INdex
GB standard
Standard category
Machinery Industry
It standard
Industry Standard
Chemical Industry It standard Petrochemical ZB Industry Light industry Railway industry Shipping industry Measurement standards

GB/T 3507-1983 Nominal torque series of mechanical couplings

time: 2024-08-10 22:23:21
  • GB/T 3507-1983
  • Abolished

Basic Information

standard classification number

  • Standard ICS number:

    Mechanical systems and general parts>>Shafts and couplings>>21.120.20 Couplings, clutches, friction devices

  • China Standard Classification Number:

    Machinery>>General Parts>>J19 Couplings, Brakes and Transmissions

associated standards

Publication information

  • publishing house:

    China Standards Press

  • Publication date:

    1983-12-01

Other Information

  • Release date:

    1983-02-23

  • Review date:

    2004-10-14

  • Drafting Organization:

    Machinery Standardization Institute

  • Focal point Organization:

    National Technical Committee for Standardization of Machine Shafts and Accessories

  • Publishing Department:

    National Bureau of Standards

  • Competent Authority:

    National Standardization Administration
Introduction to standardsDescription (Translated English) / download

Skip to download

Summary:

This standard applies to the nominal torque series transmitted by general-purpose mechanical couplings. GB/T 3507-1983 Nominal torque series of mechanical couplings GB/T3507-1983 Standard download decompression password: www.bzxz.net
Standard contentStandard content

Some standard content:

National Standard of the People's Republic of China
Nominal torque series of the mechanicai couplingUDC621.825
GB3507---83
This standard applies to the nominal torque series transmitted by mechanical couplings for general purposes. When selecting the coupling torque, the values ​​of series 1 should take precedence over those of series 2, and the values ​​of series 2 should take precedence over those of series 3. The nominal torque value of mechanical couplings for general purposes should be selected from the following table. If the torque value is greater than the value specified in this standard, it can be selected according to the R20 series specified in (13321-80 "Preferred Numbers and Preferred Number Systems". The international unit system is preferred: 1kgl·m=9.80665N·m-10N·m Series
National Bureau of Standards 1983-02-23 Issued
3 Series
2 Series
198312-01 Implementation
GB3507-83
3 Series
10 000
25 000
100 000
160000
250 000
10 000
16 000
25 000
31 500
40 000
100000
125000
200 000
250 000
11 200
20 000
56 000
90 000
100000bZxz.net
112000
125000
140000
160000
180000
200000
224000
250 000
280000
630 000
Additional instructions:
315000
400 000
500000
800 000
GB3507—83
315000
355000
400 000
500 000
630 000
710 000
800 000
This standard is proposed by the Ministry of Machinery Industry of the People's Republic of China. 1
1000000
1600 000
2 series
1000 000
1250 000
1600 000
2000000
This standard was drafted by the Standardization Research Institute of the Ministry of Machinery Industry and the Xi'an Heavy Machinery Research Institute. The main drafter of this standard is Li Zhenghao.
900000
1000 000
1120000
12511000
1400000
1600000
1800 000
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
  • Recommended standards
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail：[email protected]