GB/T 14693-1993 Symbols for non-destructive testing of welds
time:
2024-08-09 07:43:14
- GB/T 14693-1993
- Abolished
Standard ID:
GB/T 14693-1993
Standard Name:
Symbols for non-destructive testing of welds
Chinese Name:
焊缝无损检测符号
Standard category:
National Standard (GB)
-
Date of Release:
1993-11-09 -
Date of Implementation:
1994-07-01 -
Date of Expiration:
2008-07-01
Standard ICS number:
Mechanical manufacturing>>Welding, brazing and low-temperature welding>>25.160.40 Welded jointsChina Standard Classification Number:
Metallurgy>>Methods for testing physical and chemical properties of metals>>H26 Nondestructive testing methods for metals
alternative situation:
Replaced by GB/T 14693-2008
Release date:
1993-11-09Review date:
2004-10-14Drafter:
Xie Yinglong, Jiang ShouhaoDrafting Organization:
Harbin Welding Research Institute of the Ministry of Machinery IndustryFocal point Organization:
National Technical Committee for Nondestructive Testing StandardizationProposing Organization:
Ministry of Machinery Industry of the People's Republic of ChinaPublishing Department:
State Bureau of Technical SupervisionCompetent Authority:
National Standardization Administration
Skip to download
Summary:
This standard specifies the symbolic representation method for nondestructive testing of welds. This standard applies to nondestructive testing of welds. When this standard is applied, it refers to testing the welded parts or components after welding. This standard can also provide a reference for the provisions of nondestructive testing symbols for castings or forgings. GB/T 14693-1993 Symbols for nondestructive testing of welds GB/T14693-1993 Standard download decompression password: www.bzxz.net
- Recommended standards
- SJ 20706-1998 PCI local bus specification
- YC/T 37.2-2002 Determination of physical properties of filter rods Part 2: Circumferential laser method
- JB/T 7067-2002 Column type voltage regulator
- GB/T 5009.34-2003 Determination of sulfite in food
- GB 50217-1994 Design specification for power engineering cables
- NY 5078-2002 Pollution-free food cowpea
- GB 5170.14-1985 Basic parameter verification methods for environmental test equipment for electrical and electronic products - Electric vibration table for vibration (sinusoidal) test
- GB/T 4675.5-1984 Weldability test - Test method for maximum hardness of weld heat affected zone
- JB/T 9855-1999 General technical requirements for die-cast aluminum alloys for rock drilling machinery and pneumatic tools
- GB/T 17842-1999 Computer application symbols for shipbuilding and offshore structures
- JB/T 5346-1998 Series Reactor
- GB/T 8646-1998 Semiconductor bonding aluminum-1% silicon filaments
- GB 18361-2001 Safety requirements for lithium bromide absorption chillers (warm water chillers)
- JB/T 7278-1994 Power output shaft for walking tractors
- GB/T 50283-1999 Unified standard for reliability design of highway engineering structures
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail:bzxznet@163.com