INdex
GB standard
Standard category
Machinery Industry
It standard
Industry Standard
Chemical Industry It standard Petrochemical ZB Industry Light industry Railway industry Shipping industry Measurement standards

GB/T 3746.1-1983 Compression-type cross-type pipe joints

time: 2024-08-10 20:20:00
  • GB/T 3746.1-1983
  • Abolished

Basic Information

  • Standard ID:

    GB/T 3746.1-1983

  • Standard Name:

    Compression-type cross-type pipe joints

  • Chinese Name:

    卡套式四通管接头

  • Standard category:

    National Standard (GB)

  • Date of Release:

    1983-06-17

  • Date of Implementation:

    1984-04-01

  • Date of Expiration:

    2008-11-01

standard classification number

  • Standard ICS number:

    21.060.60;

  • China Standard Classification Number:

    Machinery>>General Parts>>J15 Pipe Accessories

associated standards

Publication information

  • publishing house:

    China Standards Press

  • Publication date:

    1984-04-01

Other Information

  • Release date:

    1983-06-17

  • Review date:

    2004-10-14

  • Drafting Organization:

    Standardization Institute of the Ministry of Machinery Industry

  • Focal point Organization:

    National Technical Committee for Standardization of Pipe Accessories

  • Publishing Department:

    China Machinery Industry Federation

  • Competent Authority:

    China Machinery Industry Federation
Introduction to standardsDescription (Translated English) / download

Skip to download

Summary:

GB/T 3746.1-1983 Compression sleeve type cross pipe joint GB/T3746.1-1983 standard download decompression password: www.bzxz.net
Standard contentStandard content

Some standard content:

National Standard of the People's Republic of China
Compression-type cross-pipe fittings
Ualon cross-Assembly
UDC 621.643.4
GB 3746.1—83
This standard specifies compression-type cross-pipe fittings, which are suitable for piping systems of oil, gas and general corrosive media. GR3746.283
Marking example:
Nominal pressure level, pipe outer diameter D, 14mm ferrule type four-way pipe joint: pipe joint J14
GB 3746,183wwW.bzxz.Net
National Bureau of Standards 1983-06-17 Issued
GH 3759—#3
GB 3764-83
1984-04-01 Implementation
Nominal pressure
Pipe outer diameter
GB 8746.1—88
Note that the quantity is calculated value, and the specific gravity is 7.85kg/dm3. The technical conditions shall be in accordance with the provisions of GB
3765—83.
Additional Notes:
Wrench Size
This standard was proposed by the Ministry of Machinery Industry of the People's Republic of China and is under the jurisdiction of the Standardization and Promotion Institute of the Ministry of Machinery Industry. mm
(kg/100 pieces)
This standard was drafted by the Standardization Institute of the Ministry of Machinery Industry, and was drafted by Shenyang Heavy Machinery Plant, Chongqing Heavy Automobile Research Institute, Dalian Combined Machine Tool Research Institute, Zhejiang Haiyan County Pipe Fittings Factory, Shanghai No. 1 Mechanical and Electrical Bureau Science and Technology Information Institute, and the 78th Institute of the Ministry of Aerospace. The main drafters of this standard are Hu Lusheng, Liu Dequan, Cheng Zhensheng, and Wang Muqin. From the date of implementation of this standard, the original ministry standard JB1949-77 "Cut-type Cross-way Pipe Connection" shall be used as the standard.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
  • Recommended standards
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail：bzxznet@163.com