GB/T 15752-1995 Basic terminology for circular arc cylindrical gears
time:
2024-08-08 15:28:06
- GB/T 15752-1995
- in force
Standard ID:
GB/T 15752-1995
Standard Name:
Basic terminology for circular arc cylindrical gears
Chinese Name:
圆弧圆柱齿轮基本术语
Standard category:
National Standard (GB)
-
Date of Release:
1995-01-01 -
Date of Implementation:
1996-07-01
Standard ICS number:
Mechanical systems and general parts >> 21.200 Gears and gear transmissionsChina Standard Classification Number:
Machinery>>General Parts>>J17 Gears and Gear Drives
Release date:
1995-11-23Review date:
2004-10-14Drafter:
Zhang Tingjian, Shao Jiahui, Chen Zhanwen, Li Changchun, Chen Yuan, Li Gang, Xu Yongnian, Liu Shijun, Zhang YishiDrafting Organization:
Zhengzhou Mechanical Research InstituteFocal point Organization:
National Technical Committee for Gear StandardizationProposing Organization:
Ministry of Machinery Industry of the People's Republic of ChinaPublishing Department:
State Bureau of Technical SupervisionCompetent Authority:
National Standardization Administration
Description (Translated English) / downloadSkip to download
Summary:
This standard specifies the terms and definitions of circular arc cylindrical gear (single circular arc cylindrical gear and double circular arc cylindrical gear) transmission. This standard is applicable to various circular arc cylindrical gear transmissions. For common terms not included in this standard, please refer to the corresponding referenced standards. GB/T 15752-1995 Basic terms of circular arc cylindrical gears GB/T15752-1995 Standard download decompression password: www.bzxz.net
- Recommended standards
- HG 3287-2000 Malathion TC
- JB/T 9739.2-2000 Pulleys for truck cranes and tire cranes
- HG 2714.2-1995 Inflatable life raft type B
- GB/T 15296-1994 General technical requirements for transportable satellite communication earth station equipment
- JB/T 7111-1993 High voltage shunt capacitor device
- GB/T 13400.1-1992 Terms used in network planning techniques
- SY/T 5061-1993 Limestone powder for drilling fluid
- GB/T 2951.1-1997 General test methods for cable insulation and sheath materials Part 1: General test methods Section 1: Thickness and overall dimensions measurement - Mechanical properties test
- HG/T 3647-1999 Cold-resistant conveyor belt
- SY 6354-1998 Safety technical regulations for heavy oil thermal recovery by steam injection
- JB/T 6520-1992 Calculation method for thrust bearings of steam turbines
- JB/T 9019.2-1999 Technical requirements for screw-type gate hoists
- FZ/T 92018-2001 Flat steel ring
- GB 16895.14-2002 Electrical installations in buildings Part 7: Requirements for special installations or locations Section 703: Locations with sauna heaters
- JB/T 7085.2-1993 Guidelines for stator and rotor winding process of series-excited motors for power tools Part 2: Rotor symmetric winding process
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail：bzxznet@163.com