GB/T 3832.3-2004 Broach handles Part 3: Cylindrical shanks

This part of GB/T3832 specifies the types and basic dimensions of cylindrical rear shanks for broaches. This part is applicable to cylindrical rear shanks with a shank diameter D1 of 12 mm to 100 mm. GB/T 3832.3-2004 Broach shanks Part 3: Cylindrical rear shanks GB/T3832.3-2004 Standard download decompression password: www.bzxz.net

ICs 25. 103. 25
National Standard of the People's Republic of China
GB/T3832.3—2004
Generation GB/T3632.31933
Broach shanks
Part 3: Cylindrical follower shanks
Bruachts shanks-Part 3, Round follower end2004-02-10Issued
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of ChinaStandardization Administration of the People's Republic of China
2004-08-01ImplementationWww.bzxZ.net
GBT3832 This standard for broaches is divided into one part: Part 1: Rectangular follower shanks;
Part 2: Cylindrical follower shanks
Part 1: Round follower shanks.
This part is the first part of GHT3832:
CB/T3832.3—2004
This part is a revision of GB/3832.31983, and has the following changes compared with B/T8892.3-1983: Title: Changes in the type and basic size of the handle of the tool part 2: The new test code of the handle only lists the height tolerance
From the implementation of this part, it will be replaced by GB/T3832.3B1983.
The core part is brought out by China Machinery Industry Federation, and this part will be used as the jurisdiction of the county standardization technical committee. This part was drafted by Harbin First Machinery Factory. The main drafters of this part are Luo Shui, Chen Ketian, Zhou Wen, and Qu Bianhua. This part must replace the standard GB/-3852.3-1943.
1 Scope
Broach handles Part 3: Cylindrical shanks
This part of GB/1282 specifies the styles and basic dimensions of cylindrical shanks. The standard part uses a shank diameter of 2mm--199mm. 2 Types and sizes
Example The following types are divided into two types: [Specification - Format type,
2. 11 Type size
Type 1 Table
Integral type
GB/T 3832.3—2004
Unit price is as follows
GB/T 3532.3--2004
2.2μ Type size 4
Dimensions are connected 2, 3, 4, Table 2. Table 3 is for reference only Figure 2 I type -
Stand-alone joint part
Depth setting
Assembled type
Figure 3 Joint
Unit price is as follows
Figure 4 Broach connection part
GR/T 3832.3-7001
Ganshan Jingmi
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.