 JB/T 8690-1998 Noise Limits for Industrial Fans JB/T8690-1998 Standard download decompression password: www.bzxz.net

Some standard content:
JB/T8690
This standard is proposed and managed by the National Technical Committee for Standardization of Fans. The drafting unit of this standard is Shenyang Blower Research Institute. The main drafters of this standard are Chen Mingliang, Peng Xiuman and Jiang Yunzhu.
Mechanical Industry Standard of the People's Republic of China
Industrial Fans
Noise Limit
Industrial Fans Noise Limited Value This standard applies to general centrifugal and axial flow fans. JB/T 8690--1998
This standard does not apply to roof, vortex, special high pressure and other types of fans and fans with special requirements for noise. 2 Referenced Standards
The provisions contained in the following standards constitute the provisions of this standard through reference in this standard. When this standard is published, the versions shown are valid. All standards will be revised, and parties using this standard should explore the possibility of using the latest versions of the following standards. GB/T2888--91 Noise measurement method for fans and Roots blowers 3 Fan noise measurement and noise limit
3.1 The measurement conditions, equipment and methods of fan noise shall be implemented in accordance with GB/T2888. 3.2
The specific A sound level LsA limit of various types of fan noise at the best efficiency operating point shall comply with the provisions of Table 1. Table 1
Fan type
Forward blade centrifugal fan
Backward plate blade centrifugal fanwwW.bzxz.Net
Wing blade centrifugal fan
Radial blade centrifugal fan
Axial flow fan
Specific A sound level LsA
Note: If the requirements of Table 1 cannot be met or there are special requirements for noise, it should be stipulated in the contract between the buyer and the seller. 3.3 The calculation formula of the specific A sound level of the fan noise at the test operating point is: LsA = LA - 10 1g (Qp2) + 19. 8
Wherein: LsA-
Specific A sound level of the fan inlet (or outlet), dB; A sound level of the fan inlet (or outlet), dB (A); Flow rate of the fan at the test operating point, m/min; Total pressure of the fan at the test operating point, Pa.
Approved by the Ministry of Machinery Industry of the People's Republic of China on March 19, 1998 352
Measurement location
According to GB/T2888
Implementation on July 1, 1998
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
This standard is proposed and managed by the National Technical Committee for Standardization of Fans. The drafting unit of this standard is Shenyang Blower Research Institute. The main drafters of this standard are Chen Mingliang, Peng Xiuman and Jiang Yunzhu.
Mechanical Industry Standard of the People's Republic of China
Industrial Fans
Noise Limit
Industrial Fans Noise Limited Value This standard applies to general centrifugal and axial flow fans. JB/T 8690--1998
This standard does not apply to roof, vortex, special high pressure and other types of fans and fans with special requirements for noise. 2 Referenced Standards
The provisions contained in the following standards constitute the provisions of this standard through reference in this standard. When this standard is published, the versions shown are valid. All standards will be revised, and parties using this standard should explore the possibility of using the latest versions of the following standards. GB/T2888--91 Noise measurement method for fans and Roots blowers 3 Fan noise measurement and noise limit
3.1 The measurement conditions, equipment and methods of fan noise shall be implemented in accordance with GB/T2888. 3.2
The specific A sound level LsA limit of various types of fan noise at the best efficiency operating point shall comply with the provisions of Table 1. Table 1
Fan type
Forward blade centrifugal fan
Backward plate blade centrifugal fanwwW.bzxz.Net
Wing blade centrifugal fan
Radial blade centrifugal fan
Axial flow fan
Specific A sound level LsA
Note: If the requirements of Table 1 cannot be met or there are special requirements for noise, it should be stipulated in the contract between the buyer and the seller. 3.3 The calculation formula of the specific A sound level of the fan noise at the test operating point is: LsA = LA - 10 1g (Qp2) + 19. 8
Wherein: LsA-
Specific A sound level of the fan inlet (or outlet), dB; A sound level of the fan inlet (or outlet), dB (A); Flow rate of the fan at the test operating point, m/min; Total pressure of the fan at the test operating point, Pa.
Approved by the Ministry of Machinery Industry of the People's Republic of China on March 19, 1998 352
Measurement location
According to GB/T2888
Implementation on July 1, 1998
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
- Recommended standards
- GB/T 2522-1988 Test method for interlayer resistance and coating adhesion coefficient of electrical steel sheets (strips)
- GB/T 15590-1995 Method for determination of microscopic coal and rock types
- QB/T 1641-1992 Chemical analysis method for gypsum for ceramics
- QB/T 2376-1998 Method for compiling product models of wine-making machinery
- JB/T 3411.98-1999 Tool holder dimensions for radial tool holders
- GB 17051-1997 Hygienic specification for secondary water supply facilities
- JB/T 5253.1-1991 Special wrench for technical conditions of random special tools for steam turbines
- GB/T 15692.9-1995 Pharmaceutical machinery terminology Other pharmaceutical machinery and equipment
- JB/T 8645-1997 Submersible screw pump
- SY/T 10016-1998 Technical specification for offshore towed 3D seismic data acquisition
- JB/T 5056.1-1991 Network planning technical terminology graphic symbols
- JB/T 10045.1-1999 Thermal cutting methods and classification
- JB/T 6647-1993 Determination of total carbon content in carbides - Gas volumetric method
- GB/T 3857-1987 Test method for chemical resistance of glass fiber reinforced thermosetting plastics
- JB/T 2647-1995 Technical requirements for belt conveyor packaging
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail:bzxznet@163.com