JB/T 9141.4-1999 Test method for compression rate and rebound rate of flexible graphite sheet
time:
2024-09-21 17:37:03
- JB/T 9141.4-1999
- in force
Standard ID:
JB/T 9141.4-1999
Standard Name:
Test method for compression rate and rebound rate of flexible graphite sheet
Chinese Name:
柔性石墨板材 压缩率、回弹率测试方法
Standard category:
Machinery Industry Standard (JB)
-
Date of Release:
1999-06-28 -
Date of Implementation:
2000-01-01
Standard ICS number:
Mechanical systems and general parts >> 21.140 Seals and sealing devicesChina Standard Classification Number:
Machinery>>General Parts>>J22 Seals and Sealing Devices
alternative situation:
ZB J22012-1989
Drafter:
Liu DongyiDrafting Organization:
Hefei General Machinery Research InstituteFocal point Organization:
Packing Static Seal Standardization Technical CommitteeProposing Organization:
Packing Static Seal Standardization Technical CommitteePublishing Department:
State Machinery Industry Bureau
Description (Translated English) / downloadSkip to download
Summary:
This standard specifies the test equipment and devices for testing the compression rate and rebound rate of flexible graphite sheets, the requirements for the test specimens, the test procedures and the calculation of the results. This standard is applicable to the test of the compression rate and rebound rate of flexible graphite sheets. JB/T 9141.4-1999 Test method for compression rate and rebound rate of flexible graphite sheets JB/T9141.4-1999 Standard download decompression password: www.bzxz.net
- Recommended standards
- GB/T 5382.1-1996 Test method for braking performance of motorcycles and mopeds - Braking distance
- GB 18040-2000 Emergency rescue equipment at civil aviation transport airports
- HG/T 2916-1997 Diethanolamine for industrial use
- GB 5370-1985 Shallow sea immersion test method for antifouling paint samples
- GB/T 9851.4-2008 Terminology of graphic technology - Part 4：Terms for planographic printing
- DL/T 575.10-1999 Ergonomic principles for the design of control centres Part 10 : Principles of environmental requirements
- QB 2654-2004 Hand Sanitizer
- HG/T 20570.6-1995 Pipe diameter selection
- HG 20559.2-1993 Graphic symbols for piping instrument flow chart equipment
- JB/T 6013-2000 Technical Specifications for Low-pressure Metal Oil Pipe Assemblies for Diesel Engines
- GB/T 10613-1989 Round and square perforation plate screens--Thickness of 3 mm and above
- GB 3734.2-1983 Compression-type tapered thread straight-through fitting body
- JB/T 9732-1999 Standard pintle type fuel injection nozzle assembly
- GB/T 5165-1985 Determination of oil content of permeable sintered metal materials
- JB/T 7303-1994 Technical requirements for road sweepers
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail：bzxznet@163.com